Search
Now showing items 41-50 of 53
Electrochemical aspects of formation of dendrites / Elektrohemijski aspekti formiranja dendrita
(Belgrade, Serbia : Engineering Society for Corrosion, 2016)
The one of the main contributions of Belgrade Electrochemical School to the field of metal electrodeposition is investigation of a mechanism of formation and growth of the disperse deposits. Spongy-like, cauliflower-like, ...
Nucleation and early stages of growth of lead onto copper electrodes from dilute electrolytes
(Elsevier, 2016)
The processes of nucleation and growth of lead from the dilute electrolytes on copper substrates were investigated by chronoamperometry and by scanning electron microscopic (SEM) analysis of the deposits obtained in the ...
Influence of electrodeposition regime and Sn:Pd ratios in Sn-Pd electrocatalysts on ethanol oxidation reaction / Влијание на режимот на електродепозицијата и на односите на Sn:Pd во Sn-Pd-електрокатализаторите врз оксидацијата на етанолот
(Society of Chemists and Technologists of MacedoniaSs. Cyril and Methodius University in Skopje, 2023)
A series of bimetallic Sn-Pd catalysts were prepared by a template-free two step electrodeposition method. According to this method, Sn was electrodeposited firstly in potentiostatic or galvanostatic regime on Cu electrodes ...
Electrodeposition of cobalt powders with novel three-dimensional structure
(Metalurgija, 2011)
Novel three-dimensional cobalt powder structures were successfully prepared by electrodeposition. Electrodeposited cobalt powder was characterized by scanning electron microscopy (SEM) and light microscopy. It was possible ...
The electrochemical deposition and corrosion stability of Zn-Mn alloy coatings / Elektrohemijsko taloženje i koroziona stabilnost prevlaka Zn-Mn legura
(Belgrade, Serbia : Engineering Society for Corrosion, 2010)
The influence of the type of the deposition solution on the current efficiency during electrodeposition of Zn-Mn alloys was examined. The Zn-Mn alloys were deposited on steel from chloride, sulphate and pyrophosphate plating ...
Electrochemical study of Nd and Pr co-deposition onto Mo and W from molten oxyfluorides
(MDPI, 2021)
Electrodeposition processes of neodymium and praseodymium in molten NdF3 + PrF3 + LiF + 1 wt.%Pr6O11 + 1 wt.%Nd2O3 and NdF3 + PrF3 + LiF + 2 wt.%Pr6O11 + 2 wt.%Nd2O3 electrolytes at 1323 K were investigated. Cyclic ...
Magnetoresistance Controls Arboreous Bead-Dendritic Growth of Magnetic Electrodeposits: Experimental and Theoretical Results
(The Electrochemical Society, Inc., 2004)
The effect of magnetic fields applied on magnetic metals electrodeposition was examined. Nickel deposits obtained from a Watt solution with coumarin, at cathodic potentials of -1000, -1200, and -1300 mV/SCE, without and ...
Identification of intermetallic compounds in electrodeposited copper-cadmium alloys by electrochemical techniques
(Elsevier, 1989)
Anodic sweep voltammetry was used to identify different intermetallic compounds and assess their amount in copper-cadmium alloys. Four compounds are found in thin (1–8 μm) electroplated alloy films: CuCd3, Cu5Cd8, Cu4Cd3 ...
Phase-structure analysis of brass by anodic linear-sweep voltammetry
(Springer, 1992)
Anodic linear-sweep voltammetry (ALSV) was applied to electrodeposited alloy layers and to metallurgically obtained Cu−Zn alloys of different composition and structure. Metallurgically obtained samples covered the range ...
Characterization of electrochemically formed thin layers of binary alloys by linear sweep voltammetry
(Springer, 1988)
It has been demonstrated that linear sweep voltammetry can be used as anin situ technique for characterization of electrodeposited thin layers of binary alloys. The anodic dissolution characteristics of linear sweep ...