Претраживање
Приказ резултата 1-8 од 8
Influence of process parameters on properties of the 4a zeolite with X-ray and FT-IR instrumental methods characterization / Uticaj procesnih parametara na osobine 4a zeolita uz karakterizaciju X-ray i FT-IR instrumentalnim metodama
(Inženjersko društvo za koroziju, 2018)
For more than three decades 4A zeolite has been an irreplaceable ingredient of powder
detergents, but there is still striving to it’s improvement in order to meet the ever more stringent
market and environmental ...
Obtaining and characterization of multilayer nickel thin films electrodeposited with the assistance of ultrasonic agitation / Dobijanje i karakterizacija višeslojnih tankih filmova nikla elektrodeponovanih uz pomoć ultrazvučnog mešanja
(Belgrade, Serbia : Engineering Society for Corrosion, 2018)
Multilayer composite structures of electrodeposited Ni films on polycrystalline copper substrates were fabricated with the assistance of ultrasonic agitation. Alternate ordinary and ultrasonicassisted electrodeposition of ...
CO tolerant Pt/Ru0.7Ti0.3O2 nanocatalyst for hydrogen oxidation reaction / Pt/Ru0,7Ti0,3O2 kao nanokatalizator za oksidaciju vodonika i njegova tolerancija na CO
(Belgrade, Serbia : Engineering Society for Corrosion, 2018)
The oxidation of pure H2 and H2/CO mixture (100 ppm CO) was investigated on Pt nanocatalyst supported on Ru0.7Ti0.3O2 (Pt /Ru0.7Ti0.3O2) by linear sweep voltammetry at a rotating disc electrode in 0.1 M HClO4. The results ...
Laser cleaning of the archaeological metal sample from the Danube / Istraživanje mogućnosti primene lasera u čišćenju arheoloških metalnih predmeta
(Belgrade, Serbia : Engineering Society for Corrosion, 2018)
The paper presents the results of laser cleaning of corrosive and other deposits on a metal archaeological artefact from the Danube. Nd: YAG laser, energy up to 750 mJ and wavelengths λ = 1064 nm and 532 nm is used. The ...
PtAu catalyst with enhanced activity for formic acid oxidation / PtAu katalizator sa poboljšanom aktivnošću za reakciju oksidacije mravlje kiseline
(Belgrade, Serbia : Engineering Society for Corrosion, 2018)
PtAu systems are recognized as good catalysts for the oxidation of formic acid electrooxidation, which is investigated as a possible anodic reaction in low-temperature fuel cells. In this research, bimetallic PtAu ...
Tailoring the corrosion resistance of Zn-Mn coating by electrodeposition from deep eutectic solvents / Poboljšanje korozione postojanosti Zn-Mn prevlake, elektrohemijskim taloženjem iz dubokih eutektičkih smeša
(Belgrade, Serbia : Engineering Society for Corrosion, 2018)
Well adhered, homogenous coatings were obtained from deep eutectic solvents (DES) based on choline chloride and urea, at current densities up to 20 mA cm-2. The coatings' morphology was analyzed by atomic force microscopy, ...
Correlation between crystal orientation and morphology of electrolytically produced powder particles: Analysis of the limiting cases / Korelacija izmedju orijentacije kristala i morfologije elektrolitički proizvedenih praškastih čestica - analiza graničnih slučajeva
(Belgrade, Serbia : Engineering Society for Corrosion, 2018)
Lead and nickel powder particles were produced by the processes of electrolysis and characterized by scanning electron microscope (SEM). The X-ray diffraction (XRD) analysis of the produced particles was done. Morphologies ...
Formation and growth of pits on X5CrNi18-10 austenitic stainless steel in presence of chlorides and sulphates / Formiranje i rast pitova na austenitnom nerđajućem čeliku X5CrNi18-10 u prisustvu hlorida i sulfata
(Belgrade, Serbia : Engineering Society for Corrosion, 2018)
The resistance of X5CrNi18-10 stainless steel to pitting corrosion in a solution containing chlorides and sulphates was tested using the potentiodynamic polarization method. The obtained results show that the stainless ...