Претраживање
Приказ резултата 1-10 од 13
An electrochemical illustration of the mathematical modelling of chlorine impact and acidification in electrochemical tumour treatment and its application on an agar-agar gel system
(Elsevier, 2003)
Electrochemical treatment (EchT) of tumours, which is also known as electrochemical therapy, implies that tumour tissue is treated with a direct current through the use of electrodes. This was shown earlier when the major ...
On the deactivation mechanism of RuO2–TiO2/Ti anodes prepared by the sol–gel procedure
(Elsevier, 2005)
The deactivation process that leads to the end of titanium supported RuO2-TiO2 coating service life, for anodes prepared from RuO2 and TiO2 sols, as well as by the conventional thermal decomposition of RuCl3 and TiCl3, was ...
The effect of hydrogen codeposition on the morphology of copper electrodeposits. 1. The concept of effective overpotential
(Elsevier, 2006)
The effect of hydrogen codeposition on the morphology of copper electrodeposits was studied. The dependences of the overall current and the volume of evolved hydrogen on the quantity of electricity used were plotted and ...
Electrochemical deposition of Ni–W alloys from ammonia–citrate electrolyte
(Elsevier, 2003)
Ammonia-citrate electrolyte is one of the solutions that are used in practice for electroplating Ni-W alloys. In this contribution, a systematic effort was made to clarify some controversies about the mechanism of the ...
The effect of hydrogen co-deposition on the morphology of copper electrodeposits. II. Correlation between the properties of electrolytic solutions and the quantity of evolved hydrogen
(Elsevier, 2008)
Formation of irregular deposits by electrodeposition from acid sulfate solutions of various H2SO4 concentrations was examined by the determination of the average current efficiency of hydrogen evolution and by the scanning ...
The structure, growth and reactivity of electrodeposited Ru/Au(111) surfaces
(Elsevier, 2001)
In order to elucidate electronic effects on the oxidation of CO on small Ru clusters, we investigated this reaction on well defined Ru/Au(111) model systems via parallel in-situ STM studies of the structure and electrochemical ...
Structural characteristics of bright copper surfaces
(Journal of Electroanalytical Chemistry, 2001)
In this work, the structures of copper surfaces polished mechanically and polished both mechanically and electrochemically, as well as copper coatings obtained in the presence of basic and top brightening addition agents ...
Capacitive properties of RuO2-coated titanium electrodes prepared by the alkoxide ink procedure
(Elsevier, 2007)
The capacitive properties of titanium electrodes with an active porous RuO2 coating were investigated in H2SO4 and NaCl solution by cyclic voltammetry and electrochemical impedance spectroscopy. Electrodes with two different ...
Influence of potential pulse conditions on the formation of honeycomb-like copper electrodes
(Elsevier, 2009)
Electrodeposition of copper by pulsating overpotential (PO) regime in the hydrogen co-deposition range was examined by the determination of the average current efficiency of hydrogen evolution and by microscopic analysis ...
Methanol oxidation at platinum electrodes in alkaline solution: comparison between supported catalysts and model system
(Elsevier, 2004)
Methanol oxidation was studied in 0.1 M NaOH at supported Pt electrodes, and compared with the single crystal Pt electrodes, Pt(1 1 1), Pt(1 1 0) and Pt(3 3 2), chosen as model systems, and with a polycrystalline Pt ...