Претраживање
Приказ резултата 1-6 од 6
Corrosion stability of cerium-doped cataphoretic epoxy coatings on AA6060 alloy
(Wiley-V C H Verlag Gmbh, Weinheim, 2016)
In this study, corrosion protection efficiency of undoped epoxy and epoxy coating doped with cerium on aluminum alloy AA6060 is evaluated over prolonged exposure to 3wt% NaCl solution by electrochemical impedance spectroscopy ...
Preliminary investigation on the use of the Q-switched Nd:YAG laser to clean corrosion products on museum embroidered textiles with metallic yarns
(Journal of Cultural Heritage, 2017)
The classic methods of cleaning oldfashioned textile museum objects with metallic threads often do not yield the expected results. The use of laser in the conservation of these objects plays an important role as very ...
Moisture Mapping of Aeronautical Museum Depot and Galleries by IR Thermography
(Belgrade, Serbia: Military Technical Institute, Belgrade, 2012)
The paper presents the results of moisture detection in the depot and galleries of the Aeronautical Museum in Belgrade. The moisture and changeable temperature conditions are the main causes for corrosion in historical ...
Corrosion Processes, Nature and Composition of Corrosion Products on Iron Artefacts of Weaponry / Korozioni procesi, priroda i sastav produkata korozije na naoružanje od legura gvožđa
(Belgrade: Military Technical Institute, 2011)
The paper outlines the corrosion processes occurring in different types of iron artefacts of weaponry and military equipment while bured after excavation. Special attention was given to the description of the nature and ...
Ecological cleaning of corrosion products on mettalic embroidery textile artefacts by Nd:YAG laser
(Scientific professional society for environmental protection of Serbia-ECOLOGICA, 2015)
A great number of textile objects with metallic embroidery are kept in Ethnographic Museums all over the world. Corrosion is a process that occurs under the external chemical, mechanical and biological influences. The ...
Influence of annealing temperature on sensitisation behaviour and corrosion properties of an Al-6.8wt% Mg alloy
(Wiley, 2016)
Influence of annealing temperature on beta-(Al3Mg2) phase precipitation and corrosion properties of sensitised Al-6.8wt% Mg alloy is investigated. Sensitisation of specimens annealed at 320 degrees C results in IGC and SCC ...