Search
Now showing items 21-30 of 82
Investigation of phenol adsorption on macroporous polymeric adsorbents / Ispitivanje adsorpcije fenola na makroporoznim polimernim adsorbensima
(Belgrade, Serbia : Engineering Society for Corrosion, 2015)
This work reports results on phenol adsorption from aqueous solution by porous copolymers based on glycidyl methacrylate: two samples of macroporous crosslinked poly(glycidyl methacrylate-co-ethylene glycol dimethacrylate), ...
Catalytic effect of sulphuric acid in the process of deposition of chromium coatings / Katalitički uticaj sumporne kiseline u procesu taloženja prevlaka hroma
(Belgrade, Serbia : Engineering Society for Corrosion, 2011)
This paper analyzes the catalytic effect of sulphuric acid on current efficiency, the coating thickness and the rate of deposition of electrochemical chromium coatings. According to the properties of chrome, there are three ...
PtAu catalyst with enhanced activity for formic acid oxidation / PtAu katalizator sa poboljšanom aktivnošću za reakciju oksidacije mravlje kiseline
(Belgrade, Serbia : Engineering Society for Corrosion, 2018)
PtAu systems are recognized as good catalysts for the oxidation of formic acid electrooxidation, which is investigated as a possible anodic reaction in low-temperature fuel cells. In this research, bimetallic PtAu ...
The roughness analysis of metal coatings by STM technique: Part II: Analysis of zinc coatings / Analiza hrapavosti galvanskih prevlaka tehnikom skenirajuće tunelske mikroskopije - deo II - analiza prevlaka cinka
(Belgrade, Serbia : Engineering Society for Corrosion, 2002)
In this work is given the analysis of roughness of zinc coatings electrodeposited from a sulfate bath in the presence of dextrin and 2-hidroxi-benzaldehyde, by methodology which is described in part I of this work. It was ...
Direct synthesis of noble metal nanostructures on carbon support by hydrothermal process / Direktna sinteza nanostrukturnog plemenitog metala na ugljeničnoj osnovi pomoću hidrotermalnog procesa
(Belgrade, Serbia : Engineering Society for Corrosion, 2015)
Nanostructures of noble metals (Pt and Ag) on carbon support were prepared from fructose and solution of the Nobel metal salts (H2PtCl6 x 6H2O or AgNO3) under hydrothermal conditions. Commercial fructose (C6H12O6) acts as ...
Comparison of morphology of powder particles obtained by the constant and periodically changing regimes of electrolysis / Poređenje morfologije čestica praha dobijenih konstantnim i periodično promenljivim režimima elektrolize
(Belgrade, Serbia : Engineering Society for Corrosion, 2011)
Morphologies of copper powder particles obtained by both potentiostatic and pulsating overpotential (PO) regimes of electrolysis were analyzed using the technique of scanning electron microscopy (SEM). The parameters of ...
The roughness analysis of metal coatings by STM technique: Part I: Theoretical survey / Analiza hrapavosti galvanskih prevlaka tehnikom skenirajuće tunelske mikroskopije - deo I - teorijski osnovi
(Belgrade, Serbia : Engineering Society for Corrosion, 2002)
In this work is given theoretical base of methodology which, by use STM technique and corresponding STM software, offers an good conveniences for the examination of mechanism of electrode position process.
Laser cleaning of the archaeological metal sample from the Danube / Istraživanje mogućnosti primene lasera u čišćenju arheoloških metalnih predmeta
(Belgrade, Serbia : Engineering Society for Corrosion, 2018)
The paper presents the results of laser cleaning of corrosive and other deposits on a metal archaeological artefact from the Danube. Nd: YAG laser, energy up to 750 mJ and wavelengths λ = 1064 nm and 532 nm is used. The ...
Characterization of electrochemically synthesized pani on graphite electrode for potential use in electrochemical power sources / Elektrohemijska sinteza i karakterizacija elektrode od polianilina za potencijalnu upotrebu u elektrohemijskim izvorima energije
(Belgrade, Serbia : Engineering Society for Corrosion, 2009)
Polyaniline (PANI) on graphite electrode was synthesized electrochemically under galvanostatic condition at current density of 2.0 mA cm-2 from aqueous solution of 1.0 moldm-3 HCl and 0.25 mol dm-3 aniline monomer. ...
Characterization of soil in the coastal area of the Bor River abstract / Karakterizacija zemljišta u priobalju Borske reke
(Belgrade, Serbia : Engineering Society for Corrosion, 2016)
Production process of copper obtaining in the Mining and Smelting Company (RTB) Bor directly affects the environmental pollution in Bor and surrounding area. Harmful elements present in the air are deposited on the surface ...