Search
Now showing items 1-10 of 16
New method of the determination of specific surface of copper obtained by the electrodeposition / Novi metod određivanja specifične površine elektrohemijski istaloženog bakra
(Belgrade, Serbia : Engineering Society for Corrosion, 2007)
The specific surface of electrodeposited copper was determined using recently proposed way for the estimation of the real surface area of metal deposits. The obtained values of the specific surface of copper deposits were ...
Influence of Parameters and Regimes of the Electrodeposition on Hardness of Copper Coatings
(MDPI, 2023)
Correlation among morphological, structural and hardness characteristics of electrodeposited
copper coatings is presented in this review paper. Cu coatings were produced applying constant galvanostatic (DC) and pulsating ...
Some aspects of nickel electrodeposition in the presence of a magnetic field / Neki aspekti taloženja nikla u prisustvu magnetnog polja
(Serbian Chemical Society, 2005)
Nickel deposits obtained from a Watt solution both without and with a perpendicularly oriented magnetic field were examined by scanning electron microscopy (SEM). The nickel deposit obtained without an imposed magnetic ...
Electrochemical aspects of formation of dendrites / Elektrohemijski aspekti formiranja dendrita
(Belgrade, Serbia : Engineering Society for Corrosion, 2016)
The one of the main contributions of Belgrade Electrochemical School to the field of metal electrodeposition is investigation of a mechanism of formation and growth of the disperse deposits. Spongy-like, cauliflower-like, ...
Comparative analysis of the polarization and morphological characteristics of electrochemically produced powder forms of the intermediate metals
(Macedonian Journal of Chemistry and Chemical Engineering, 2014)
The polarization and morphological characteristics of powder forms of the group of the intermediate metals were examined by the analysis of silver and copper electrodeposition processes at high overpotentials. The pine-like ...
Cross-section analysis of the morphology of electrodeposited copper obtained in the hydrogen co-deposition range / Morfologija poprečnog preseka prevlaka bakra dobijenih elektrohemijskim taloženjem u oblasti ko-depozicije vodonika
(Serbian Chemical Society, 2009)
Cross-section analysis of copper deposits electrodeposited in the hydrogen co-deposition range at a constant overpotential and in a pulsating overpotential (PO) regime was performed. It was shown that a complete structural ...
Morphology, Structure and Mechanical Properties of Copper Coatings Electrodeposited by Pulsating Current (PC) Regime on Si(111)
(MDPI, 2020)
Copper electrodeposition on (111)-oriented Si substrate was performed by the pulsating current (PC) regime at various average current densities in the range of 15–70 mA·cm−2, obtained by varying either the frequency (30, ...
Morphology, structure and hardness of electrolytically produced copper coatings
(2022)
Poster presented at: 4th International Congress of Chemists and Chemical Engineers of Bosnia and Herzegovina, June, 30th-July, 02nd, Sarajevo, Bosnia and Herzegovina
Mechanical Properties of Electrolytically Produced Copper Coatings Reinforced with Pigment Particles
(MDPI, 2023)
Copper from sulfate baths without and with added inorganic pigment particles based on strontium aluminate doped with europium and dysprosium (SrAl2O4: Eu2+, Dy3+) was electrodeposited on a brass cathode by a galvanostatic ...
Effect of temperature on the electrodeposition of disperse copper deposits / Uticaj temperature na elektrohemijsko taloženje disperznih taloga bakra
(Serbian Chemical Society, 2007)
The effect of temperature on the electrodeposition of copper at overpotentials belonging to the plateau of the limiting diffusion current density and higher was examined by the determination of the average current efficiency ...