Претраживање
Приказ резултата 1-10 од 13
Morphology and capacitive properties of [RuOxH y/low-surface area carbon black] composite materials prepared by sol-gel procedure
(Materials Science Forum, 2005)
The morphology and the capacitive properties of carbon supported hydrous ruthenium oxide (RuOxHy/C), prepared by impregnation of low-surface area carbon black Vulcan® XC-72 R with solid phase of RuO xHy sol, were investigated ...
Phase composition and magnetic properties of multiphase melt-spun Nd 4.3Fe76.2B19.5alloy
(Materials Science Forum, 2007)
Phase transformations and magnetic properties of multiphase Nd 4.5Fe76.2B19.5 alloy were investigated in the temperature range of heat treatment 600-700°C. The influence of different heat treatment regimes was observed by ...
Segmented thermistors printed by NTC nanometric paste and applied in volume air-flow sensors
(Materials Science Forum, 2006)
An investigation path starting from (Mn,Ni,Co,Fe)3O4 nanometric powder preparation, NTC thick-film characterization, realization and optimization of new planar thermistor geometries to custom design thermistors and their ...
Nanoscale topography of GC/Pt-C and GC/Pt-Ru-C electrodes studied by means of STM, AFM and XRD methods
(Materials Science Forum, 2006)
Electrodes, assigned as GC/Pt-C and GC/Pt-Ru-C, were formed by deposition of Pt-based catalysts (47.5 wt % Pt + high surface area carbon) and (54 wt. % Pt-Ru alloy + high surface area carbon) on glassy carbon (GC) discs. ...
Hydrogenation of soybean oil over Ag-Ni/diatomite catalysts. Effect of silver content on the cis/trans isomerization selectivity
(Materials Science Forum, 2006)
Silver promoted nickel catalysts supported on diatomite were prepared by precipitation method. Characterization of the catalysts prepared with different silver contents (0.1-4.0 wt%) included AAS, XRD, Hg porosimetry, BET ...
Examinations of cross-linked polyvinylpyridine in open reactor
(Materials Science Forum, 2005)
Macroporous cross-linked copolymer of 4-vinylpyridine and 25% (4:1) divinylbenzene is analyzed under open conditions, that is in a continuous well-stirred tank reactor (CSTR). With this aim the appropriate bifurcation ...
Morphology and phase composition of Ni-Co alloy powders electrodeposited from ammonium sulfate-boric acid electrolyte
(Materials Science Forum, 2006)
In this paper the morphology of Ni-Co powders electrodeposited from ammonium sulfate-boric acid containing electrolyte is investigated as a function of alloy powder composition. Composition of the electrolyte, i.e. the ...
Mechanically activated synthesis of CaTiO3 from mixture of CaO and TiO2
(Materials Science Forum, 2005)
Crystalline calcium titanate was synthesized by mechanical activation of a mixture of CaO, obtained by thermal treatment of CaCO3, and TiO 2 in anatase or rutile form, in a planetary ball mill for 30, 60, 120 and 240 min.. ...
A study of water influence on carbon monoxide adsorption and oxidation on nanocrystals of: γ-Fe2O3, Au/Fe2O 3 and MnxZn1-xFe2O4
(Materials Science Forum, 2006)
In this paper the adsorption and oxidation of CO on nanocrystalline Au/γ-Fe2O3, Au/α-Fe2O3, γ-Fe2O3 and a series of mixed ferrite with Mn xZn1-xFe2O4 composition are investigated. The catalysts were prepared by co-precipitation ...
Characterization and catalytic activity of poly(4-vinylpyridine-co- divinylbenzene)-Co2+ complex
(Materials Science Forum, 2005)
Poly(4-vinylpyridine-co-divinylbenzene)-Co2+ was characterized using infrared spectroscopy (IR), thermogravimetric analysis (TG-DTA), N 2-physisorption and polarography. Thermal analysis suggests sufficient thermal stability ...