Претраживање
Приказ резултата 11-16 од 16
Valorization of fly ash from a thermal power plant for producing high-performance self-compacting concrete
(International Institute for the Science of Sintering, Beograd, 2020)
This study analyzes the feasibility of valorizing industrial by-product, fly ash from a
thermal power plant as a partial replacement of mineral filler-limestone for the production of
self-compacting concrete (SCC). Three ...
A possible connection between phosphate tungsten bronzes properties and briggs-rauscher oscillatory reaction response
(Belgrade : International Institute for the Science of Sintering (IISS), 2021)
The calcium phosphate tungsten bronze (Ca-PWB) has been synthesized and characterized (TGA, DSC, XRPD, FTIR, SEM). The influence of solid insoluble materials Ca-PWB, as well as lithium doped (Li-PWB) and cation free phosphate ...
Application of Ni(II)-alumina Composites for Electrocatalytic Reduction of 4-nitrophenol
(International Institute for the Science of Sintering, Belgrade, 2020)
Nickel-alumina composites with various content of nickel were synthetized by sol-gel method. The characterization of samples was performed by diffuse reflectance spectroscopy and electrochemical impedance spectroscopy using ...
Macroporous monoliths based оn natural mineral sources, clay аnd diatomite
(Belgrade : Association for ETRAN Society, 2020)
Macroporous silica ceramic was obtained using clay and diatomite. Boric acid as a low-cost additive in the amount of 1 wt% was used. These porous materials were obtained at low forming pressure (40-80 MPa) and lower sintering ...
The Influence of pH on Electrochemical Behavior of Nicotine- Clay based Electrodes
(Belgrade : International Institute for the Science of Sintering (IISS), 2021)
Montmorillonite based clay was acid activated. Nicotine was adsorbed on untreated
and acid activated clay from its aqueous solution at either pH=6 or pH=9.26 (unadjusted pH
solution). The XRD analysis revealed that the ...
Effect оf delamination оn physico-chemical properties оf kaolin
(International Institute for the Science of Sintering (IISS), 2021)
To provide the quality required for its use, raw kaolin must be subjected to certain processing procedures like delamination which is applied to the layered structure materials. The aim of this research is to determine the ...