Претраживање
Приказ резултата 41-50 од 88
Temperature measurement performance of silicon piezoresistive MEMS pressure sensors for industrial applications
(Univerzitet u Nišu, 2015)
Temperature and pressure are the most common parameters to be measured and monitored not only in industrial processes but in many other fields from vehicles and healthcare to household appliances. Silicon microelectromechanical ...
Technological investigations of sulphide oxidation from flotation tailings in order to increase the degree of copper leaching
(Institut za rudarstvo i metalurgiju Bor, 2014)
The off-balance resources present the environmental problem and potential resource for copper extraction. This paper presents the results obtained using different reagents for the process of sulphide form oxidation of ...
Solvatochromism of N-aryl-phenylacetamides / Solvatohromizam N-aril-fenilacetamida
(Belgrade, Serbia : Engineering Society for Corrosion, 2016)
Amide derivates are biologically active compounds and they are widely used in all spheres of life. Therefore, it is very important to know their physical-chemical properties. In this work the influence of characteristics ...
Concepts of 3D terrain modeling and geomorphometric analysis in mining
(Institut za rudarstvo i metalurgiju Bor, 2016)
This paper describes the concepts of 3D terrain models and their application in mining. The methods of terrain (relief) by spots elevation and contour lines are commonly applied on geodetic plans and topographic maps. ...
Chemical corrosion of metals and alloys / Hemijska korozija metala i legura
(Belgrade, Serbia : Engineering Society for Corrosion, 2016)
In this paper, phenomena of chemical corrosion of metals and alloys in electrolyte solutions are analyzed. It is shown that iron, chromium and other metals and alloys dissolve much faster than is the corrosion rate determined ...
Determination of susceptibility to intergranular corrosion of stainless steels type X5CrNi18-10 in field
(Association of Metallurgical Engineers of Serbia, 2016)
In this paper, the DL EPR method (electrochemical potentiokinetic reactivation with double loop) was modified and used to study the susceptibility to intergranular corrosion and stress corrosion cracking of a stainless ...
The resistance to general corrosion of series of zinc-aluminum alloys modified with silicon and strontiumloys modified with silicon and strontium / Otpornost na opštu koroziju serije legura cink-aluminijum koje su modifikovane silicijumom i stroncijumom
(Belgrade : Engineering Society for Corrosion, 2019)
The resistance to corrosion of the series of zinc-aluminum casting alloys modified with silicon and
strontium was studied in a sodium chloride solution. It was shown that general corrosion was the
main form of corrosion ...
Modified tannins for alkyd based anticorrosive coatings / Primena modifikovanih tanina u antikorozionim alkidnim premazima
(Belgrade : Engineering Society for Corrosion, 2019)
The study of the synthesis of anticorrosive inhibitors, based on chemically modified tannins, and
their use in alkyd based coatings to improve anticorrosive properties is presented in this work.
Two methods of tannin ...
Testing the protective ability of corrosion inhibitors in dilute chloride solutions / Ispitivanje zaštitne sposobnosti inhibitora korozije u razblaženim rastvorima hlorida
(Belgrade, Serbia : Engineering Society for Corrosion, 2017)
After sterilization of meat cans in a factory of meat and meat products in Serbia, occurence of corrosion on the can lids was observed. Sterilization of cans is usually performed in the presence of corrosion inhibitors. ...
Mechanisms of hydrogen evolution on chromium / Mehanizmi izdvajanja vodonika na hromu
(Institut za rudarstvo i metalurgiju Bor, 2015)
In this work, the mechanisms of hydrogen evolution on the metal chromium in a solution of 0.1 M Na2SO4 + H2SO4, pH 1 to pH 7 were analysed. In the pH LT 3 range, hydrogen is evolved according to three different mechanisms, ...