Претраживање
Приказ резултата 41-50 од 78
The resistance to general corrosion of series of zinc-aluminum alloys modified with silicon and strontiumloys modified with silicon and strontium / Otpornost na opštu koroziju serije legura cink-aluminijum koje su modifikovane silicijumom i stroncijumom
(Belgrade : Engineering Society for Corrosion, 2019)
The resistance to corrosion of the series of zinc-aluminum casting alloys modified with silicon and
strontium was studied in a sodium chloride solution. It was shown that general corrosion was the
main form of corrosion ...
Determination of the weld metal corrosion rate using electrochemical techniques / Određivanje brzine korozije metala šava u zavarenom spoju pomoću elektrohemijskih tehnika
(Belgrade, Serbia : Engineering Society for Corrosion, 2015)
To determine corrosion rate of the base metal and weld metal were applied electrochemical techniques: linear polarization resistance, linear sweep voltammetry and electrochemical impedance spectroscopy. The samples were ...
Corrosion properties of an aluminium alloy 7000 series after a new two step precipitation hardening / Otpornost prema koroziji aluminijumske legure serije 7000 posle novog dvostepenog termičkog taloženja
(Belgrade, Serbia : Engineering Society for Corrosion, 2014)
Corrosion properties of an aluminium alloy 7000 series were investigated by different electrochemical methods. The alloy was subjected to the one-step and to a new two-step precipitation hardening. Polarization measurements ...
Modified tannins for alkyd based anticorrosive coatings / Primena modifikovanih tanina u antikorozionim alkidnim premazima
(Belgrade : Engineering Society for Corrosion, 2019)
The study of the synthesis of anticorrosive inhibitors, based on chemically modified tannins, and
their use in alkyd based coatings to improve anticorrosive properties is presented in this work.
Two methods of tannin ...
Testing the protective ability of corrosion inhibitors in dilute chloride solutions / Ispitivanje zaštitne sposobnosti inhibitora korozije u razblaženim rastvorima hlorida
(Belgrade, Serbia : Engineering Society for Corrosion, 2017)
After sterilization of meat cans in a factory of meat and meat products in Serbia, occurence of corrosion on the can lids was observed. Sterilization of cans is usually performed in the presence of corrosion inhibitors. ...
Mechanisms of hydrogen evolution on chromium / Mehanizmi izdvajanja vodonika na hromu
(Institut za rudarstvo i metalurgiju Bor, 2015)
In this work, the mechanisms of hydrogen evolution on the metal chromium in a solution of 0.1 M Na2SO4 + H2SO4, pH 1 to pH 7 were analysed. In the pH LT 3 range, hydrogen is evolved according to three different mechanisms, ...
Monitoring of underground water: Necessary step in determining the method for site remediation / Monitoring podzemnih voda - neophodan korak u utvrđivanju načina sanacije kontaminiranog lokaliteta
(Belgrade, Serbia : Engineering Society for Corrosion, 2016)
The object of this study was to investigate the quality of underground water on the location of heating plant 'Novi Beograd' (Serbia). The examination included a system of 10 piezometers (P1, P5, P6, P7, P8, P9, P10, P11, ...
Characterization of soil in the coastal area of the Bor River abstract / Karakterizacija zemljišta u priobalju Borske reke
(Belgrade, Serbia : Engineering Society for Corrosion, 2016)
Production process of copper obtaining in the Mining and Smelting Company (RTB) Bor directly affects the environmental pollution in Bor and surrounding area. Harmful elements present in the air are deposited on the surface ...
How to review a scientific paper / Kako recenzirati naučni rad
(Belgrade, Serbia : Engineering Society for Corrosion, 2017)
A review process is a key factor which ensures reliable and accurate presentation of new, useful, and original scientific knowledge to the public. Despite of many shortcomings which this evaluation of scientific work has, ...
Peer Review of Reviewers: The Author’s Perspective
(MDPI, 2018)
The aim of this study was to investigate the opinion of authors on the overall quality and
effectiveness of reviewers’ contributions to reviewed papers. We employed an on-line survey of thirteen journals which publish ...