Pretraživanje
Prikaz rezultata 31-40 od 51
Cross-section analysis of the morphology of electrodeposited copper obtained in the hydrogen co-deposition range / Morfologija poprečnog preseka prevlaka bakra dobijenih elektrohemijskim taloženjem u oblasti ko-depozicije vodonika
(Serbian Chemical Society, 2009)
Cross-section analysis of copper deposits electrodeposited in the hydrogen co-deposition range at a constant overpotential and in a pulsating overpotential (PO) regime was performed. It was shown that a complete structural ...
Characterization of electrodeposited powders of the system Ni-Mo-O
(Oxford : Pergamon-Elsevier Science Ltd, 2008)
The electrodeposition of the Ni-Mo-O alloy powders from ammonium chloride containing electrolytes for different Ni/Mo ions concentration ratios was investigated by the polarization measurements. The morphology, chemical ...
Morphological and crystallographic characteristics of lead powder obtained by electrodeposition from an environmentally friendly electrolyte
(Elsevier, 2014)
Lead powder obtained by potentiostatic electrodeposition from alkaline electrolyte, based on hydroxide ions, was investigated. The shape of lead crystals strongly depends on overpotentials of electrodeposition. The regular ...
The study of Zn-Co alloy coatings electrochemically deposited by pulse current / Ispitivanje prevlaka Zn-Co legura dobijenih pulsirajućom strujom
(Association of Chemical Engineers of Serbia, 2012)
The electrochemical deposition by pulse current of Zn-Co alloy coatings on steel was examined, with the aim to find out whether pulse plating could produce alloys that could offer a better corrosion protection. The influence ...
Microstructure and corrosion behaviour of Zn-Co alloys deposited from three different plating baths / Mikrostruktura i koroziono ponašanje Zn-Co legura taloženih iz sulfatnog i hloridnih rastvora
(Serbian Chemical Society, 2011)
The effects of plating baths of different composition on the micro- structure and corrosion stability of Zn-Co alloy coatings were studied. Zn-Co alloys with the same Co content were deposited from chloride plating baths ...
Influence of Parameters and Regimes of the Electrodeposition on Hardness of Copper Coatings
(MDPI, 2023)
Correlation among morphological, structural and hardness characteristics of electrodeposited
copper coatings is presented in this review paper. Cu coatings were produced applying constant galvanostatic (DC) and pulsating ...
Ternary Zn-Ni-Co alloy: anomalous codeposition and corrosion stability
(Serbian Chemical Society, 2015)
Electrochemically deposited Zn-Ni-Co alloys under various deposition conditions were investigated using atomic absorption spectroscopy for the determination of the chemical composition, atomic force microscopy for surface ...
Correlation between morphology and magnetic properties of electrochemically produced cobalt powder particles
(Serbian Chemical Society, 2015)
Cobalt 3D powder particles were successfully prepared by galvanostatic electrodeposition. The electrodeposited cobalt powders were characterized by X-ray diffraction (XRD) analysis, scanning electron microscopy (SEM), ...
Some aspects of nickel electrodeposition in the presence of a magnetic field / Neki aspekti taloženja nikla u prisustvu magnetnog polja
(Serbian Chemical Society, 2005)
Nickel deposits obtained from a Watt solution both without and with a perpendicularly oriented magnetic field were examined by scanning electron microscopy (SEM). The nickel deposit obtained without an imposed magnetic ...
Correlation between crystal structure and morphology of potentiostatically electrodeposited silver dendritic nanostructures
(Elsevier, 2018)
Silver dendritic nanonstructures obtained by the potentiostatic electrolysis from different electrolytes at different overpotentials were characterized by the scanning electron microscopy (SEM) technique and X-ray diffraction ...