COST Action - MP 0602

Link to this page

COST Action - MP 0602

Authors

Publications

Thermal, structural and electrical properties of some bi-cu-ni alloys

Markovic, B.; Živković, Dragana; Manasijević, Dragan; Sokic, M.; Minic, D.; Talijan, Nadežda M.; Stajić-Trošić, Jasna

(Polish Acad Sciences Committee Metallurgy, Krakow, 2014)

TY  - JOUR
AU  - Markovic, B.
AU  - Živković, Dragana
AU  - Manasijević, Dragan
AU  - Sokic, M.
AU  - Minic, D.
AU  - Talijan, Nadežda M.
AU  - Stajić-Trošić, Jasna
PY  - 2014
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/1514
AB  - The Bi-Cu-Ni ternary system belongs to the group of potential Cu-Ni-based advanced lead-free solder materials for high temperature application. In this study microstructure investigation of the slow-cooled Bi-Cu-Ni samples was done using SEM-EDS analysis. The samples compositions were chosen along three cross-sections with molar ratio Cu:Ni=1:3, 1:1 and 3:1. The experimentally obtained phase structure was compared with the results of thermodynamic calculation according to CALPHAD method. Also, new results regarding thermal and electrical properties investigations of these alloys are presented in this paper, based on DSC and electroconductivity measurements.
PB  - Polish Acad Sciences Committee Metallurgy, Krakow
T2  - Archives of Metallurgy and Materials
T1  - Thermal, structural and electrical properties of some bi-cu-ni alloys
VL  - 59
IS  - 1
SP  - 117
EP  - 120
DO  - 10.2478/amm-2014-0018
ER  - 
@article{
author = "Markovic, B. and Živković, Dragana and Manasijević, Dragan and Sokic, M. and Minic, D. and Talijan, Nadežda M. and Stajić-Trošić, Jasna",
year = "2014",
abstract = "The Bi-Cu-Ni ternary system belongs to the group of potential Cu-Ni-based advanced lead-free solder materials for high temperature application. In this study microstructure investigation of the slow-cooled Bi-Cu-Ni samples was done using SEM-EDS analysis. The samples compositions were chosen along three cross-sections with molar ratio Cu:Ni=1:3, 1:1 and 3:1. The experimentally obtained phase structure was compared with the results of thermodynamic calculation according to CALPHAD method. Also, new results regarding thermal and electrical properties investigations of these alloys are presented in this paper, based on DSC and electroconductivity measurements.",
publisher = "Polish Acad Sciences Committee Metallurgy, Krakow",
journal = "Archives of Metallurgy and Materials",
title = "Thermal, structural and electrical properties of some bi-cu-ni alloys",
volume = "59",
number = "1",
pages = "117-120",
doi = "10.2478/amm-2014-0018"
}
Markovic, B., Živković, D., Manasijević, D., Sokic, M., Minic, D., Talijan, N. M.,& Stajić-Trošić, J.. (2014). Thermal, structural and electrical properties of some bi-cu-ni alloys. in Archives of Metallurgy and Materials
Polish Acad Sciences Committee Metallurgy, Krakow., 59(1), 117-120.
https://doi.org/10.2478/amm-2014-0018
Markovic B, Živković D, Manasijević D, Sokic M, Minic D, Talijan NM, Stajić-Trošić J. Thermal, structural and electrical properties of some bi-cu-ni alloys. in Archives of Metallurgy and Materials. 2014;59(1):117-120.
doi:10.2478/amm-2014-0018 .
Markovic, B., Živković, Dragana, Manasijević, Dragan, Sokic, M., Minic, D., Talijan, Nadežda M., Stajić-Trošić, Jasna, "Thermal, structural and electrical properties of some bi-cu-ni alloys" in Archives of Metallurgy and Materials, 59, no. 1 (2014):117-120,
https://doi.org/10.2478/amm-2014-0018 . .
3
3
3