Претраживање
Приказ резултата 11-20 од 28
Zn-Co-CeO2 vs. Zn-Co Coatings: Effect of CeO2 Sol in the Enhancement of the Corrosion Performance of Electrodeposited Composite Coatings
(MDPI, 2021)
Electrodeposition and characterization of novel ceria-doped Zn-Co composite coatings was
the main goal of this research. Electrodeposited composite coatings were compared to pure Zn-Co
coatings obtained under the same ...
Influence of Parameters and Regimes of the Electrodeposition on Hardness of Copper Coatings
(MDPI, 2023)
Correlation among morphological, structural and hardness characteristics of electrodeposited
copper coatings is presented in this review paper. Cu coatings were produced applying constant galvanostatic (DC) and pulsating ...
Morphology, Structure and Mechanical Properties of Copper Coatings Electrodeposited by Pulsating Current (PC) Regime on Si(111)
(MDPI, 2020)
Copper electrodeposition on (111)-oriented Si substrate was performed by the pulsating current (PC) regime at various average current densities in the range of 15–70 mA·cm−2, obtained by varying either the frequency (30, ...
Analysis and interpretation of bimetallic plasmonic metamaterial properties for forensic applications
(Belgrade : University of Criminal Investigation and Police Studies, 2023)
Plasmonic biochemical sensors, as a subgroup of optical refractometric sensors, are a topic of rapid research and development due to their ability to detect trace amounts of biochemical agents, ...
Influence of electrodeposition regime and Sn:Pd ratios in Sn-Pd electrocatalysts on ethanol oxidation reaction / Влијание на режимот на електродепозицијата и на односите на Sn:Pd во Sn-Pd-електрокатализаторите врз оксидацијата на етанолот
(Society of Chemists and Technologists of MacedoniaSs. Cyril and Methodius University in Skopje, 2023)
A series of bimetallic Sn-Pd catalysts were prepared by a template-free two step electrodeposition method. According to this method, Sn was electrodeposited firstly in potentiostatic or galvanostatic regime on Cu electrodes ...
Optimization of electrodeposition parameters to improve composite hardness of nickel coatings on brass substrate for varying film thicknesses and applied indentation loads
(Belgrade : ETRAN Society, 2022)
In this investigation, nickel coatings were electrodeposited on brass substrate. The effects of
electrodeposition process parameters such as, current density and deposition time (coatings thickness), on surface morphology ...
Morphological and Structural Characterization of Tin Dendritic Nanostructures Produced by Various Electrodeposition Processes
(Belgrade : Serbian Academy of Sciences and ArtsBelgrade : Faculty of Technology and Metallurgy, University of Belgrade, 2022)
In this study, Sn powders were electrodeposited from an alkaline electrolyte containing 20 g/l SnCl2 × 2H2O in 250 g/l NaOH at the room temperature by application of both potentiostatic and
galvanostatic regimes of the ...
Electrochemical study of Nd and Pr co-deposition onto Mo and W from molten oxyfluorides
(MDPI, 2021)
Electrodeposition processes of neodymium and praseodymium in molten NdF3 + PrF3 + LiF + 1 wt.%Pr6O11 + 1 wt.%Nd2O3 and NdF3 + PrF3 + LiF + 2 wt.%Pr6O11 + 2 wt.%Nd2O3 electrolytes at 1323 K were investigated. Cyclic ...
Morphology of aluminium electrodeposited on aluminium from AlCl3+urea solvate ionic liquid
(Society of Physical Chemists of Serbia, 2021)
The ionic liquid, made of urea and AlCl3, known as deep eutectic solvent (DESs) has already shown to be low‐cost electrolyte suitable for aluminum electrodeposition. By applying appropriate potentiostatic or galvanostatic ...
Influence of parameters of the pulsating current (PC) regime on morphological, structural and hardness characteristics of copper coatings electrodeposited on Si(111)
(Niš, Serbia : RAD Centre, 2021)
Electrodeposition of Cu was performed on Si(111) by the pulsating current (PC) regime in the
range of the average current densities (jav) between 15 and 70 mA cm-2
. The selected values of the
average current densities ...