Претраживање
Приказ резултата 1-10 од 38
Influence of process parameters on properties of the 4a zeolite with X-ray and FT-IR instrumental methods characterization / Uticaj procesnih parametara na osobine 4a zeolita uz karakterizaciju X-ray i FT-IR instrumentalnim metodama
(Inženjersko društvo za koroziju, 2018)
For more than three decades 4A zeolite has been an irreplaceable ingredient of powder
detergents, but there is still striving to it’s improvement in order to meet the ever more stringent
market and environmental ...
Analysis of efficiency and reaction rate degradation of cyanide under the influence of current density on steel electrodes / Analiza efikasnosti i brzine reakcije uklanjanja cijanida u zavisnosti od gustine struje na čeličnim elektrodama
(Belgrade, Serbia : Engineering Society for Corrosion, 2013)
Electrolytic treatment of wastewater is a technique in which wastewater is treated by applying electric current through electrodes in the electrochemical reactor. This is actually a combination of many processes such as ...
Molecular descriptors as proxies for the modeling of the materials and their environmental impact / Računarski generisani molekulski deskriptori kao proxi-ji za modelovanje materijala i njihovog uticaja
(Belgrade : Engineering Society for Corrosion, 2016)
For the prediction of material's properties and of interaction of molecules with the surroundings, one needs to know their properties. Usually, the molecular properties are revealed through experimental measurements. It ...
Catalytic activity of sulfuric acid on the morphology of electrochemically obtained copper powder / Katalitičko delovanje sumporne kiseline na morfologiju elektrohemijski dobijenog bakarnog praha
(Belgrade, Serbia : Engineering Society for Corrosion, 2015)
The subject of the research is influence of sulfuric acid on morphology of electrochemically obtained copper powder during galvanostatic electrolysis mode. In this paper electrodeposition of copper powder from sulphate ...
Direct synthesis of noble metal nanostructures on carbon support by hydrothermal process / Direktna sinteza nanostrukturnog plemenitog metala na ugljeničnoj osnovi pomoću hidrotermalnog procesa
(Belgrade, Serbia : Engineering Society for Corrosion, 2015)
Nanostructures of noble metals (Pt and Ag) on carbon support were prepared from fructose and solution of the Nobel metal salts (H2PtCl6 x 6H2O or AgNO3) under hydrothermal conditions. Commercial fructose (C6H12O6) acts as ...
Impedance characteristics of aluminum with sol-gel ceria protective coating during the exposure to chloride corrosion agent / Impedansni odgovor aluminijuma sa zaštitnom prevlakom oksida cerijuma tokom izlaganja hloridnoj korozionoj sredini
(Belgrade, Serbia : Engineering Society for Corrosion, 2016)
Electrochemical impedance characteristics of bare Al and Al with CeO2 coating prepared sol-gel procedure from the ceria sol are investigated. The corrosion behavior is monitored during the exposure to 3 wt. % NaCl aqueous ...
Production of rubber plasticizers based on waste PET: Techno-economical aspect / Sinteza plastifikatora iz otpadnog PET-a za primenu u gumenim proizvodima - tehno-ekonomska analiza
(Belgrade, Serbia : Engineering Society for Corrosion, 2017)
Production of rubber plasticizers, based on waste poly(ethylene terephthalate) (PET), and economic effectiveness of developed technologies are presented and discussed. Waste PET glycolyzates, named diisononyl terephthalate(DINTP), ...
Testing the protective ability of corrosion inhibitors in dilute chloride solutions / Ispitivanje zaštitne sposobnosti inhibitora korozije u razblaženim rastvorima hlorida
(Belgrade, Serbia : Engineering Society for Corrosion, 2017)
After sterilization of meat cans in a factory of meat and meat products in Serbia, occurence of corrosion on the can lids was observed. Sterilization of cans is usually performed in the presence of corrosion inhibitors. ...
Determination of the weld metal corrosion rate using electrochemical techniques / Određivanje brzine korozije metala šava u zavarenom spoju pomoću elektrohemijskih tehnika
(Belgrade, Serbia : Engineering Society for Corrosion, 2015)
To determine corrosion rate of the base metal and weld metal were applied electrochemical techniques: linear polarization resistance, linear sweep voltammetry and electrochemical impedance spectroscopy. The samples were ...
PtAu catalyst with enhanced activity for formic acid oxidation / PtAu katalizator sa poboljšanom aktivnošću za reakciju oksidacije mravlje kiseline
(Belgrade, Serbia : Engineering Society for Corrosion, 2018)
PtAu systems are recognized as good catalysts for the oxidation of formic acid electrooxidation, which is investigated as a possible anodic reaction in low-temperature fuel cells. In this research, bimetallic PtAu ...