Претраживање
Приказ резултата 31-40 од 81
Characterization of electrodeposited powders of the system Ni-Mo-O
(Oxford : Pergamon-Elsevier Science Ltd, 2008)
The electrodeposition of the Ni-Mo-O alloy powders from ammonium chloride containing electrolytes for different Ni/Mo ions concentration ratios was investigated by the polarization measurements. The morphology, chemical ...
Ternary Zn-Ni-Co alloy: anomalous codeposition and corrosion stability
(Serbian Chemical Society, 2015)
Electrochemically deposited Zn-Ni-Co alloys under various deposition conditions were investigated using atomic absorption spectroscopy for the determination of the chemical composition, atomic force microscopy for surface ...
Correlation between morphology and magnetic properties of electrochemically produced cobalt powder particles
(Serbian Chemical Society, 2015)
Cobalt 3D powder particles were successfully prepared by galvanostatic electrodeposition. The electrodeposited cobalt powders were characterized by X-ray diffraction (XRD) analysis, scanning electron microscopy (SEM), ...
Hydrogen evolution on Ni/WC composite coatings
(Springer, 2006)
The catalytic activity for the hydrogen evolution reaction (HER) of Ni/WC composites obtained by electrochemical
deposition of nickel from a conventional Watt’s bath, using two different ways of depositing the WC particles, ...
Electrochemically deposited Ni+WC composite coatings obtained under constant and pulsating current regimes
(Netherlands : Kluwer Academic Publishers, 2004)
A series of Ni þ WC composite coatings were obtained by electrodeposition on a rotating disc electrode (RDE)
from a commercially available Watts bath containing additives for brightness and smoothing and insoluble ...
Correlation between crystal structure and morphology of potentiostatically electrodeposited silver dendritic nanostructures
(Elsevier, 2018)
Silver dendritic nanonstructures obtained by the potentiostatic electrolysis from different electrolytes at different overpotentials were characterized by the scanning electron microscopy (SEM) technique and X-ray diffraction ...
Morphology, Structure and Mechanical Properties of Copper Coatings Electrodeposited by Pulsating Current (PC) Regime on Si(111)
(MDPI, 2020)
Copper electrodeposition on (111)-oriented Si substrate was performed by the pulsating current (PC) regime at various average current densities in the range of 15–70 mA·cm−2, obtained by varying either the frequency (30, ...
Influence of the type of electrolyte on the morphological and crystallographic characteristics of lead powder particles / Uticaj tipa elektrolita na morfološke i kristalografske karakteristike praškastih čestica olova
(Serbian Chemical Society, 2013)
Lead electrodeposition processes from basic (nitrate) and complex (acetate) electrolytes were mutually compared by scanning electron microscopy and X-ray diffraction investigation of the produced powder particles. The shape ...
Fundamental aspects of lead electrodeposition processes: Nucleation and growth / Fundamentalni aspekti procesa elektrohemijskog taloženja olova - nukleacija i rast
(Belgrade, Serbia : Engineering Society for Corrosion, 2016)
In this comprehensive study, the processes of nucleation and growth of lead from electrolytes of various kind and compositions have been analyzed. The processes of Pb nucleation were examined by the analysis of potentiostatic ...
Estimation of the exchange current density and comparative analysis of morphology of electrochemically produced lead and zinc deposits
(Serbian Chemical Society, 2017)
The processes of lead and zinc electrodeposition from the very dilute electrolytes were compared by the analysis of polarization characteristics and by the scanning electron microscopic (SEM) analysis of the morphology of ...