Претраживање
Приказ резултата 1-10 од 10
Effect of the electrolysis regime on the structural characteristics of honeycomb-like electrodes
(Soc Chemists Technologists Madeconia, Skopje, 2013)
The effect of different current regimes of electrolysis on the micro- and nanostructural characteristics of open porous structures was examined by the analysis of honeycomb-like copper electrodes obtained by constant ...
The Effect of Periodically Changing Regimes on the Electrodeposition of Silver Powder
(Esg, Belgrade, 2011)
The effect of different deposition regimes (constant and reversing currents, constant and pulsating overpotential), on the powdered and dendritic silver electrodeposits morphology were investigated. The morphology of ...
Catalytic activity of sulfuric acid on the morphology of electrochemically obtained copper powder / Katalitičko delovanje sumporne kiseline na morfologiju elektrohemijski dobijenog bakarnog praha
(Belgrade, Serbia : Engineering Society for Corrosion, 2015)
The subject of the research is influence of sulfuric acid on morphology of electrochemically obtained copper powder during galvanostatic electrolysis mode. In this paper electrodeposition of copper powder from sulphate ...
Influence of Parameters and Regimes of the Electrodeposition on Hardness of Copper Coatings
(MDPI, 2023)
Correlation among morphological, structural and hardness characteristics of electrodeposited
copper coatings is presented in this review paper. Cu coatings were produced applying constant galvanostatic (DC) and pulsating ...
Morphology, Structure and Mechanical Properties of Copper Coatings Electrodeposited by Pulsating Current (PC) Regime on Si(111)
(MDPI, 2020)
Copper electrodeposition on (111)-oriented Si substrate was performed by the pulsating current (PC) regime at various average current densities in the range of 15–70 mA·cm−2, obtained by varying either the frequency (30, ...
Morphology and Structure of Electrolytically Synthesized Tin Dendritic Nanostructures
(MDPI, 2022)
The formation of tin dendritic nanostructures by electrolysis from the alkaline electrolyte
has been investigated. Morphology and structure of Sn dendrites produced applying both potentiostatic and galvanostatic regimes ...
The electrochemical deposition and corrosion stability of Zn-Mn alloy coatings / Elektrohemijsko taloženje i koroziona stabilnost prevlaka Zn-Mn legura
(Belgrade, Serbia : Engineering Society for Corrosion, 2010)
The influence of the type of the deposition solution on the current efficiency during electrodeposition of Zn-Mn alloys was examined. The Zn-Mn alloys were deposited on steel from chloride, sulphate and pyrophosphate plating ...
Uticaj gustine struje na morfologiju elektrohemijski dobijenog bakarnog praha / Influence current density on the morphology electrochemical obtained copper powder
(Podgorica, Crna Gora : Crnogorsko društvo za koroziju, zaštitu materijala i zaštitu životne sredine, 2014)
U radu je ispitivan uticaj gustine struje na morfologiju elektrohemijski dobijenog bakarnog praha.
Vršeno elektrohemijsko taloženje bakarnog praha iz sulfatnih elektrolita. Korišćeni su elektroliti sa tri koncentracije ...
Electrodeposition of cobalt powders with novel three-dimensional structure
(Metalurgija, 2011)
Novel three-dimensional cobalt powder structures were successfully prepared by electrodeposition. Electrodeposited cobalt powder was characterized by scanning electron microscopy (SEM) and light microscopy. It was possible ...
Mechanical Properties of Electrolytically Produced Copper Coatings Reinforced with Pigment Particles
(MDPI, 2023)
Copper from sulfate baths without and with added inorganic pigment particles based on strontium aluminate doped with europium and dysprosium (SrAl2O4: Eu2+, Dy3+) was electrodeposited on a brass cathode by a galvanostatic ...