Претраживање
Приказ резултата 21-30 од 40
Application of pulsating overpotential regime on the formation of copper deposits in the range of hydrogen co-deposition
(Springer, New York, 2010)
Electrodeposition of copper by pulsating overpotential (PO) regime in the range of hydrogen co-deposition was examined by scanning electron microscopy. It was found that the increase of the pause-to-pulse ratio produced a ...
The potentiostatic current transients and the role of local diffusion fields in formation of the 2D lead dendrites from the concentrated electrolyte
(Elsevier, 2015)
Electrodeposition of lead from the concentrated nitrate electrolyte in the potentiostatic regime of electrolysis has been investigated by the analysis of the potentiostatic current transients and scanning electron microscope ...
TiO2/SnO2 photocatalyst formed by plasma electrolytic oxidation
(Elsevier, 2017)
TiO2/SnO2 coatings are formed by plasma electrolytic oxidation of titanium substrate in supporting electrolyte (10 g/L Na3PO4 center dot 12H(2)O) with addition of various concentrations of SnO2 particles. Photocatalytic ...
Application of the general theory of disperse deposits formation in an investigation of mechanism of zinc electrodeposition from the alkaline electrolytes
(Elsevier, 2017)
In this study, mechanism of electrodeposition of zinc from the alkaline electrolytes has been investigated using the general theory of disperse deposits formation. The exchange current densities in the range 18.4-88 mA ...
Aluminium electrodeposition under novel conditions from AlCl3–urea deep eutectic solvent at room temperature
(Elsevier, 2020)
The electrodeposition of aluminium on glassy carbon and aluminium substrates from AlCl3–urea deep eutectic solvent (DES) system at near room temperatures was investigated, without additional purification of the chemicals ...
Morphology of Electrochemically and Chemically Deposited Metals
(Springer Science and Business Media LLC, 2016)
This book describes the newest achievements in the area of electrochemically and chemically deposited metals and alloys. In particular, the book is devoted to the surface morphology of deposited metals and alloys. It ...
Structural characteristics of bright copper surfaces
(Journal of Electroanalytical Chemistry, 2001)
In this work, the structures of copper surfaces polished mechanically and polished both mechanically and electrochemically, as well as copper coatings obtained in the presence of basic and top brightening addition agents ...
Corrosion protection of aluminium by a cataphoretic epoxy coating
(Elsevier, 1999)
The corrosion behavior and thermal stability of epoxy coating electrodeposited on aluminium have been investigated during exposure to
3% NaCl. Electrochemical impedance spectroscopy (EIS), gravimetric liquid sorption ...
Electrodeposited AgPd alloy coatings as efficient catalysts for the ethanol oxidation reaction
(Oxford : Pergamon-Elsevier Science Ltd, 2018)
The Pd and three AgPd alloy layers (AgPd1, AgPd2 and AgPd3) were electrodeposited onto Au disc electrodes from the solution containing high concentration of chloride ions (>12 M). All coatings were investigated by scanning ...
Effect of the anodic current density on copper electrodeposition in the hydrogen co-deposition range by the reversing current (RC) regime
(Elsevier, 2011)
In this study, the effect of the anodic current density in the regime of reversing current (RC) on the quantity of evolved hydrogen and morphology of copper deposits was considered. The quantity of evolved hydrogen was ...