Претраживање
Приказ резултата 51-60 од 65
Preparation and mechanical characterization of copper thin films with additives on alloy substrates
(Belgrade : Institute of Chemistry, Technology and Metallurgy, 2017)
Thin copper films have various application in the electronic industry for the fabrication of
contacts in integrated circuits. Copper electroplating has been widely employed for
fabricating the wires of printed circuit ...
Impact of deposition conditions on the electrocatalytic performances of Sn-Pd catalysts in ethanol oxidation reaction
(Serbian society of corrosion and materials protection (UISKOZAM) / Udruženje inženjera Srbije za koroziju i zaštitu materijala, 2023)
We are reporting the electrochemical behavior of bimetallic Sn-Pd catalysts in ethanol oxidation reaction (EOR). Sn-Pd catalysts were prepared by two step electrodeposition technique whereby by regulating deposition ...
Mechanical Properties of Electrolytically Produced Copper Coatings Reinforced with Pigment Particles
(MDPI, 2023)
Copper from sulfate baths without and with added inorganic pigment particles based on strontium aluminate doped with europium and dysprosium (SrAl2O4: Eu2+, Dy3+) was electrodeposited on a brass cathode by a galvanostatic ...
Influence of parameters of the pulsating current (PC) regime on morphological, structural and hardness characteristics of copper coatings electrodeposited on Si(111)
(Niš, Serbia : RAD Centre, 2021)
Electrodeposition of Cu was performed on Si(111) by the pulsating current (PC) regime in the
range of the average current densities (jav) between 15 and 70 mA cm-2
. The selected values of the
average current densities ...
The electrochemical deposition and corrosion stability of Zn-Mn alloy coatings / Elektrohemijsko taloženje i koroziona stabilnost prevlaka Zn-Mn legura
(Belgrade, Serbia : Engineering Society for Corrosion, 2010)
The influence of the type of the deposition solution on the current efficiency during electrodeposition of Zn-Mn alloys was examined. The Zn-Mn alloys were deposited on steel from chloride, sulphate and pyrophosphate plating ...
Electrochemical study of Nd and Pr co-deposition onto Mo and W from molten oxyfluorides
(MDPI, 2021)
Electrodeposition processes of neodymium and praseodymium in molten NdF3 + PrF3 + LiF + 1 wt.%Pr6O11 + 1 wt.%Nd2O3 and NdF3 + PrF3 + LiF + 2 wt.%Pr6O11 + 2 wt.%Nd2O3 electrolytes at 1323 K were investigated. Cyclic ...
Morphology of aluminium electrodeposited on aluminium from AlCl3+urea solvate ionic liquid
(Society of Physical Chemists of Serbia, 2021)
The ionic liquid, made of urea and AlCl3, known as deep eutectic solvent (DESs) has already shown to be low‐cost electrolyte suitable for aluminum electrodeposition. By applying appropriate potentiostatic or galvanostatic ...
Microindentation hardness testing of different composite systems with thin electrodeposited nickel and copper films
(Belgrade : Military Technical Institute, 2012)
Thin Ni and Cu films with fine-grained structures have been electrodeposited from self-made sulphamate-based and sulphate-based electrolytes, respectively. DC electrodeposition of Ni films was performed on single crystal ...
A Novel Two-Step Electrochemical Deposition Method for Sn-Pd Electrocatalyst Synthesis for a Potential Application in Direct Ethanol Fuel Cells
(MDPI, 2023)
Sn-Pd electrocatalysts with a constant atomic ratio of 60 at.% Sn‒40 at.% Pd suitable for
potential application in direct ethanol fuel cells were synthesized using a novel two-step electrodeposition method. First, Sn was ...
Electrochemical deposition of titanium and aluminium from equimolar AlCl3+NaCl melt
(Romanian Chemical Society, 2019)
Electrodeposition of Al-Ti based materials is an attractive process offering
many advantages over more conventional processing methods. A number of articles on
aluminium-titanium intermetallics electrodeposited from ...