Претраживање
Приказ резултата 1-10 од 4410
Littoral eutrophication indicators are more closely related to nearshore land use than to water nutrient concentrations: A critical evaluation of stressor-response relationships
(Elsevier, 2020)
Biological assessmentmetrics and water chemistry measurements are used to quantify the link between stressors
and their effects on lake ecosystems, for the Water Framework Directive. However, correlations between ...
The contributions of high- and low altitude emission sources to the near ground concentrations of air pollutants
(Elsevier Science Inc, New York, 2008)
The scale of transport through the atmosphere depends on the effective height of an emission source, the meteorological conditions and the physico-chemical characteristics of the pollutants. Atmospheric surface temperature ...
Effect of Anions on the Underpotential Deposition of Cu on kPt(lll) and Pt(100) Surfaces
(American Chemical Society (ACS), 1993)
The effect of chloride and (bi)sulfate anions in the supporting acid electrolyte on the chemistry of underpotential deposition of Cu on Pt(111) and Pt(100) single crystal surfaces was studied using a combination of ...
Chemical Composition of Currant Seed Extracts and Their Protective Effect on Human Lymphocytes DNA
(Wiley-Blackwell, Hoboken, 2012)
On the basis of LC/UV/MS analysis, 35 compounds from the extracts of seeds of black, red, and white currants (2 cultivars of each) were identified. Black currants cultivars contained protocatechuic acid and p-hydroxybenzoic ...
Degradation of transformer oil on the basis of polychlorinated bifenyls without degrading the existing quality of the environment / Degradacija transformatorskog ulja na bazi polihlorovanih bifenila bez narušavanja postojećeg kvaliteta životne sredine
(Elektroprivreda, 2003)
This paper deals with results of laboratory experiments referring to transformer oil chemical degradation on the basis of polychlorinated bifenyls, results referring to rinsing of transformer insulation material, as well ...
The roughness analysis of metal coatings by STM technique part III: Analysis of copper coatings electrodeposited with thiourea as brightening additive / Analiza hrapavosti galvanskih prevlaka tehnikom skenirajuće tunelske mikroskopije III deo - analiza prevlaka bakra istaloženih sa tioureom kao aditivom za sjaj
(Belgrade, Serbia : Engineering Society for Corrosion, 2003)
In this work is given the analysis of roughness of copper coatings electrodeposited from a sulfate bath in the presence of thiourea, by methodology which is described in part I of this work. It was shown that the ...
Solvent effects on structural changes in self-healing epoxy composites
(Elsevier, 2020)
Nowadays, there is a very high importance of composite research and variety of their applications in the modern world. In that sense, we researched hollow glass capillaries filled with dissolved Grubbs catalyst (GC) and ...
Benchmarking density functional tight binding models for barrier heights and reaction energetics of organic molecules
(Wiley, Hoboken, 2017)
Density Functional Tight Binding (DFTB) models are two to three orders of magnitude faster than ab initio and Density Functional Theory (DFT) methods and therefore are particularly attractive in applications to large ...
Determination of the absolute hardness of electrolytically produced copper coatings by application of the Chicot-Lesage composite hardness model / Одређивање апсолутне тврдоће електролитички добијених превлака бакра применом Chicot-Lesage композитног модела тврдоће
(Belgrade : Serbian Chemical Society, 2022)
In this study, a novel procedure, based on application of the Chicot–Lesage (C–L) composite hardness model, was proposed for the determination of an absolute hardness of electrolytically produced copper coatings. The Cu ...
Fatigue endurance design of plates with two semicircular edge notches and one quarter-elliptical corner crack or through-the-thickness crack
(Elsevier, 2019)
This paper presents an investigation on the failure of plates with double-edge notches and fatigue damage. The
main aim is to develop a computational model for estimating the behaviour of a quarter-elliptical corner crack ...