Претраживање
Приказ резултата 1-10 од 21
Morphology and capacitive properties of [RuOxH y/low-surface area carbon black] composite materials prepared by sol-gel procedure
(Materials Science Forum, 2005)
The morphology and the capacitive properties of carbon supported hydrous ruthenium oxide (RuOxHy/C), prepared by impregnation of low-surface area carbon black Vulcan® XC-72 R with solid phase of RuO xHy sol, were investigated ...
Phase composition and magnetic properties of multiphase melt-spun Nd 4.3Fe76.2B19.5alloy
(Materials Science Forum, 2007)
Phase transformations and magnetic properties of multiphase Nd 4.5Fe76.2B19.5 alloy were investigated in the temperature range of heat treatment 600-700°C. The influence of different heat treatment regimes was observed by ...
Mass transfer and fluid flow visualization in packed and fluidized beds by the adsorption method
(Maik Nauka/Interperiodica/Springer, New York, 2009)
Mass transfer coefficient (j D ) between fluid and column wall in liquid packed and fluidized beds of spherical inert particle has been studied experimentally using adsorption method. Experiments were conducted in column ...
Segmented thermistors printed by NTC nanometric paste and applied in volume air-flow sensors
(Materials Science Forum, 2006)
An investigation path starting from (Mn,Ni,Co,Fe)3O4 nanometric powder preparation, NTC thick-film characterization, realization and optimization of new planar thermistor geometries to custom design thermistors and their ...
Electrochemical behavior of 5-substituted 2-alkylidene-4-oxothiazolidine derivatives studied by cyclic voltammetry
(Maik Nauka/Interperiodica/Springer, New York, 2007)
This study demonstrates the electrochemical activity of selected 2-alkylidene-4-oxothiazolidine compounds containing different substituents at the C5-position on the Pt-electrode in 0.1 M TBAHFP + MeCN in the potential ...
Investigation of the effects of Ar plasma etching in Si surface by photoacoustic method
(EDP Sciences, 2005)
The effects of Ar plasma treatment on the Si surface were investigated by photoacoustic spectroscopy and atomic force microscopy. We studied the surface structure as a function of plasma experimental parameters to correlate ...
Nanoscale topography of GC/Pt-C and GC/Pt-Ru-C electrodes studied by means of STM, AFM and XRD methods
(Materials Science Forum, 2006)
Electrodes, assigned as GC/Pt-C and GC/Pt-Ru-C, were formed by deposition of Pt-based catalysts (47.5 wt % Pt + high surface area carbon) and (54 wt. % Pt-Ru alloy + high surface area carbon) on glassy carbon (GC) discs. ...
Hydrogenation of soybean oil over Ag-Ni/diatomite catalysts. Effect of silver content on the cis/trans isomerization selectivity
(Materials Science Forum, 2006)
Silver promoted nickel catalysts supported on diatomite were prepared by precipitation method. Characterization of the catalysts prepared with different silver contents (0.1-4.0 wt%) included AAS, XRD, Hg porosimetry, BET ...
Yb3+ doped dyphillosilicates prepared by thermally induced phase transformation of zeolites
(Maik Nauka/Interperiodica/Springer, New York, 2007)
Yb3+-doped Ba and Sr diphyllosilicates (hexacelsians) have been synthesized using the Na form of LTA zeolite by ion-exchange procedure and thermal treatment. The crystal structures of both doped samples are refined and ...
Examinations of cross-linked polyvinylpyridine in open reactor
(Materials Science Forum, 2005)
Macroporous cross-linked copolymer of 4-vinylpyridine and 25% (4:1) divinylbenzene is analyzed under open conditions, that is in a continuous well-stirred tank reactor (CSTR). With this aim the appropriate bifurcation ...