Претраживање
Приказ резултата 11-20 од 88
Catalytic activity of sulfuric acid on the morphology of electrochemically obtained copper powder / Katalitičko delovanje sumporne kiseline na morfologiju elektrohemijski dobijenog bakarnog praha
(Belgrade, Serbia : Engineering Society for Corrosion, 2015)
The subject of the research is influence of sulfuric acid on morphology of electrochemically obtained copper powder during galvanostatic electrolysis mode. In this paper electrodeposition of copper powder from sulphate ...
Ternary Bi-Cu-Ni alloys – thermodynamics, characterization, mechanical and electrical properties
(Serbia : Association of Metallurgical Engineers of Serbia, 2017)
The Bi–Cu–Ni ternary system belongs to the group of potential Cu-Ni-based advanced lead-free solder materials for high temperature application. The paper shows results of the thermodynamic calculations using general solution ...
The extract of fennel fruit as a potential natural additive in food industry / Ekstrakt ploda morača kao potencijalni prirodni aditiv u prehrambenoj industriji
(Poljoprivredni fakultet, Beograd, 2018)
In this study, the polyphenol profile and antioxidant activity of the hydro-ethanolic extract of the fennel fruit were examined in order to investigate the possibility of its application as a potential functional food ...
Determination of inorganic anions in herbal tea infusions using ion chromatography / Određivanje neorganskih jona u rastvoru biljnih čajeva jonskom hromatografijom
(Serbia : Matica srpska, 2018)
The ionic content was examined in nine aqueous tea extracts in which time of boiling, acidification of the medium using lemon juice and way of preparation were observed as factors. Ion chromatography was used for determination ...
Treatment of waste sulfuric acid copper electrolyte / Tretman otpadnog sumporno-kiselog elektrolita bakra
(Institut za rudarstvo i metalurgiju Bor, 2014)
The aim of this paper was to investigate the possibility of using the copper anodes with high nickel content for electrolytic treatment of waste sulfuric acid copper electrolyte. Nickel content in each anode was about 10 ...
Chemical and electrochemical dissolution of chromium at room and elevated temperatures / Hemijsko i elektrohemijsko rastvaranje hroma na sobnoj i na povišenim temperaturama
(Institut za rudarstvo i metalurgiju Bor, 2015)
The influence of temperature on electrochemical and chemical dissolution of chromium was studied in the acidic sulphuric solutions. The hydrogen evolution reaction, as well as the anodic dissolution and chemical dissolution ...
Influence of process parameters on properties of the 4a zeolite with X-ray and FT-IR instrumental methods characterization / Uticaj procesnih parametara na osobine 4a zeolita uz karakterizaciju X-ray i FT-IR instrumentalnim metodama
(Inženjersko društvo za koroziju, 2018)
For more than three decades 4A zeolite has been an irreplaceable ingredient of powder
detergents, but there is still striving to it’s improvement in order to meet the ever more stringent
market and environmental ...
Mechanical and electrical properties of ternary Ag-Bi-Ga system at 250 °C
(Serbia : Association of Metallurgical Engineers of Serbia, 2017)
This paper presents a comparative review of the experimental and thermodynamic assessment of a ternary Ag-Bi-Ga system. An isothermal section at 250 °C was calculated using optimized thermodynamic data for the constitutive ...
Wear resistance improvement of thermal plant fan mill impact plates based on numerical flow simulation
(Society for Structural Integrity and Life, Institute for Material Testing, 2017)
Numerical simulation of 3D multiphase flow is performed to determine the velocity field in the fan mill. The mixture model of the Euler-Euler approach is used. Recirculating gas is a primary phase that carries granular ...
Chemical investigation of miscanthus × giganteus Greef et Deu. Cultivated in Serbia: A potential renewable source of energy / Hemijska ispitivanja miskantusa gajenog u Srbiji - potencijalni obnovljiv izvor energije
(Belgrade, Serbia : Engineering Society for Corrosion, 2016)
According to scientific community and professional specialists, urging necessity to increase capacity of sources of energy can be partially achieved by using biomass as a raw material. This approach is justified by both ...