Претраживање
Приказ резултата 1-9 од 9
Artificial Neural Network for Composite Hardness Modeling of Cu/Si Systems Fabricated Using Various Electrodeposition Parameters
(Institute of Electrical and Electronics Engineers (IEEE), 2019)
Copper coatings are produced on silicon wafer by electrodeposition (ED) for various cathode current densities. The resulting composite systems consist of 10 μm monolayered copper films electrodeposited from sulphate bath ...
Reducing Adverse Effects of Copper on Alivibrio fischeri Using Microbial Levan and Pullulan
(Chemical Society of Montenegro, 2023)
Aim of this study wvas to determine effects of levan and pullulan on bioluminescence of A. fischeri after acute Cu2+ exposure.
Structural, Electrical and Mechanical Behavior of Thin Copper Coatings Obtained by Various Electrodeposition Processes
(Institute of Electrical and Electronics Engineers (IEEE), 2021)
Electrochemically deposited copper coatings obtained from sulfate baths on brass substrates in the regime of direct current (DC) with and without an application of ultrasound mixing of electrolytes (DC/US) have been studied. ...
Poster presentation: "Palladium-copper bimetallic nanocatalyst for electrochemical ethanol oxidation and oxygen reduction in alkaline media"
(2023)
The necessity of replacement of traditional energy sources with renewable and green alternatives has initiated vast research of direct alcohol fuel cells (DAFC). Ethanol is non-toxic and its crossover through a membrane ...
Copper removal capacity by zeolite: Comparation in a batch and fixed-bed system
(Belgrade, Serbia : University of Belgrade - Faculty of Mining and Geology, 2019)
The increasing levels of industrial wastewater that are released to the environment present a serious threat to human health, living resources, and ecological systems. Zeolites tested for removal of Cu+2 from contaminated ...
XRF and LIBS measuring on metal and ceramic laser-cleaned surfaces
(Budapest: International Measurement Confederation (IMEKO), 2016)
The use of lasers in the conservation of artefacts plays an important role since its posibilities of safe, efficient and efective cleaning on complex surfaces and wide range of materials. This paper presents the results ...
Recovery of Copper from ore dump using bioleaching approach
(Society of Physical Chemists of Serbia, 09-2022)
Bioleaching is an environmentally-friendly approach for the extraction of useful metals from low-grade ores and secondary mineral materials.
The object of this paper was to examine the possibility of microbiological ...
Sorption of copper by fly ash
(University of Belgrade, Technical Faculty in Bor, 2018)
This study is occupied by using fly ash for copper removal from the acid mine wastewater and a synthetic solution of similar composition. Chemical analysis of mine wastewater proved that the values of Cu, Zn, Fe, and Mn ...
Palladium-copper bimetallic nanocatalyst for electrochemical ethanol oxidation and oxygen reduction in alkaline media
(Lausanne, Switzerland : International Society of Electrochemistry, 2023)
The necessity of replacement of traditional energy sources with renewable and green alternatives has initiated vast research of direct alcohol fuel cells (DAFC). Ethanol is non-toxic and its crossover through a membrane ...