Претраживање
Приказ резултата 51-60 од 84
Analysis of morphologies of magnetic nanocontacts obtained by electrochemical deposition and their magnetoresistance / Analiza morfologija elektrohemijski dobijenih magnetnih nanokontakta i njihova magnetorezistencija
(Belgrade, Serbia : Engineering Society for Corrosion, 2005)
In this work, morphologies of Fe - Fe, Co - Co and Ni81Fel9 – Ni81Fe19 nanocontacts obtained by the electrode position were analyzed. The obtained nanocontacts showed a very large ballistic magnetoresistance. It was shown ...
Solvatochromism of N-aryl-phenylacetamides / Solvatohromizam N-aril-fenilacetamida
(Belgrade, Serbia : Engineering Society for Corrosion, 2016)
Amide derivates are biologically active compounds and they are widely used in all spheres of life. Therefore, it is very important to know their physical-chemical properties. In this work the influence of characteristics ...
New method of Ni/WC and Cu/WC composite coatings formation / Novi način formiranja kompozitnih prevlaka
(Belgrade, Serbia : Engineering Society for Corrosion, 2004)
Ni/WC and Cu/WC composite coatings were obtained in two steps. The first step consists of the inert WC particles deposition from the aqueous solution onto steel surface by means of a micro-pipette and covering by the dilute ...
Activated titanium anodes in cathodic protection: A comparison of the characteristics of anodes prepared by sol-gel procedure and thermal decomposition / Aktivirane titanske anode u katodnoj zaštiti - poređenje karakteristika anoda dobijenih sol-gel postupkom i termičkom razgradnjom
(Belgrade, Serbia : Engineering Society for Corrosion, 2004)
Polarization characteristics of titanium anodes, coated by active RuO2-TiO2 binary oxide using sol-gel preparation procedure and chloride thermal decomposition, in oxygen evolution reaction during anode electrolytic ...
The kinetics of passivation based on the reduction of current density under potentiostatic conditions for a martensitic stainless steel / Kinetika pasivizacije bazirane na redukciji gustine struje pri potenciostatskim uslovima za martenzitni nerđajući čelik
(Belgrade, Serbia : Engineering Society for Corrosion, 2016)
The potentiostatic method and the theory of 'topochemical reactions' in the kinetics of the active dissolution and passivation process of AISI 420 stainless steel were studied. It was found that, to a great extent, the ...
CO tolerant Pt/Ru0.7Ti0.3O2 nanocatalyst for hydrogen oxidation reaction / Pt/Ru0,7Ti0,3O2 kao nanokatalizator za oksidaciju vodonika i njegova tolerancija na CO
(Belgrade, Serbia : Engineering Society for Corrosion, 2018)
The oxidation of pure H2 and H2/CO mixture (100 ppm CO) was investigated on Pt nanocatalyst supported on Ru0.7Ti0.3O2 (Pt /Ru0.7Ti0.3O2) by linear sweep voltammetry at a rotating disc electrode in 0.1 M HClO4. The results ...
Influence of welding current intensity on pitting corrosion resistance in welded joint of stainless steel X5CrNi18-10 / Uticaj jačine struje zavarivanja na otpornost prema piting koroziji zavarenog spoja nerđajućeg čelika X5CrNi18-10
(Belgrade, Serbia : Engineering Society for Corrosion, 2017)
The effect of welding current on the pitting corrosion resistance in the welded joint of austenitic stainless steel X5CrNi18-10 was tested. Welding was carried out using three different current intensity (110 A, 130 A and ...
Morphology of Ni-Mo-O alloy powders electrodeposited from ammonium sulfate solutions / Morfologija prahova Ni-Mo-O legura istaloženih elektrohemijskim postupkom iz rastvora amonijum sulfata
(Belgrade, Serbia : Engineering Society for Corrosion, 2008)
The electro deposition of the Ni-Mo-O alloy powders from ammonium sulfate containing electrolytes of different Ni/Mo ions concentration ratios was investigated by the polarization measurements. In all electrolytes similar ...
The effect of preparation of aluminum surface on surface roughness / Uticaj pripreme površine aluminijuma na površinsku hrapavost
(Belgrade, Serbia : Engineering Society for Corrosion, 2004)
Aluminum samples were electrochemically polished in one of three solutions for electrochemical polishing. On those samples the surface roughness was measured. The effect of the anode treatment on surface roughness was also ...
The effect of deposition time on the structure of the top coating of nickel electrodeposited onto aluminum / Uticaj vremena taloženja na strukturu završne prevlake nikla na aluminijumu
(Belgrade, Serbia : Engineering Society for Corrosion, 2004)
The microstructure of the chemical coating of zinc on aluminum, as well as electrodeposited nickel coating on chemically deposited zinc were investigated with change of one parameter only-deposition time. Based on the ...