Претраживање
Приказ резултата 31-40 од 41
Removal of copper by pelletized fly ash
(Association of Metallurgical Engineers of Serbia (AMES), 2019)
Recent investigations are focused on the possibility of waste utilization as potential adsorbents in wastewater treatments. Industrial by-products and wastes are almost zero-cost raw materials and at the same time, their ...
Controllable synthesis of Fe3O4-wollastonite adsorbents for efficient heavy metal ions/oxyanions removal
(Springer, 2019)
Iron oxide, in the form of magnetite (MG)–functionalized porous wollastonite (WL), was used as an adsorbent for heavy metal ions (cadmium and nickel) and oxyanions (chromate and phosphate) removal from water. The porous ...
Preparation And Characterization Of Polymer Supported Goethite Sorbent For Arsenate Removal
(SaTCIP (Scientific and Technical Center for Intellectual Property) Ltd, 2014)
The aim of this work is to present a novel functionalized high surface area, macro porous material for selective removal of arsenic from water solution. A simple and room temperature reaction with controlled precipitation ...
Adsorption study on natural clays as cement mineral additives: possibility of toxic metallic cations immobilization
(Serbian Ceramic Society, 2018)
Evironmetally safe mortars in which part of the cement binder was replaced by mineral
additives (i.e. zeolite, bentonite and fly ash) were designed. Fly ash, as fine powdery byproduct
of coal combustion, comprises heavy ...
Concentration method for the mining wastewater-valorization of the copper
(The Regional Environmental Center for Central and Eastern Europe, 2013)
During the mining process of copper exploitation, a large amount of wastewater is generated. Not only do the copper ions contaminate the water but also represent a great loss for the copper production industry. Negative ...
Controllable synthesis of Fe3O4-wollastonite adsorbents for efficient heavy metal ions/oxyanions removal
(Springer, 2019)
Iron oxide, in the form of magnetite (MG)–functionalized porous wollastonite (WL), was used as an adsorbent for heavy metal ions (cadmium and nickel) and oxyanions (chromate and phosphate) removal from water. The porous ...
Differently shaped nanocrystalline (Fe, Y)3O4 and its adsorption efficiency toward inorganic arsenic species
(IOP Publishing, 2019)
Herein we report effects of partial substitution of Fe3+ by Y3+ in magnetite (Fe3O4) on morphology and inorganic arsenic species adsorption efficiency of the Fe3−x Y x O4 nanoparticles formed. The series of Fe3−x Y x O4 ...
Adsorption of azo dyes on polymer materials / Adsorpcija azo boja na polimernim materijalima
(Association of Chemical Engineers of Serbia, 2013)
The use of polymeric adsorbents for the removal of azo dyes from solution has been reviewed. Adsorption techniques are widely used to remove certain classes of pollutants from waters, especially those which are not easily ...
Kinetics of adsorption of mixed pollutants by organobentonite
(Society of Physical Chemists of Serbia, 2010)
Quantitative substitution of the interlayer cations of smectite by hexadecyl trimethylammonium ions (HDTMA) was performed in order to prepare adsorbent able to simultaneously adsorb toxic metal cations and organic pollutants. ...
Adsorption properties of TENT fly ash in removal of copper from wastewater
(Bor : University of Belgrade - Technical Faculty in Bor, 2013)
The objective of this study was to monitor the behavior of fly ash originated from the power plant Nikola Tesla as a low cost absorbent for removal of copper ions from synthetic aqueous solutions. Fly ash, a potentional ...