Претраживање
Приказ резултата 31-40 од 66
Removal of ethylene oxide from waste gases by absorption / Uklanjanje etilen-oksida iz otpadnih gasova postupkom apsorpcije
(Association of Chemical Engineers of Serbia, 2011)
Ethylene oxide (EtO) is an organic compound, which is used as a starting material in the production of polymers and as sterilizing agent for thermolabile materials. Although ethylene oxide is not common as an organic ...
Glycidyl methacrylate macroporous copolymer grafted with diethylene triamine as sorbent for Reactive Black 5 / Makroporozni kopolimer na bazi glicidilmetakrilata funkcionalizovan sa dietilentriaminom kao sorbent tekstilne boje Reactive Black 5
(Assoc Chemical Engineers Serbia, Belgrade, 2014)
In this paper, macroporous glycidyl methacrylate and ethylene glycol dimethacrylate copolymer functionalized with diethylene triamine (PGME-deta), was evaluated as Reactive Black 5 (RB5) sorbent. Batch RB5 removal from ...
Momentum, heat, and mass transfer analogy for vertical hydraulic transport of inert particles / Analogija prenosa količine kretanja, toplote i mase pri vertikalnom hidrauličkom transportu inertnih čestica
(Association of Chemical Engineers of Serbia, 2014)
Wall-to-bed momentum, heat and mass transfer in the vertical liquid-solids flow, as well as in the single phase flow, were studied. The aim of this investigation was to establish the analogy among those phenomena. Also, ...
Oxidation of hydroxide ions at platinum-modified zeolite electrode / Izvod oksidacija hidroksilnih jona na zeolitu modifikovanom platinom
(Association of Chemical Engineers of Serbia, 2012)
NaX zeolite was modified by platinum via impregnation/thermal decomposition technique, using Pt(II)-acetyl acetonate in acetone as an impregnating solution. The samples were characterized by scanning electron microscopy ...
Determination of the ozone volumetric mass transfer coefficient in bubble column with two-fluid nozzle gas distributor / Određivanje zapreminskog koeficijenta prenosa mase ozona u barbotažnoj koloni sa dvofluidnom mlaznicom
(Association of Chemical Engineers of Serbia, 2015)
Experimental investigation of gas-liquid mass transfer of ozone in water, in bubble column with two-fluid nozzle gas distributor (BKDM), under different operating conditions, is presented in this work. The main objective ...
Surface characterization, hemo- and cytocompatibility of segmented poly(dimethylsiloxane)-based polyurethanes / Površinska karakterizacija, hemo- i citokompatibilnost segmentiranih poliuretana na bazi poli(dimetilsiloksana)
(Association of Chemical Engineers of Serbia, 2014)
Segmented polyurethanes based on poly(dimethylsiloxane), currently used for biomedical applications, have sub-optimal biocompatibility which reduces their efficacy. Improving the endothelial cell attachment and blood-contacting ...
Impact of the poly(propylene oxide)-b-poly(dimethylsiloxane)-b-poly-(propylene oxide) macrodiols on the surface-related properties of polyurethane copolymers
(Assoc Chemical Engineers Serbia, Belgrade, 2016)
Segmented thermoplastic polyurethane copolymers (PURs) were synthesized using 4,4'-methylenediphenyl diisocyanate and 1,4-butanediol as the hard segment and alpha,omega-dihydroxy-poly(propylene oxide)-b-poly(dimethylsilo ...
Rheological behaviour of thermoplastic poly(ester-siloxane)s / Reološko ponašanje termoplastičnih poli(estar-siloksana)
(Association of Chemical Engineers of Serbia, 2010)
Two series of thermoplastic elastomers (TPES), based on poly(dimethylsiloxane) (PDMS) as the soft segment and poly(butylene terephthalate) (PBT) as the hard segment, were analyzed by dynamic mechanical spectroscopy. In the ...
Response surface optimisation for activation of bentonite with microwave irradiation / Optimalno faktorno planiranje procesa kiselinske aktivacije bentonita u mikrotalasnom polju
(Association of Chemical Engineers of Serbia, 2011)
In this study, the statistical design of the experimental method was applied on the process of acid activation of bentonite with microwave irradiation. The influence of activation parameters (time, acid normality and ...
The peculiarities of electrochemical deposition and morphology of Zn-Mn alloy coatings obtained from pyrophosphate electrolyte / Specifičnosti elektrohemijskog taloženja i morfologija Zn-Mn prevlaka dobijenih iz pirofosfatnog elektrolita
(Association of Chemical Engineers of Serbia, 2011)
The first successful attempt to electrodeposit Zn-Mn alloy coatings from alkaline bath was made only a few years ago. In this kind of solution, potassium pyrophosphate (K4P2O7) serves both as a complexing agent and as the ...