Претраживање
Приказ резултата 11-20 од 67
Catalytic activity of sulfuric acid on the morphology of electrochemically obtained copper powder / Katalitičko delovanje sumporne kiseline na morfologiju elektrohemijski dobijenog bakarnog praha
(Belgrade, Serbia : Engineering Society for Corrosion, 2015)
The subject of the research is influence of sulfuric acid on morphology of electrochemically obtained copper powder during galvanostatic electrolysis mode. In this paper electrodeposition of copper powder from sulphate ...
Influence of Parameters and Regimes of the Electrodeposition on Morphology and Structure of Tin Dendrites / Uticaj parametra i režima elektrohemijskog taloženja na morfologiju i strukturu dendrita kalaja
(Beograd : Serbian Society of Corrosion and Materials Protection UISKOZAM / Udruženje inženjera Srbije za koroziju i zaštitu materijala UISKOZAM, 2022)
Tin dendrites were synthesized via electrochemical route from the alkaline electrolyte applying both
potentiostatic and galvanostatic regimes of the electrodeposition. Various both cathodic potentials
and amounts of ...
Effect of temperature on the electrodeposition of disperse copper deposits / Uticaj temperature na elektrohemijsko taloženje disperznih taloga bakra
(Serbian Chemical Society, 2007)
The effect of temperature on the electrodeposition of copper at overpotentials belonging to the plateau of the limiting diffusion current density and higher was examined by the determination of the average current efficiency ...
Determination of the absolute hardness of electrolytically produced copper coatings by application of the Chicot-Lesage composite hardness model / Одређивање апсолутне тврдоће електролитички добијених превлака бакра применом Chicot-Lesage композитног модела тврдоће
(Belgrade : Serbian Chemical Society, 2022)
In this study, a novel procedure, based on application of the Chicot–Lesage (C–L) composite hardness model, was proposed for the determination of an absolute hardness of electrolytically produced copper coatings. The Cu ...
Hardness response and adhesion of thin copper films on alloy substrates
(Belgrade: ETRAN – Society for electronics, telecommunication, computing, automatics and nuclear engineering, 2017)
Microhardness test is the most commonly used
method for assessing the mechanical properties of thin films.This testing method uses controlled contact at a single point of an indenter and chosen material which induces the ...
Morphology and structure of bright electrodeposited metal coatings
(Soc Chemists Technologists Madeconia, Skopje, 2011)
The properties which determine whether the metal surface is mirror bright are precisely determined by scanning electron microscopy (SEM), atomic forces microscopy (AFM), scanning tunneling microscopy (STM) and reflectance ...
Comparative analysis of the polarization and morphological characteristics of electrochemically produced powder forms of the intermediate metals
(Macedonian Journal of Chemistry and Chemical Engineering, 2014)
The polarization and morphological characteristics of powder forms of the group of the intermediate metals were examined by the analysis of silver and copper electrodeposition processes at high overpotentials. The pine-like ...
Relationship between the kinetic parameters and morphology of electrochemically deposited lead
(Serbian Chemical Society, 2016)
The processes of lead electrodeposition from electrolytes of various concentrations of sodium nitrate as the supporting electrolyte have been examined by chronoamperometry and by the scanning electron microscopic (SEM) ...
Response Surface Methodology and Artificial Neural Network-Based Models for Predicting Roughness of Cu coatings
(Belgrade: ETRAN – Society for electronics, telecommunication, computing, automatics and nuclear angineering, 2020)
Copper coatings are produced on silicon wafer by electrodeposition (ED) in pulsating current (PC) regime. Electrodeposition was performed at various current density amplitudes in the range of 80−140 mA cm-2, frequency in ...
Al-Pd alloy formation by aluminium underpotential deposition onto palladium from chloroaluminate melt
(Belgrade : ESG, 2021)
The possibility of electrochemical underpotential deposition of aluminium onto palladium from equimolar AlCl3+NaCl melts at temperatures between 200 ° and 300 °C was investigated. Electrochemical techniques used were cyclic ...