Претраживање
Приказ резултата 1-9 од 9
Application of polymer materials for production of evaporative pattern and development of new casting process
(Bor, Srbija : Tehnički fakultet Bor, Institut za rudarstvo i metalurgiju, 2012)
In this paper, results of the investigation of the polymer materials for evaporate patterns and their application in the new casting method (EPC process) are presented. The basic characteristic of EPC process is that ...
Developement of Modern Technologies of Copper Alloys Casting
(Association of Metallurgical Engineers of Serbia (AMES)University of Belgrade, Faculty of Technology and Metallurgy Belgrade (TMF), 2013)
In this paper, results of investigation of casting technology of complex thin-wall copper alloy castings with accent on Lost Foam casting procedure are given. Phases of casting procedure were investigated, along with ...
Anisotropy of refractory concrete subjected to the thermal shock by using the surface analysis
(Bor : University of Belgrade - Technical Faculty in Bor, 2013)
Monitoring and analysis of the material anisotropy during the thermal shock of the refractory concrete was studied. The material was alumina based low cement castable pre-treated at 1300°C for 3 hours. Water quench test ...
Removal of copper, cadmium, and zinc from the mine wastewater in RTB Bor by low cost adsorbent fly ash
(Bor : University of Belgrade - Technical Faculty in Bor, 2013)
Using fly ash, lignite and mixture of lignite and fly ash for the removal of Cu, Cd and Zn from the acid mine wastewater was studied. The batch and dynamic experiments were conducted. Analysis of mine wastewater proved ...
Adsorption properties of TENT fly ash in removal of copper from wastewater
(Bor : University of Belgrade - Technical Faculty in Bor, 2013)
The objective of this study was to monitor the behavior of fly ash originated from the power plant Nikola Tesla as a low cost absorbent for removal of copper ions from synthetic aqueous solutions. Fly ash, a potentional ...
Kinetics of copper adsorption from wastewater by lignite
(Sofia, Bulgaria : Publishing House “St. Ivan Rilski”, 2013)
Kolubara lignite was used as a natural and low cost adsorption material for removal of copper (Cu2+) from the aqueous solutions. As a method, batch adsorption procedure was applied. Results show that domestic lignite is ...
Adsorption isotherms of removing copper from aqueous solutions by low cost adsorbent-lignite
(Sofia, Bulgaria : Publishing House “St. Ivan Rilski”, 2013)
Serbian lignite from ’’Kolubara’’ deposit was used as a low cost adsorbent for removal of copper ions (Cu2+) from aqueous solutions. Lignite was subjected to the elementary and technical analysis as well as BET and FTIR ...
Characterization of natural raw materials in the processing of iron ore from Omarska mine
(Beograd : Rudarski institut Beograd / Belgrade: Mining Institute BelgradeBalkanska akademija rudarskih naukaAkademija inženjerskih nauka Srbije, 2017)
In present paper there were studied characteristics of the primary natural raw material samples from Omarska mine (Bosnia and Herzegovina). These materials are labeled as: “limonite ore”, “quartz” and “clay”, and they are ...
Concentration method for the mining wastewater-valorization of the copper
(The Regional Environmental Center for Central and Eastern Europe, 2013)
During the mining process of copper exploitation, a large amount of wastewater is generated. Not only do the copper ions contaminate the water but also represent a great loss for the copper production industry. Negative ...