Претраживање
Приказ резултата 71-79 од 79
Direct electroplating of copper coatings onto aluminum / Neposredno elektrohemijsko taloženje prevlaka bakra na aluminijum
(Belgrade, Serbia : Engineering Society for Corrosion, 2005)
The deposition of copper coatings has been done by direct electrochemical deposition from the solution: CuSO4 (55 g/dm3) + CH2 NH2 - CH2OH (100 g/dm3) + (NH4)2SO4 (30 g/dm3) + Na2SO4*10H2O (75 g/dm3) + Na2CO3 (3 g/dm3), ...
The effect of preparation of aluminum surface on surface reflection / Uticaj pripreme površine aluminijuma na površinsku refleksiju
(Belgrade, Serbia : Engineering Society for Corrosion, 2004)
Aluminum samples were electrochemically polished in one of three solutions for electrochemical polishing. On those samples the surface reflection was measured. The effect of the anode treatment as the interface between the ...
Electroplating of silver onto aluminum and its alloys / Elektrohemijsko taloženje prevlaka srebra na aluminijum i njegove legure
(Belgrade, Serbia : Engineering Society for Corrosion, 2005)
In this paper the structural characteristics of silver coatings electrodeposited as final coatings onto aluminum were shown. The copper coating was electrodeposited as a basic coating directly onto aluminum. Afterward, ...
The effect of deposition time on the structure of the top coating of nickel electrodeposited onto aluminum / Uticaj vremena taloženja na strukturu završne prevlake nikla na aluminijumu
(Belgrade, Serbia : Engineering Society for Corrosion, 2004)
The microstructure of the chemical coating of zinc on aluminum, as well as electrodeposited nickel coating on chemically deposited zinc were investigated with change of one parameter only-deposition time. Based on the ...
The effect of preparation of aluminum surface on the structure of final coating of nickel / Uticaj pripreme površine aluminijuma na strukturu završne prevlake nikla
(Belgrade, Serbia : Engineering Society for Corrosion, 2003)
In this work structure characteristics of the final coating of nickel were studied. Nickel was deposited onto chemically prepared aluminum, chemically and electrochemically. Structural characteristics of metallic coatings ...
Properties of Ni-W alloys electrochemically deposited by direct and pulse current / Karakteristike legura Ni-W elektrohemijski taloženih konstantnom i pulsirajućom strujom
(Belgrade, Serbia : Engineering Society for Corrosion, 2005)
The Ni-W alloys were electrochemically deposited from a ammonia-citrate electrolyte on rotation disc electrode with a replaceable steel disc, by direct and pulsed current. The aim of the paper is investigations of parameters ...
Morphology of Fe-Ni alloy powders electrodeposited from citrate-sulfate containing solutions / Morfologija prahova Fe-Ni legura elektrohemijski istaloženih iz citratno-sulfatnih rastvora
(Belgrade, Serbia : Engineering Society for Corrosion, 2011)
The electrochemical deposition of the Fe-Ni alloy powders from citrate-sulfate containing electrolytes of different Ni/Fe ions concentration ratios at pH 4.5 was examined by the polarization measurements. All polarization ...
Determination of the weld metal corrosion rate using electrochemical techniques / Određivanje brzine korozije metala šava u zavarenom spoju pomoću elektrohemijskih tehnika
(Belgrade, Serbia : Engineering Society for Corrosion, 2015)
To determine corrosion rate of the base metal and weld metal were applied electrochemical techniques: linear polarization resistance, linear sweep voltammetry and electrochemical impedance spectroscopy. The samples were ...
Properties of cotton yarns after oxidation of potassium permanganate in an acidic environment / Svojstva pamučne pređe posle oksidacije kalijum-permanganatom u kiseloj sredini
(Belgrade, Serbia : Engineering Society for Corrosion, 2017)
The impact of nonselective cellulose oxidation (cotton fibre) by potassium permanganate in acidic environment, with or without additional treatment by sodium metabisulfite, on change of sorption (silver ions sorption), and ...