Претраживање
Приказ резултата 1-10 од 75
The influence of chemical composition on microstructure, hardness and electrical conductivity of Ag-Bi-In alloys at 100 degrees C
(Serbia : Association of Metallurgical Engineers of Serbia AMES, 2017)
Considering possible applications and scarceness of literature data, Ag-Bi-In system was investigated in terms of microstructure, mechanical and electrical properties of ternary alloys from an isothermal section at 100 °C. ...
On the properties of hot forged Ti-6Al-4V alloy aimed for surgical implants
(Belgrade : Association of Metallurgical Engineers of Serbia, 2019)
The investigation here is aimed to examine the structural and mechanical changes that might have occurred during the hot forging process, a process to obtain a surgical hip implant, and the subsequent heat treatment. ...
Molecular descriptors as proxies for the modeling of the materials and their environmental impact / Računarski generisani molekulski deskriptori kao proxi-ji za modelovanje materijala i njihovog uticaja
(Belgrade : Engineering Society for Corrosion, 2016)
For the prediction of material's properties and of interaction of molecules with the surroundings, one needs to know their properties. Usually, the molecular properties are revealed through experimental measurements. It ...
Influence of process parameters on properties of the 4a zeolite with X-ray and FT-IR instrumental methods characterization / Uticaj procesnih parametara na osobine 4a zeolita uz karakterizaciju X-ray i FT-IR instrumentalnim metodama
(Inženjersko društvo za koroziju, 2018)
For more than three decades 4A zeolite has been an irreplaceable ingredient of powder
detergents, but there is still striving to it’s improvement in order to meet the ever more stringent
market and environmental ...
Effect of chemical composition on microstructure, hardness and electrical conductivity profiles of the Bi-Cu-Ga alloys at 100 °C
(Serbia : Association of Metallurgical Engineers of Serbia, 2016)
Theoretical calculation and experimental investigation of the isothermal section of a ternary Bi-Cu-Ga system at 100 oC are presented in this paper. Thermodynamic binary-based calculation of the isothermal section was ...
Field applicable methods for intergranular corrosion testing of stainless steels structures / Metode ispitivanja interkristalne korozije na konstrukcijama od nerđajućh čelika na terenu
(Society for Structural Integrity and Life, 2016)
Determination of the susceptibility of austenitic stainless steel X5CrNi18-10 to intergranular corrosion (IGC) is performed by measuring the corrosion potential Ecorr in a drop of a test solution with specific chemical ...
Organochlorine pesticides in the Tisza River (Serbia): Distribution and risk assessment / Pesticidi u reci Tisi (Srbija) : Distribucija i procena rizika
(Serbia : Matica srpska, 2019)
Paper provided the systematic data on the distribution and risk assess¬ment status of organochlorine pesticides (OCPs) in sediment of the Tisza River (Serbia). The α-HCH, endrin ketone and methoxychlor are the most commonly ...
Analysis of efficiency and reaction rate degradation of cyanide under the influence of current density on steel electrodes / Analiza efikasnosti i brzine reakcije uklanjanja cijanida u zavisnosti od gustine struje na čeličnim elektrodama
(Belgrade, Serbia : Engineering Society for Corrosion, 2013)
Electrolytic treatment of wastewater is a technique in which wastewater is treated by applying electric current through electrodes in the electrochemical reactor. This is actually a combination of many processes such as ...
Ternary Bi-Cu-Ni alloys – thermodynamics, characterization, mechanical and electrical properties
(Serbia : Association of Metallurgical Engineers of Serbia, 2017)
The Bi–Cu–Ni ternary system belongs to the group of potential Cu-Ni-based advanced lead-free solder materials for high temperature application. The paper shows results of the thermodynamic calculations using general solution ...
Treatment of waste sulfuric acid copper electrolyte / Tretman otpadnog sumporno-kiselog elektrolita bakra
(Institut za rudarstvo i metalurgiju Bor, 2014)
The aim of this paper was to investigate the possibility of using the copper anodes with high nickel content for electrolytic treatment of waste sulfuric acid copper electrolyte. Nickel content in each anode was about 10 ...