Претраживање
Приказ резултата 21-30 од 41
Electrocrystallization of silver dendrites / Elektrokristalizacija dendrita srebra
(Belgrade, Serbia : Engineering Society for Corrosion, 2014)
Morphology of electrodeposited silver dendrites was investigated by scanning electron microscope (SEM). On the basis of morphological analysis, the structures and mechanism of growth were proposed. Silver dendrite is twin ...
Effect of the orientation of the initially formed grains on the final morphology of electrodeposited lead
(Serbian Chemical Society, 2014)
The processes of Pb electrodeposition under diffusion control were examined by scanning electron microscopy (SEM) of the formed crystals. The orientation of grains of hexagonal shape formed in the initial stage of ...
Morphology and Structure of Electrolytically Synthesized Tin Dendritic Nanostructures
(MDPI, 2022)
The formation of tin dendritic nanostructures by electrolysis from the alkaline electrolyte
has been investigated. Morphology and structure of Sn dendrites produced applying both potentiostatic and galvanostatic regimes ...
Estimation of the exchange current density and comparative analysis of morphology of electrochemically produced lead and zinc deposits
(Serbian Chemical Society, 2017)
The processes of lead and zinc electrodeposition from the very dilute electrolytes were compared by the analysis of polarization characteristics and by the scanning electron microscopic (SEM) analysis of the morphology of ...
Ternary Zn-Ni-Co alloy: anomalous codeposition and corrosion stability
(Serbian Chemical Society, 2015)
Electrochemically deposited Zn-Ni-Co alloys under various deposition conditions were investigated using atomic absorption spectroscopy for the determination of the chemical composition, atomic force microscopy for surface ...
Correlation between morphology and magnetic properties of electrochemically produced cobalt powder particles
(Serbian Chemical Society, 2015)
Cobalt 3D powder particles were successfully prepared by galvanostatic electrodeposition. The electrodeposited cobalt powders were characterized by X-ray diffraction (XRD) analysis, scanning electron microscopy (SEM), ...
Microstructure and corrosion behaviour of Zn-Co alloys deposited from three different plating baths / Mikrostruktura i koroziono ponašanje Zn-Co legura taloženih iz sulfatnog i hloridnih rastvora
(Serbian Chemical Society, 2011)
The effects of plating baths of different composition on the micro- structure and corrosion stability of Zn-Co alloy coatings were studied. Zn-Co alloys with the same Co content were deposited from chloride plating baths ...
Cross-section analysis of the morphology of electrodeposited copper obtained in the hydrogen co-deposition range / Morfologija poprečnog preseka prevlaka bakra dobijenih elektrohemijskim taloženjem u oblasti ko-depozicije vodonika
(Serbian Chemical Society, 2009)
Cross-section analysis of copper deposits electrodeposited in the hydrogen co-deposition range at a constant overpotential and in a pulsating overpotential (PO) regime was performed. It was shown that a complete structural ...
The study of Zn-Co alloy coatings electrochemically deposited by pulse current / Ispitivanje prevlaka Zn-Co legura dobijenih pulsirajućom strujom
(Association of Chemical Engineers of Serbia, 2012)
The electrochemical deposition by pulse current of Zn-Co alloy coatings on steel was examined, with the aim to find out whether pulse plating could produce alloys that could offer a better corrosion protection. The influence ...
Al-Pd alloy formation by aluminium underpotential deposition onto palladium from chloroaluminate melt
(Belgrade : ESG, 2021)
The possibility of electrochemical underpotential deposition of aluminium onto palladium from equimolar AlCl3+NaCl melts at temperatures between 200 ° and 300 °C was investigated. Electrochemical techniques used were cyclic ...