Pretraživanje
Prikaz rezultata 1-10 od 40
Sage Extracts as Inhibitors of Steel Corrosion in 4% HCl
(Esg, Belgrade, 2016)
In this paper the research of corrosion protection of steel by processing corrosion environment using various concentrations of sage extracts (Salvia officinalis) (0.5 g/dm(3), 1 g/dm(3) and 1.5 g/dm(3)) in a 4% solution ...
Stecište nauke i prakse u oblastima korozije, zaštite materijala i životne sredine: XIX YuCorr Međunarodna konferencija - knjiga radova / Meeting Point of the Science and Practice in the Fields of Corrosion, Materials and Environmental Protection: XIX YuCorr International Conference - proceedings; [September 12-15, 2017, Tara Mountain, Serbia]
(Beograd: Udruženje inženjera Srbije za koroziju i zaštitu materijala (UISKOZAM)Belgrade: Serbian Society of Corrosion and Materials Protection (UISKOZAM), 2017)
Corrosion stability of cerium-doped cataphoretic epoxy coatings on AA6060 alloy
(Wiley-V C H Verlag Gmbh, Weinheim, 2016)
In this study, corrosion protection efficiency of undoped epoxy and epoxy coating doped with cerium on aluminum alloy AA6060 is evaluated over prolonged exposure to 3wt% NaCl solution by electrochemical impedance spectroscopy ...
Mechanisms of hydrogen evolution on chromium / Mehanizmi izdvajanja vodonika na hromu
(Institut za rudarstvo i metalurgiju Bor, 2015)
In this work, the mechanisms of hydrogen evolution on the metal chromium in a solution of 0.1 M Na2SO4 + H2SO4, pH 1 to pH 7 were analysed. In the pH LT 3 range, hydrogen is evolved according to three different mechanisms, ...
Chemical corrosion of metals and alloys / Hemijska korozija metala i legura
(Belgrade, Serbia : Engineering Society for Corrosion, 2016)
In this paper, phenomena of chemical corrosion of metals and alloys in electrolyte solutions are analyzed. It is shown that iron, chromium and other metals and alloys dissolve much faster than is the corrosion rate determined ...
Corrosion properties of an aluminium alloy 7000 series after a new two step precipitation hardening / Otpornost prema koroziji aluminijumske legure serije 7000 posle novog dvostepenog termičkog taloženja
(Belgrade, Serbia : Engineering Society for Corrosion, 2014)
Corrosion properties of an aluminium alloy 7000 series were investigated by different electrochemical methods. The alloy was subjected to the one-step and to a new two-step precipitation hardening. Polarization measurements ...
Preliminary investigation on the use of the Q-switched Nd:YAG laser to clean corrosion products on museum embroidered textiles with metallic yarns
(Journal of Cultural Heritage, 2017)
The classic methods of cleaning oldfashioned textile museum objects with metallic threads often do not yield the expected results. The use of laser in the conservation of these objects plays an important role as very ...
Modified tannins for alkyd based anticorrosive coatings / Primena modifikovanih tanina u antikorozionim alkidnim premazima
(Belgrade : Engineering Society for Corrosion, 2019)
The study of the synthesis of anticorrosive inhibitors, based on chemically modified tannins, and
their use in alkyd based coatings to improve anticorrosive properties is presented in this work.
Two methods of tannin ...
Testing the protective ability of corrosion inhibitors in dilute chloride solutions / Ispitivanje zaštitne sposobnosti inhibitora korozije u razblaženim rastvorima hlorida
(Belgrade, Serbia : Engineering Society for Corrosion, 2017)
After sterilization of meat cans in a factory of meat and meat products in Serbia, occurence of corrosion on the can lids was observed. Sterilization of cans is usually performed in the presence of corrosion inhibitors. ...
Preliminary investigation on the use of the Q-switched Nd:YAG laser to clean corrosion products on museum embroidered textiles with metallic yarns
(Journal of Cultural Heritage, 2017)
The classic methods of cleaning oldfashioned textile museum objects with metallic threads often do not yield the expected results. The use of laser in the conservation of these objects plays an important role as very ...