Pretraživanje
Prikaz rezultata 21-30 od 49
Electrochemical deposition and characterization of Zn /Co alloys and corrosion protection by electrodeposited epoxy coating on Zn /Co alloy
(Elsevier, 2002)
Zn-Co alloys electrochemically deposited on steel under various deposition conditions were investigated. The influence of deposition current density, temperature and composition of deposition solution on the phase structure ...
Electrodeposition of silver powder by pulsating and reversing currents
(Springer Nature Switzerland AG 2020, 1991)
The effect of the shape of the current wave and frequency in silver deposition by pulsating and reversing currents on the morphology of powder particles were investigated. The possibility of obtaining particles with different ...
TiO2/SnO2 photocatalyst formed by plasma electrolytic oxidation
(Elsevier, 2017)
TiO2/SnO2 coatings are formed by plasma electrolytic oxidation of titanium substrate in supporting electrolyte (10 g/L Na3PO4 center dot 12H(2)O) with addition of various concentrations of SnO2 particles. Photocatalytic ...
The potentiostatic current transients and the role of local diffusion fields in formation of the 2D lead dendrites from the concentrated electrolyte
(Elsevier, 2015)
Electrodeposition of lead from the concentrated nitrate electrolyte in the potentiostatic regime of electrolysis has been investigated by the analysis of the potentiostatic current transients and scanning electron microscope ...
Electrodeposited AgPd alloy coatings as efficient catalysts for the ethanol oxidation reaction
(Oxford : Pergamon-Elsevier Science Ltd, 2018)
The Pd and three AgPd alloy layers (AgPd1, AgPd2 and AgPd3) were electrodeposited onto Au disc electrodes from the solution containing high concentration of chloride ions (>12 M). All coatings were investigated by scanning ...
Aluminium electrodeposition under novel conditions from AlCl3–urea deep eutectic solvent at room temperature
(Elsevier, 2020)
The electrodeposition of aluminium on glassy carbon and aluminium substrates from AlCl3–urea deep eutectic solvent (DES) system at near room temperatures was investigated, without additional purification of the chemicals ...
Protective properties of cataphoretic epoxy coating on aluminium alloy AA6060 modified with electrodeposited Ce-based coatings: Effect of post-treatment
(Elsevier Science Sa, Lausanne, 2015)
Ce-based conversion coatings (CeCCs) are a promising alternative to toxic chromate coatings on the metal substrates. In this work the CeCCs were electrodeposited on aluminium alloy AA6060 from aqueous solution of Ce(NO3)(3) ...
Synthesis and characterization of AgPd alloy coatings as beneficial catalysts for low temperature fuel cells application
(Elsevier, 2019)
The Ag, Pd and AgPd alloys of different morphologies and compositions were electrodeposited onto Au
and glassy carbon (GC) disc electrodes from the solution containing 0.001 M PdCl2 þ 0.04 M AgCl þ 0.1 M
HCl þ 12 M LiCl ...
Electrochemical Activity of Thin-Film Pd Catalysts Modified with Bi for Methanol and Ethanol Oxidation Reaction in Alkaline Solution
(ESG, 2020)
Thin-film Pd catalysts with low metal loadings (55 and 110 µg cm-2) were obtained by electrodeposition from a surfactant-free green electrolyte on glassy carbon (GC) electrode. Pd/GC catalysts were modified by addition of ...
Effect of parameters of pulsating current (PC) regimes on morphology of electrodeposited copper in hydrogen co-deposition range
(Serbian Chemical Society, Belgrade, 2010)
The most often employed electrolytes for the electrodeposition of copper are those based on aqueous solutions of sulfuric acid (H2SO4) and cupric sulfate (CuSO4). There is an ionic equilibrium of a lot of species in the ...