Претраживање
Приказ резултата 21-30 од 49
Some aspects of current density distribution in electrolytic cells I: Dendritic growth of cadmium at the cathode edge in galvanostatic electrodeposition
(Elsevier, 1983)
The equivalent electrical resistance of a cell with plane parallel electrodes is described by a simple mathematical model. The limits of this model were determined experimentally. The relation between the overpotential at ...
Electrodeposition of silver powder by pulsating and reversing currents
(Springer Nature Switzerland AG 2020, 1991)
The effect of the shape of the current wave and frequency in silver deposition by pulsating and reversing currents on the morphology of powder particles were investigated. The possibility of obtaining particles with different ...
Electrodeposited AgPd alloy coatings as efficient catalysts for the ethanol oxidation reaction
(Oxford : Pergamon-Elsevier Science Ltd, 2018)
The Pd and three AgPd alloy layers (AgPd1, AgPd2 and AgPd3) were electrodeposited onto Au disc electrodes from the solution containing high concentration of chloride ions (>12 M). All coatings were investigated by scanning ...
The potentiostatic current transients and the role of local diffusion fields in formation of the 2D lead dendrites from the concentrated electrolyte
(Elsevier, 2015)
Electrodeposition of lead from the concentrated nitrate electrolyte in the potentiostatic regime of electrolysis has been investigated by the analysis of the potentiostatic current transients and scanning electron microscope ...
TiO2/SnO2 photocatalyst formed by plasma electrolytic oxidation
(Elsevier, 2017)
TiO2/SnO2 coatings are formed by plasma electrolytic oxidation of titanium substrate in supporting electrolyte (10 g/L Na3PO4 center dot 12H(2)O) with addition of various concentrations of SnO2 particles. Photocatalytic ...
Synergetic effect of additives on the hardness and adhesion of thin electrodeposited copper films
(Faculty of Technical Sciences in Cacak, 2017)
Thin copper films were electrodeposited on a polycrystalline cold-rolled copper substrate. The composition of the laboratory-made copper sulphate electrolyte was changed by the addition of various additives. The influence ...
Aluminium electrodeposition under novel conditions from AlCl3–urea deep eutectic solvent at room temperature
(Elsevier, 2020)
The electrodeposition of aluminium on glassy carbon and aluminium substrates from AlCl3–urea deep eutectic solvent (DES) system at near room temperatures was investigated, without additional purification of the chemicals ...
Morphology of Electrochemically and Chemically Deposited Metals
(Springer Science and Business Media LLC, 2016)
This book describes the newest achievements in the area of electrochemically and chemically deposited metals and alloys. In particular, the book is devoted to the surface morphology of deposited metals and alloys. It ...
Effect of parameters of pulsating current (PC) regimes on morphology of electrodeposited copper in hydrogen co-deposition range
(Serbian Chemical Society, Belgrade, 2010)
The most often employed electrolytes for the electrodeposition of copper are those based on aqueous solutions of sulfuric acid (H2SO4) and cupric sulfate (CuSO4). There is an ionic equilibrium of a lot of species in the ...
Morphology and internal structure of copper deposits electrodeposited by the pulsating current regime in the hydrogen co-deposition range
(Springer, New York, 2012)
The effect of the regime of pulsating current (PC) on copper electrodeposition in the hydrogen co-deposition range was examined by the techniques of scanning electron and optical microscopes. The quantities of evolved ...