Претраживање
Приказ резултата 1-6 од 6
Ternary Bi-Cu-Ni alloys – thermodynamics, characterization, mechanical and electrical properties
(Serbia : Association of Metallurgical Engineers of Serbia, 2017)
The Bi–Cu–Ni ternary system belongs to the group of potential Cu-Ni-based advanced lead-free solder materials for high temperature application. The paper shows results of the thermodynamic calculations using general solution ...
Effect of chemical composition on microstructure, hardness and electrical conductivity profiles of the Bi-Cu-Ga alloys at 100 °C
(Serbia : Association of Metallurgical Engineers of Serbia, 2016)
Theoretical calculation and experimental investigation of the isothermal section of a ternary Bi-Cu-Ga system at 100 oC are presented in this paper. Thermodynamic binary-based calculation of the isothermal section was ...
On the properties of hot forged Ti-6Al-4V alloy aimed for surgical implants
(Belgrade : Association of Metallurgical Engineers of Serbia, 2019)
The investigation here is aimed to examine the structural and mechanical changes that might have occurred during the hot forging process, a process to obtain a surgical hip implant, and the subsequent heat treatment. ...
Testing of intergranular and pitting corrosion in sensitized welded joints of austenitic stainless steel
(Serbia : Association of Metallurgical Engineers of Serbia, 2017)
Pitting corrosion resistance and intergranular corrosion of the austenitic stainless steel X5Cr Ni18-10 were tested on the base metal, heat affected zone and weld metal. Testing of pitting corrosion was performed by the ...
Mechanical and electrical properties of ternary Ag-Bi-Ga system at 250 °C
(Serbia : Association of Metallurgical Engineers of Serbia, 2017)
This paper presents a comparative review of the experimental and thermodynamic assessment of a ternary Ag-Bi-Ga system. An isothermal section at 250 °C was calculated using optimized thermodynamic data for the constitutive ...
Synthesis of NiFe2O4 nanofibers by joint sol-gel and electrospinning technique
(Belgrade : Association of Metallurgical Engineers of Serbia, 2018)
In this study, electrospinning combined with sol-gel technique is applied in order to produce magnetic nickel ferrite (Ni-ferrite) nanofibers. The prepared Ni-ferrite gel was mixed with poly(vinylpyrrolidone) (PVP) solution ...