Search
Now showing items 1-5 of 5
New method of Ni/WC and Cu/WC composite coatings formation / Novi način formiranja kompozitnih prevlaka
(Belgrade, Serbia : Engineering Society for Corrosion, 2004)
Ni/WC and Cu/WC composite coatings were obtained in two steps. The first step consists of the inert WC particles deposition from the aqueous solution onto steel surface by means of a micro-pipette and covering by the dilute ...
Activated titanium anodes in cathodic protection: A comparison of the characteristics of anodes prepared by sol-gel procedure and thermal decomposition / Aktivirane titanske anode u katodnoj zaštiti - poređenje karakteristika anoda dobijenih sol-gel postupkom i termičkom razgradnjom
(Belgrade, Serbia : Engineering Society for Corrosion, 2004)
Polarization characteristics of titanium anodes, coated by active RuO2-TiO2 binary oxide using sol-gel preparation procedure and chloride thermal decomposition, in oxygen evolution reaction during anode electrolytic ...
The effect of preparation of aluminum surface on surface roughness / Uticaj pripreme površine aluminijuma na površinsku hrapavost
(Belgrade, Serbia : Engineering Society for Corrosion, 2004)
Aluminum samples were electrochemically polished in one of three solutions for electrochemical polishing. On those samples the surface roughness was measured. The effect of the anode treatment on surface roughness was also ...
The effect of preparation of aluminum surface on surface reflection / Uticaj pripreme površine aluminijuma na površinsku refleksiju
(Belgrade, Serbia : Engineering Society for Corrosion, 2004)
Aluminum samples were electrochemically polished in one of three solutions for electrochemical polishing. On those samples the surface reflection was measured. The effect of the anode treatment as the interface between the ...
The effect of deposition time on the structure of the top coating of nickel electrodeposited onto aluminum / Uticaj vremena taloženja na strukturu završne prevlake nikla na aluminijumu
(Belgrade, Serbia : Engineering Society for Corrosion, 2004)
The microstructure of the chemical coating of zinc on aluminum, as well as electrodeposited nickel coating on chemically deposited zinc were investigated with change of one parameter only-deposition time. Based on the ...