Претраживање
Приказ резултата 21-30 од 67
Comparative analysis of the polarization and morphological characteristics of electrochemically produced powder forms of the intermediate metals
(Macedonian Journal of Chemistry and Chemical Engineering, 2014)
The polarization and morphological characteristics of powder forms of the group of the intermediate metals were examined by the analysis of silver and copper electrodeposition processes at high overpotentials. The pine-like ...
Cross-section analysis of the morphology of electrodeposited copper obtained in the hydrogen co-deposition range / Morfologija poprečnog preseka prevlaka bakra dobijenih elektrohemijskim taloženjem u oblasti ko-depozicije vodonika
(Serbian Chemical Society, 2009)
Cross-section analysis of copper deposits electrodeposited in the hydrogen co-deposition range at a constant overpotential and in a pulsating overpotential (PO) regime was performed. It was shown that a complete structural ...
The study of Zn-Co alloy coatings electrochemically deposited by pulse current / Ispitivanje prevlaka Zn-Co legura dobijenih pulsirajućom strujom
(Association of Chemical Engineers of Serbia, 2012)
The electrochemical deposition by pulse current of Zn-Co alloy coatings on steel was examined, with the aim to find out whether pulse plating could produce alloys that could offer a better corrosion protection. The influence ...
Some aspects of nickel electrodeposition in the presence of a magnetic field / Neki aspekti taloženja nikla u prisustvu magnetnog polja
(Serbian Chemical Society, 2005)
Nickel deposits obtained from a Watt solution both without and with a perpendicularly oriented magnetic field were examined by scanning electron microscopy (SEM). The nickel deposit obtained without an imposed magnetic ...
Effect of the orientation of the initially formed grains on the final morphology of electrodeposited lead
(Serbian Chemical Society, 2014)
The processes of Pb electrodeposition under diffusion control were examined by scanning electron microscopy (SEM) of the formed crystals. The orientation of grains of hexagonal shape formed in the initial stage of ...
Microstructure and corrosion behaviour of Zn-Co alloys deposited from three different plating baths / Mikrostruktura i koroziono ponašanje Zn-Co legura taloženih iz sulfatnog i hloridnih rastvora
(Serbian Chemical Society, 2011)
The effects of plating baths of different composition on the micro- structure and corrosion stability of Zn-Co alloy coatings were studied. Zn-Co alloys with the same Co content were deposited from chloride plating baths ...
Influence of Parameters and Regimes of the Electrodeposition on Hardness of Copper Coatings
(MDPI, 2023)
Correlation among morphological, structural and hardness characteristics of electrodeposited
copper coatings is presented in this review paper. Cu coatings were produced applying constant galvanostatic (DC) and pulsating ...
Ternary Zn-Ni-Co alloy: anomalous codeposition and corrosion stability
(Serbian Chemical Society, 2015)
Electrochemically deposited Zn-Ni-Co alloys under various deposition conditions were investigated using atomic absorption spectroscopy for the determination of the chemical composition, atomic force microscopy for surface ...
Correlation between morphology and magnetic properties of electrochemically produced cobalt powder particles
(Serbian Chemical Society, 2015)
Cobalt 3D powder particles were successfully prepared by galvanostatic electrodeposition. The electrodeposited cobalt powders were characterized by X-ray diffraction (XRD) analysis, scanning electron microscopy (SEM), ...
Morphology, Structure and Mechanical Properties of Copper Coatings Electrodeposited by Pulsating Current (PC) Regime on Si(111)
(MDPI, 2020)
Copper electrodeposition on (111)-oriented Si substrate was performed by the pulsating current (PC) regime at various average current densities in the range of 15–70 mA·cm−2, obtained by varying either the frequency (30, ...