Претраживање
Приказ резултата 11-20 од 46
Influence of the Shape of Copper Powder Particles on the Crystal Structure and Some Decisive Characteristics of the Metal Powders
(MDPI, 2019)
Three different forms of Cu powder particles obtained by either galvanostatic electrolysis or a non-electrolytic method were analyzed by a scanning electron microscope (SEM), X-ray diffraction (XRD) and particle size ...
Influence of microstructure and roughness level on corrosion resistance of the austenitic stainless steel welded joint
(Wiley, 2021)
The influence of microstructure and surface roughness of the X5CrNi18-10 austenitic stainless steel-welded joint on resistance to uniform, pitting, and intergranular corrosion, as well as on the stability of the passive ...
Correlation between crystal structure and morphology of potentiostatically electrodeposited silver dendritic nanostructures
(Elsevier, 2018)
Silver dendritic nanonstructures obtained by the potentiostatic electrolysis from different electrolytes at different overpotentials were characterized by the scanning electron microscopy (SEM) technique and X-ray diffraction ...
Synthesis and properties of bis(pyrrolidino)fullerenes bridged by a flexible alkyl-tether
(Oxford : Pergamon-Elsevier Science Ltd, 2015)
The one-pot bistycloaddition of alkyl-tethered diglycines to C-60 provided five series of bridged bis(pyrrolidino)fullerenes with good regioselectivity, giving mainly cis-2 and cis-3 products. An influence of the bridge ...
Laser cleaning of the archaeological metal sample from the Danube / Istraživanje mogućnosti primene lasera u čišćenju arheoloških metalnih predmeta
(Belgrade, Serbia : Engineering Society for Corrosion, 2018)
The paper presents the results of laser cleaning of corrosive and other deposits on a metal archaeological artefact from the Danube. Nd: YAG laser, energy up to 750 mJ and wavelengths λ = 1064 nm and 532 nm is used. The ...
Structural investigation of mechanically activated ZnO powder
(Elsevier, 2015)
Commercially available ZnO powder was mechanically activated in a planetary ball mill. In order to investigate the specific surface area, pore volume and microstructure of non-activated and mechanically activated ZnO powders ...
Structural characterization and electrical properties of sintered magnesium-titanate ceramics
(Elsevier, 2013)
In this article the influence of ball miling process on structure of MgO-TiO2 system, as well as the electrical properties of samples after sintering, was investigated. The mixtures of MgO-TiO2 powders were mechanically ...
Structural properties of Co, Ni and Mo powders obtained by electrochemical deposition
(Metalurgija, 2011)
Magnetic thin films based on iron group elements (Fe, Co, Ni) are currently used in computer's hard disk drives and in MEMS, whereas electrodeposition is a suitable method to obtain these materials. The powders of metals ...
The particle size distribution (PSD) as criteria for comparison of silver powders obtained by different methods of synthesis and by conditions of electrolysis
(Bor : Technical Faculty, 2018)
Silver powders produced by both electrochemical (galvanostatic (DC) and potentiostatic (POT) regimes of electrolysis) and chemical processes were examined by scanning electron microscope, and particle size distribution ...
Morphology and Structure of Electrolytically Synthesized Tin Dendritic Nanostructures
(MDPI, 2022)
The formation of tin dendritic nanostructures by electrolysis from the alkaline electrolyte
has been investigated. Morphology and structure of Sn dendrites produced applying both potentiostatic and galvanostatic regimes ...