Претраживање
Приказ резултата 1-10 од 30
Characterization and Morphology of Copper Powder Particles as a Function of Different Electrolytic Regimes
(Esg, Belgrade, 2010)
The effect different deposition regimes (constant and reversing currents), on the powdered copper electrodeposits morphology were investigated. The results obtained in constant regimes were compared with those obtained in ...
Supercapacitors based on graphene/pseudocapacitive materials
(Serbian Chemical Society, 2017)
Composites of graphene and SnO2 were successfully prepared by a single step simultaneous synthesis of SnO2 and reduction of graphene oxide (GO). Three different compositions of precursor solution resulted in different ...
Morphology and Structure of Electrolytically Synthesized Tin Dendritic Nanostructures
(MDPI, 2022)
The formation of tin dendritic nanostructures by electrolysis from the alkaline electrolyte
has been investigated. Morphology and structure of Sn dendrites produced applying both potentiostatic and galvanostatic regimes ...
The shape of the polarization curve and diagnostic criteria for control of the metal electrodeposition process
(Serbian Chemical Society, 2016)
The simulated shapes of the polarization curves were correlated with the type of metal electrodeposition process control as a function of the ratio of the exchange current density to the limiting diffusion current density ...
Study on the morphology and thermomechanical properties of poly(urethane-siloxane) networks based on hyperbranched polyester / Proučavanje morfologije i termomehaničkih svojstava umreženih poli(uretan-siloksana) na bazi hiperrazgranatog poliestra
(Association of Chemical Engineers of Serbia, 2013)
Two series of polyurethane films based on hyperbranched polyester of the second pseudo-generation (Boltorn®), 4,4'-methylenediphenyl diisocyanate and two different siloxane prepolymers, α,ω-dihydroxy-(ethylene oxide-poly ...
Influence of Parameters and Regimes of the Electrodeposition on Hardness of Copper Coatings
(MDPI, 2023)
Correlation among morphological, structural and hardness characteristics of electrodeposited
copper coatings is presented in this review paper. Cu coatings were produced applying constant galvanostatic (DC) and pulsating ...
Preparation and characterization of poly(Urethane-siloxane)/titanium-dioxide nanocomposites
(Belgrade : Association of the Chemical Engineers of Serbia, 2019)
This work is focused on preparation of poly(urethane-siloxane)/titanium-dioxide nanocomposites (PUSNs) with enhanced features. PUSNs were prepared by the in situ polymerization reaction using titanium-dioxide as a nano-filler ...
Electrical Conductivity of Lignocellulose Composites Loaded with Electrodeposited Copper Powders. Part III. Influence of Particle Morphology on Appearance of Electrical Conductive Layers
(Esg, Belgrade, 2012)
The electrical conductivity of the system based on lignocellulose (LC) biopolymer matrix filled with electrodeposited copper powder has been studied. Galvanostatically produced copper powder, having highly porous, highly ...
The use of salicylaldehyde derivatives as a nitrogen source for antibiotic production by Streptomyces hygroscopicus CH-7
(Association of Chemical Engineers of Serbia, 2017)
In the present work, four derivatives of salicylaldehyde (salicylaldehyde-hydrazone, phenylhydrazone, semicarbazone and thiosemicarbazone) were synthesized using both conventional (95% ethanol) and green (crude glycerol ...
Morphology, Structure and Mechanical Properties of Copper Coatings Electrodeposited by Pulsating Current (PC) Regime on Si(111)
(MDPI, 2020)
Copper electrodeposition on (111)-oriented Si substrate was performed by the pulsating current (PC) regime at various average current densities in the range of 15–70 mA·cm−2, obtained by varying either the frequency (30, ...