Pretraživanje
Prikaz rezultata 11-20 od 40
Some aspects of current density distribution in electrolytic cells I: Dendritic growth of cadmium at the cathode edge in galvanostatic electrodeposition
(Elsevier, 1983)
The equivalent electrical resistance of a cell with plane parallel electrodes is described by a simple mathematical model. The limits of this model were determined experimentally. The relation between the overpotential at ...
Fundamental aspects of plating technology II: Morphological aspects of metal electrodeposition from complex salt solutions
(Elsevier, 1983)
It is shown that the improved quality of electrodeposits obtained from ammonium complex salt solutions compared with deposits obtained from simple salt solutions is due to the decrease in the exchange current density value ...
Fundamental aspects of pulsating current metal electrodeposition IX: The prevention of spongy deposit formation on inert substrates
(Elsevier, 1984)
It is shown that spongy deposits are obtained under d.c. conditions and that compact deposits are obtained in pulsating current (PC) deposition with high pause-to-pulse ratios at the same average current density and ...
Electrodeposition of Ni, Co and Ni–Co alloy powders
(Elsevier, 2006)
In this paper the polarization characteristics of the processes of Ni and Co powders and Ni-Co alloy powders electrodeposition from ammonium sulfate containing supporting electrolyte are investigated as a function of Ni ...
Electrochemical deposition and characterization of Zn /Co alloys and corrosion protection by electrodeposited epoxy coating on Zn /Co alloy
(Elsevier, 2002)
Zn-Co alloys electrochemically deposited on steel under various deposition conditions were investigated. The influence of deposition current density, temperature and composition of deposition solution on the phase structure ...
A Novel Route for Electrolytic Production of Very Branchy Copper Dendrites under Extreme Conditions
(IOP Publishing Limited, 2021)
Copper electrodeposition in a form of powder was examined using the pulsating overpotential (PO) regime from the sulfate electrolyte without or with an addition of various concentrations of chloride ions. Morphological and ...
Fundamental aspects of pulsating current metal electrodeposition VIII: The effect of pause-to-pulse ratio on microthrowing power of metal deposition
(Elsevier, 1984)
The effect of a pulsating current on the microthrowing power of metal deposits in the early stage of deposition was investigated by scanning electron microscopy. It is shown that at the same average current density the ...
Electrodeposited AgPd alloy coatings as efficient catalysts for the ethanol oxidation reaction
(Oxford : Pergamon-Elsevier Science Ltd, 2018)
The Pd and three AgPd alloy layers (AgPd1, AgPd2 and AgPd3) were electrodeposited onto Au disc electrodes from the solution containing high concentration of chloride ions (>12 M). All coatings were investigated by scanning ...
The potentiostatic current transients and the role of local diffusion fields in formation of the 2D lead dendrites from the concentrated electrolyte
(Elsevier, 2015)
Electrodeposition of lead from the concentrated nitrate electrolyte in the potentiostatic regime of electrolysis has been investigated by the analysis of the potentiostatic current transients and scanning electron microscope ...
Electrodeposition of silver powder by pulsating and reversing currents
(Springer Nature Switzerland AG 2020, 1991)
The effect of the shape of the current wave and frequency in silver deposition by pulsating and reversing currents on the morphology of powder particles were investigated. The possibility of obtaining particles with different ...