Претраживање
Приказ резултата 41-50 од 53
Characterization of electrodeposited powders of the system Ni-Mo-O
(Oxford : Pergamon-Elsevier Science Ltd, 2008)
The electrodeposition of the Ni-Mo-O alloy powders from ammonium chloride containing electrolytes for different Ni/Mo ions concentration ratios was investigated by the polarization measurements. The morphology, chemical ...
Influence of Parameters and Regimes of the Electrodeposition on Hardness of Copper Coatings
(MDPI, 2023)
Correlation among morphological, structural and hardness characteristics of electrodeposited
copper coatings is presented in this review paper. Cu coatings were produced applying constant galvanostatic (DC) and pulsating ...
The electrochemical deposition and corrosion stability of Zn-Mn alloy coatings / Elektrohemijsko taloženje i koroziona stabilnost prevlaka Zn-Mn legura
(Belgrade, Serbia : Engineering Society for Corrosion, 2010)
The influence of the type of the deposition solution on the current efficiency during electrodeposition of Zn-Mn alloys was examined. The Zn-Mn alloys were deposited on steel from chloride, sulphate and pyrophosphate plating ...
Electrochemical study of Nd and Pr co-deposition onto Mo and W from molten oxyfluorides
(MDPI, 2021)
Electrodeposition processes of neodymium and praseodymium in molten NdF3 + PrF3 + LiF + 1 wt.%Pr6O11 + 1 wt.%Nd2O3 and NdF3 + PrF3 + LiF + 2 wt.%Pr6O11 + 2 wt.%Nd2O3 electrolytes at 1323 K were investigated. Cyclic ...
Magnetoresistance Controls Arboreous Bead-Dendritic Growth of Magnetic Electrodeposits: Experimental and Theoretical Results
(The Electrochemical Society, Inc., 2004)
The effect of magnetic fields applied on magnetic metals electrodeposition was examined. Nickel deposits obtained from a Watt solution with coumarin, at cathodic potentials of -1000, -1200, and -1300 mV/SCE, without and ...
A Novel Two-Step Electrochemical Deposition Method for Sn-Pd Electrocatalyst Synthesis for a Potential Application in Direct Ethanol Fuel Cells
(MDPI, 2023)
Sn-Pd electrocatalysts with a constant atomic ratio of 60 at.% Sn‒40 at.% Pd suitable for
potential application in direct ethanol fuel cells were synthesized using a novel two-step electrodeposition method. First, Sn was ...
Phase-structure analysis of brass by anodic linear-sweep voltammetry
(Springer, 1992)
Anodic linear-sweep voltammetry (ALSV) was applied to electrodeposited alloy layers and to metallurgically obtained Cu−Zn alloys of different composition and structure. Metallurgically obtained samples covered the range ...
Characterization of electrochemically formed thin layers of binary alloys by linear sweep voltammetry
(Springer, 1988)
It has been demonstrated that linear sweep voltammetry can be used as anin situ technique for characterization of electrodeposited thin layers of binary alloys. The anodic dissolution characteristics of linear sweep ...
Mechanical Properties of Electrolytically Produced Copper Coatings Reinforced with Pigment Particles
(MDPI, 2023)
Copper from sulfate baths without and with added inorganic pigment particles based on strontium aluminate doped with europium and dysprosium (SrAl2O4: Eu2+, Dy3+) was electrodeposited on a brass cathode by a galvanostatic ...
Identification of intermetallic compounds in electrodeposited copper-cadmium alloys by electrochemical techniques
(Elsevier, 1989)
Anodic sweep voltammetry was used to identify different intermetallic compounds and assess their amount in copper-cadmium alloys. Four compounds are found in thin (1–8 μm) electroplated alloy films: CuCd3, Cu5Cd8, Cu4Cd3 ...