Pretraživanje
Prikaz rezultata 41-48 od 48
Determination of the weld metal corrosion rate using electrochemical techniques / Određivanje brzine korozije metala šava u zavarenom spoju pomoću elektrohemijskih tehnika
(Belgrade, Serbia : Engineering Society for Corrosion, 2015)
To determine corrosion rate of the base metal and weld metal were applied electrochemical techniques: linear polarization resistance, linear sweep voltammetry and electrochemical impedance spectroscopy. The samples were ...
The electrochemical deposition and corrosion stability of Zn-Mn alloy coatings / Elektrohemijsko taloženje i koroziona stabilnost prevlaka Zn-Mn legura
(Belgrade, Serbia : Engineering Society for Corrosion, 2010)
The influence of the type of the deposition solution on the current efficiency during electrodeposition of Zn-Mn alloys was examined. The Zn-Mn alloys were deposited on steel from chloride, sulphate and pyrophosphate plating ...
Tensile strength properties of hybrid magnetic composite materials / Zatezna čvrstoća hibridnih magnetnih kompozitnih materijala
(Belgrade, Serbia : Engineering Society for Corrosion, 2017)
The Nd-Fe-B-barium ferrite hybrid composite materials with epoxy matrix presented in this paper cover maximum energy product from 1 to 13 MGOe. Mixture of magnetic particles is responsible for high magnetic quality, while ...
Magnetic behaviour of hybrid magnetic composite materials / Magnetno ponašanje hibridnih magnetnih kompozitnih materijala
(Belgrade, Serbia : Engineering Society for Corrosion, 2014)
Polymer bonded magnets are contemporary materials with a very large range of applications. The objective of this study is to assess how different content of Nd-Fe-B and/or barium ferrite particles affect on magnetic and ...
The effect of filler morphology on thermal characteristics of lignocellulose and metal powders composites / Uticaj morfologije punioca na termijske karakteristike kompozita lignoceluloze punjene metalnim prahovima
(Belgrade, Serbia : Engineering Society for Corrosion, 2015)
In this manuscript the results of experimental studies of the properties of composite materials based on lignocellulosic matrix (LC) filled with electrolytic copper powder and chemically obtained silver powder are presented. ...
Properties of cotton yarns after oxidation of potassium permanganate in an acidic environment / Svojstva pamučne pređe posle oksidacije kalijum-permanganatom u kiseloj sredini
(Belgrade, Serbia : Engineering Society for Corrosion, 2017)
The impact of nonselective cellulose oxidation (cotton fibre) by potassium permanganate in acidic environment, with or without additional treatment by sodium metabisulfite, on change of sorption (silver ions sorption), and ...
Formation and growth of pits on X5CrNi18-10 austenitic stainless steel in presence of chlorides and sulphates / Formiranje i rast pitova na austenitnom nerđajućem čeliku X5CrNi18-10 u prisustvu hlorida i sulfata
(Belgrade, Serbia : Engineering Society for Corrosion, 2018)
The resistance of X5CrNi18-10 stainless steel to pitting corrosion in a solution containing chlorides and sulphates was tested using the potentiodynamic polarization method. The obtained results show that the stainless ...
Polymer bonded magnetic composites based on Nd-Fe-B / Polimerni magnetni kompoziti na bazi Nd-Fe-B
(Belgrade, Serbia : Engineering Society for Corrosion, 2013)
Various types and contents of magnetic powder and polymer matrix induce different mechanical, magnetic, electrical and optical properties of final composite material. The strong influence of relatively small amounts of ...