Претраживање
Приказ резултата 31-40 од 107
Cartographic conic projections and their appliance in national cartography / Kartografske konusne projekcije i njihova primena u državnoj kartografiji
(Serbian Geographical Society, 2011)
This paper is dedicated to the mapping of conic projections and their appliance in producing maps of our state cartography. So far they were often applied, and will be used precisely coned, polyconed and modified polyconed ...
Synergetic effect of additives on the hardness and adhesion of thin electrodeposited copper films
(Faculty of Technical Sciences in Cacak, 2017)
Thin copper films were electrodeposited on a polycrystalline cold-rolled copper substrate. The composition of the laboratory-made copper sulphate electrolyte was changed by the addition of various additives. The influence ...
Examination of phosphate ores bioleaching from Lisina deposit / Ispitivanje mogućnosti bioluženja fosfora iz fosfatne rude sa ležišta Lisina
(Belgrade, Serbia : Engineering Society for Corrosion, 2012)
Phosphorus solubilization from insoluble phosphate ores by acidophilic autotrophs and heterotrophs is a research of significant interest, because of potential use of these ores as fertilizers, which are economically and ...
Oscillators: Phenomenological mappings and analogies: Second part: Structural analogy and chains / Oscillateurs: Correspondance phénoménologiques et analogies: Deuxieme partie: Analogie structurale et les chaînes
(Belgrade, Serbia : Military Technical Institute, 2015)
New analytical and numerical results of dynamics for both linear and nonlinear system with two degrees of freedom are presented. For the mechanical chain system with two degrees of freedom, oscillations are investigated ...
Structural properties of Co, Ni and Mo powders obtained by electrochemical deposition
(Metalurgija, 2011)
Magnetic thin films based on iron group elements (Fe, Co, Ni) are currently used in computer's hard disk drives and in MEMS, whereas electrodeposition is a suitable method to obtain these materials. The powders of metals ...
Antitumour effect of a mixture of n-propyl polysulfides In vitro / Antitumorski efekti smeše n-propil polisulfida in vitro
(Serbian Journal of Experimental and Clinical Research, 2019)
Copper serves as a limiting factor for multiple steps of tumour progression, including angiogenesis, growth and metastasis. High levels of copper have been found in a wide spectrum of human cancers. Antitumour activities ...
Reationship between corrosion potential and diferent corrosion forms of metals, alloys and theirs welded joints: Part I / Veza izmenu korozionog potencijala i različitih vidova korozije metala, legura i njihovih zavarenih spojeva - deo I
(DUZS - Društvo za unapređivanje zavarivanja u Srbiji, Beograd, 2017)
This paper briefly describes the relationship between corrosion potential and different corrosion forms of metals and their welded joints. The nature of corrosion potential and the method of its measurement is also described. ...
Pitting corrosion testing of stainless steel AISI 304 in chloride solutions / Ispitivanje piting korozije nerđajućeg čelika AISI 304 u rastvorima hlorida
(DUZS - Društvo za unapređivanje zavarivanja u Srbiji, Beograd, 2015)
Stainless steels and their welded joints are often susceptible to pitting corrosion in solutions containing chloride ions. Testing of pitting corrosion of stainless steels is performed using chemical and electrochemical ...
Influence of welding current intensity on susceptibility to intergranular corrosion in welded joints of stainless steel / Uticaj jačine struje zavarivanja na sklonost prema interkristalnoj koroziji zavarenog spoja nerdajućeg čelika
(DUZS - Društvo za unapređivanje zavarivanja u Srbiji, Beograd, 2017)
Susceptibility to intergranular corrosion in welded joints of austenitic stainless steel X5Cr-Ni18-10 was tested. The welding was performed with different intensity of welding current (110 A, 130 A and 150 A). The tests ...
Testing of susceptibility to intergranular corrosion in welded joints of austenitic stainless steel / Određivanje sklonosti zavarenog spoja austenitnog nerđajućeg čelika prema interkristalnoj koroziji
(DUZS - Društvo za unapređivanje zavarivanja u Srbiji, Beograd, 2016)
The susceptibility to intergranular corrosion of welded joints of austenitic stainless steel X5CrNi18-10 was examined. The testing was performed by the electrochemical potentiokinetic reactivation method with single loop ...