Претраживање
Приказ резултата 11-20 од 34
Optimization of process of the honeycomb-like structure formation by the regime of reversing current (RC) in the second range
(Springer-Verlag, 2020)
Formation of the honeycomb-like electrodes of copper by the regime of reversing current (RC) in the second range has been
investigated. Morphological and structural characteristics of this electrode type obtained by various ...
Mechanism of formation of the honeycomb-like structures by the regime of the reversing current (RC) in the second range
(Elsevier, 2019)
Electrodeposition of copper in the hydrogen co-deposition range by the regime of reversing current (RC) in the second range has been investigated by determination of the average current efficiency for hydrogen evolution ...
Influence of the magnetic field and magnetoresistance on the electrodeposition of Ni nanocontacts in thin films and microwires
(Elsevier, 2004)
We present a study of electrodeposition of Ni nanocontacts in thin film and microwires gaps under an external applied magnetic field. The study is performed in comparison with electrodeposition of Cu that is not a magnetic ...
Formation of dish-like holes and a channel structure in electrodeposition of copper under hydrogen co-deposition
(Elsevier, 2007)
Copper electrodeposition from acid sulfate solutions at an overpotential of 1000 mV, which is about 250 mV outside the plateau of the limiting diffusion current density, was examined by the determination of the average ...
Palladium-copper bimetallic nanocatalyst for electrochemical ethanol oxidation and oxygen reduction in alkaline media
(Lausanne, Switzerland : International Society of Electrochemistry, 2023)
The necessity of replacement of traditional energy sources with renewable and green alternatives has initiated vast research of direct alcohol fuel cells (DAFC). Ethanol is non-toxic and its crossover through a membrane ...
XRF and LIBS measuring on metal and ceramic laser-cleaned surfaces
(Budapest: International Measurement Confederation (IMEKO), 2016)
The use of lasers in the conservation of artefacts plays an important role since its posibilities of safe, efficient and efective cleaning on complex surfaces and wide range of materials. This paper presents the results ...
Structural, Electrical and Mechanical Behavior of Thin Copper Coatings Obtained by Various Electrodeposition Processes
(Institute of Electrical and Electronics Engineers (IEEE), 2021)
Electrochemically deposited copper coatings obtained from sulfate baths on brass substrates in the regime of direct current (DC) with and without an application of ultrasound mixing of electrolytes (DC/US) have been studied. ...
Palladium-copper bimetallic surfaces as electrocatalysts for the ethanol oxidation in an alkaline medium
(Elsevier, 2023)
Two types of Cu-modified Pd catalysts supported on high area carbon were prepared: Pd nanoparticles modified with a sub-monolayer of underpotentially deposited Cu (Cu@Pd/C) and Pd-Cu alloy nanoparticles (Pd-Cu/C), and ...
Removal of heavy metals from aqueous solutions using natural and Fe(III) oxyhydroxide clinoptilolite
(Springer, 2013)
The increasing levels of industrial wastewater released to the environment present a serious
threat to human health, living resources, and ecological systems. Fe-modified zeolites were developed and tested for removal of ...
Morphologies of copper deposits obtained by the electrodeposition at high overpotentials
(Elsevier, 2006)
Morphologies of copper deposits obtained at overpotentials belonging to the plateau of the limiting diffusion current density and at higher
overpotentials were examined by the scanning electron microscopy (SEM) technique. ...