Претраживање
Приказ резултата 1-6 од 6
The effect of current density, deoisition time and electrolytic pH value on roughness of copper coatings / Uticaj gustine struje, vremena taloženja i pH – vrednosti elektrolita na hrapavost prevlaka bakra
(Belgrade, Serbia : Engineering Society for Corrosion, 2006)
The copper coatings were electrodeposited directly onto aluminium from the bath: (CuSO4 (55 g/dm3) + CH2 NH2 - CH2OH (100g/ dm3) + (NH4)2SO4 (30 g/dm3) + Na2SO4(10H2O (75g/dm3) + Na2CO3 (3g/dm3), room temperature, j = 0.3 ...
The roughness of silver coatings electrodeposited onto aluminium / Hrapavost prevlaka srebra taloženih galvanostatskim putem na aluminijum
(Belgrade, Serbia : Engineering Society for Corrosion, 2006)
In this paper the surface roughness of silver coatings electrodeposited as final coatings onto aluminum was analyzed. The copper coating was electrodeposited as a basic coating directly onto aluminum. Afterward, nickel and ...
The effect of preparation of aluminum surface on surface reflection / Uticaj pripreme površine aluminijuma na površinsku refleksiju
(Belgrade, Serbia : Engineering Society for Corrosion, 2004)
Aluminum samples were electrochemically polished in one of three solutions for electrochemical polishing. On those samples the surface reflection was measured. The effect of the anode treatment as the interface between the ...
Electroplating of silver onto aluminum and its alloys / Elektrohemijsko taloženje prevlaka srebra na aluminijum i njegove legure
(Belgrade, Serbia : Engineering Society for Corrosion, 2005)
In this paper the structural characteristics of silver coatings electrodeposited as final coatings onto aluminum were shown. The copper coating was electrodeposited as a basic coating directly onto aluminum. Afterward, ...
The effect of preparation of aluminum surface on surface roughness / Uticaj pripreme površine aluminijuma na površinsku hrapavost
(Belgrade, Serbia : Engineering Society for Corrosion, 2004)
Aluminum samples were electrochemically polished in one of three solutions for electrochemical polishing. On those samples the surface roughness was measured. The effect of the anode treatment on surface roughness was also ...
The effect of deposition time on the structure of the top coating of nickel electrodeposited onto aluminum / Uticaj vremena taloženja na strukturu završne prevlake nikla na aluminijumu
(Belgrade, Serbia : Engineering Society for Corrosion, 2004)
The microstructure of the chemical coating of zinc on aluminum, as well as electrodeposited nickel coating on chemically deposited zinc were investigated with change of one parameter only-deposition time. Based on the ...