Претраживање
Приказ резултата 21-30 од 41
Effect of the electrolysis regime on the structural characteristics of honeycomb-like electrodes
(Soc Chemists Technologists Madeconia, Skopje, 2013)
The effect of different current regimes of electrolysis on the micro- and nanostructural characteristics of open porous structures was examined by the analysis of honeycomb-like copper electrodes obtained by constant ...
Electrodeposition of Aluminium-Vanadium Alloys from Chloroaluminate Based Molten Salt Containing Vanadium Ions
(MDPI, 2021)
The Al-V alloys were synthetized by potentiostatic electrodeposition onto a glassy carbon electrode from equimolar AlCl3 + NaCl bath containing vanadium ions at 200 °C. The alloy deposits were characterized by X-ray ...
Relationship between the kinetic parameters and morphology of electrochemically deposited lead
(Serbian Chemical Society, 2016)
The processes of lead electrodeposition from electrolytes of various concentrations of sodium nitrate as the supporting electrolyte have been examined by chronoamperometry and by the scanning electron microscopic (SEM) ...
Determination of the absolute hardness of electrolytically produced copper coatings by application of the Chicot-Lesage composite hardness model / Одређивање апсолутне тврдоће електролитички добијених превлака бакра применом Chicot-Lesage композитног модела тврдоће
(Belgrade : Serbian Chemical Society, 2022)
In this study, a novel procedure, based on application of the Chicot–Lesage (C–L) composite hardness model, was proposed for the determination of an absolute hardness of electrolytically produced copper coatings. The Cu ...
Formation of the honeycomb-like electrodes by the regime of pulsating overpotential in the second range
(International Association of Physical Chemists (IAPC), 2012)
In this study the honeycomb-like copper structures electrodeposited by the regime of pulsating overpotential in the second range were analyzed by the technique of scanning electron microscopy. The overpotential amplitude ...
Formation of Disperse Silver Deposits by the Electrodeposition Processes at High Overpotentials
(Esg, Belgrade, 2012)
In this study, electrodeposition of silver from nitrate solution at the high overpotentials was analyzed. Morphologies of silver deposits obtained at the different overpotentials and with the different electrodeposition ...
The effects of a magnetic field on the morphologies of nickel and copper deposits: The concept of 'effective overpotential' / Uticaj primenjenih magnetnih polja na morfologije taloga nikla i bakra - koncept 'efektivne prenapetosti'
(Serbian Chemical Society, 2007)
The morphologies of nickel and copper deposits obtained without applied magnetic fields, and with both parallel and perpendicular applied magnetic fields were examined by the scanning electron microscopy (SEM) technique. ...
Influence of Parameters and Regimes of the Electrodeposition on Hardness of Copper Coatings
(MDPI, 2023)
Correlation among morphological, structural and hardness characteristics of electrodeposited
copper coatings is presented in this review paper. Cu coatings were produced applying constant galvanostatic (DC) and pulsating ...
The study of Zn-Co alloy coatings electrochemically deposited by pulse current / Ispitivanje prevlaka Zn-Co legura dobijenih pulsirajućom strujom
(Association of Chemical Engineers of Serbia, 2012)
The electrochemical deposition by pulse current of Zn-Co alloy coatings on steel was examined, with the aim to find out whether pulse plating could produce alloys that could offer a better corrosion protection. The influence ...
Ternary Zn-Ni-Co alloy: anomalous codeposition and corrosion stability
(Serbian Chemical Society, 2015)
Electrochemically deposited Zn-Ni-Co alloys under various deposition conditions were investigated using atomic absorption spectroscopy for the determination of the chemical composition, atomic force microscopy for surface ...