Search
Now showing items 21-30 of 49
Influence of potential pulse conditions on the formation of honeycomb-like copper electrodes
(Elsevier, 2009)
Electrodeposition of copper by pulsating overpotential (PO) regime in the hydrogen co-deposition range was examined by the determination of the average current efficiency of hydrogen evolution and by microscopic analysis ...
Morphology and internal structure of copper deposits electrodeposited by the pulsating current regime in the hydrogen co-deposition range
(Springer, New York, 2012)
The effect of the regime of pulsating current (PC) on copper electrodeposition in the hydrogen co-deposition range was examined by the techniques of scanning electron and optical microscopes. The quantities of evolved ...
Application of pulsating overpotential regime on the formation of copper deposits in the range of hydrogen co-deposition
(Springer, New York, 2010)
Electrodeposition of copper by pulsating overpotential (PO) regime in the range of hydrogen co-deposition was examined by scanning electron microscopy. It was found that the increase of the pause-to-pulse ratio produced a ...
Synergetic effect of additives on the hardness and adhesion of thin electrodeposited copper films
(Faculty of Technical Sciences in Cacak, 2017)
Thin copper films were electrodeposited on a polycrystalline cold-rolled copper substrate. The composition of the laboratory-made copper sulphate electrolyte was changed by the addition of various additives. The influence ...
Electrochemical Activity of Thin-Film Pd Catalysts Modified with Bi for Methanol and Ethanol Oxidation Reaction in Alkaline Solution
(ESG, 2020)
Thin-film Pd catalysts with low metal loadings (55 and 110 µg cm-2) were obtained by electrodeposition from a surfactant-free green electrolyte on glassy carbon (GC) electrode. Pd/GC catalysts were modified by addition of ...
Mechanism of formation of the honeycomb-like structures by the regime of the reversing current (RC) in the second range
(Elsevier, 2019)
Electrodeposition of copper in the hydrogen co-deposition range by the regime of reversing current (RC) in the second range has been investigated by determination of the average current efficiency for hydrogen evolution ...
Protective properties of cataphoretic epoxy coating on aluminium alloy AA6060 modified with electrodeposited Ce-based coatings: Effect of post-treatment
(Elsevier Science Sa, Lausanne, 2015)
Ce-based conversion coatings (CeCCs) are a promising alternative to toxic chromate coatings on the metal substrates. In this work the CeCCs were electrodeposited on aluminium alloy AA6060 from aqueous solution of Ce(NO3)(3) ...
Structural characteristics of bright copper surfaces
(Journal of Electroanalytical Chemistry, 2001)
In this work, the structures of copper surfaces polished mechanically and polished both mechanically and electrochemically, as well as copper coatings obtained in the presence of basic and top brightening addition agents ...
Corrosion protection of aluminium by a cataphoretic epoxy coating
(Elsevier, 1999)
The corrosion behavior and thermal stability of epoxy coating electrodeposited on aluminium have been investigated during exposure to
3% NaCl. Electrochemical impedance spectroscopy (EIS), gravimetric liquid sorption ...
Effect of parameters of pulsating current (PC) regimes on morphology of electrodeposited copper in hydrogen co-deposition range
(Serbian Chemical Society, Belgrade, 2010)
The most often employed electrolytes for the electrodeposition of copper are those based on aqueous solutions of sulfuric acid (H2SO4) and cupric sulfate (CuSO4). There is an ionic equilibrium of a lot of species in the ...