Претраживање
Приказ резултата 1-10 од 19
The shape of the polarization curve and diagnostic criteria for control of the metal electrodeposition process
(Serbian Chemical Society, 2016)
The simulated shapes of the polarization curves were correlated with the type of metal electrodeposition process control as a function of the ratio of the exchange current density to the limiting diffusion current density ...
Supercapacitors based on graphene/pseudocapacitive materials
(Serbian Chemical Society, 2017)
Composites of graphene and SnO2 were successfully prepared by a single step simultaneous synthesis of SnO2 and reduction of graphene oxide (GO). Three different compositions of precursor solution resulted in different ...
Study on the morphology and thermomechanical properties of poly(urethane-siloxane) networks based on hyperbranched polyester / Proučavanje morfologije i termomehaničkih svojstava umreženih poli(uretan-siloksana) na bazi hiperrazgranatog poliestra
(Association of Chemical Engineers of Serbia, 2013)
Two series of polyurethane films based on hyperbranched polyester of the second pseudo-generation (Boltorn®), 4,4'-methylenediphenyl diisocyanate and two different siloxane prepolymers, α,ω-dihydroxy-(ethylene oxide-poly ...
Preparation and characterization of poly(Urethane-siloxane)/titanium-dioxide nanocomposites
(Belgrade : Association of the Chemical Engineers of Serbia, 2019)
This work is focused on preparation of poly(urethane-siloxane)/titanium-dioxide nanocomposites (PUSNs) with enhanced features. PUSNs were prepared by the in situ polymerization reaction using titanium-dioxide as a nano-filler ...
Characterization and Morphology of Copper Powder Particles as a Function of Different Electrolytic Regimes
(Esg, Belgrade, 2010)
The effect different deposition regimes (constant and reversing currents), on the powdered copper electrodeposits morphology were investigated. The results obtained in constant regimes were compared with those obtained in ...
Electrical Conductivity of Lignocellulose Composites Loaded with Electrodeposited Copper Powders. Part III. Influence of Particle Morphology on Appearance of Electrical Conductive Layers
(Esg, Belgrade, 2012)
The electrical conductivity of the system based on lignocellulose (LC) biopolymer matrix filled with electrodeposited copper powder has been studied. Galvanostatically produced copper powder, having highly porous, highly ...
The use of salicylaldehyde derivatives as a nitrogen source for antibiotic production by Streptomyces hygroscopicus CH-7
(Association of Chemical Engineers of Serbia, 2017)
In the present work, four derivatives of salicylaldehyde (salicylaldehyde-hydrazone, phenylhydrazone, semicarbazone and thiosemicarbazone) were synthesized using both conventional (95% ethanol) and green (crude glycerol ...
Impact of the poly(propylene oxide)-b-poly(dimethylsiloxane)-b-poly-(propylene oxide) macrodiols on the surface-related properties of polyurethane copolymers
(Assoc Chemical Engineers Serbia, Belgrade, 2016)
Segmented thermoplastic polyurethane copolymers (PURs) were synthesized using 4,4'-methylenediphenyl diisocyanate and 1,4-butanediol as the hard segment and alpha,omega-dihydroxy-poly(propylene oxide)-b-poly(dimethylsilo ...
Morphology of Fe-Ni alloy powders electrodeposited from citrate-sulfate containing solutions / Morfologija prahova Fe-Ni legura elektrohemijski istaloženih iz citratno-sulfatnih rastvora
(Belgrade, Serbia : Engineering Society for Corrosion, 2011)
The electrochemical deposition of the Fe-Ni alloy powders from citrate-sulfate containing electrolytes of different Ni/Fe ions concentration ratios at pH 4.5 was examined by the polarization measurements. All polarization ...
Electrodeposition of cobalt powders with novel three-dimensional structure
(Metalurgija, 2011)
Novel three-dimensional cobalt powder structures were successfully prepared by electrodeposition. Electrodeposited cobalt powder was characterized by scanning electron microscopy (SEM) and light microscopy. It was possible ...