TY  - JOUR
AU  - Vorkapić, Miloš
AU  - Popović, Bogdan
AU  - Ćoćkalo, Dragan
AU  - Bakator, Mihalj
AU  - Stanisavljev, Sanja
PY  - 2023
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/6330
AB  - In this paper, a comparison of conventional and additive manufacturing was made. Lean and sustainable manufacturing from the point of view of waste were also analyzed. It was established that conventional manufacturing is slowly being replaced by additive manufacturing, but its role is still significant. Lean manufacturing indicates that waste is everywhere, i.e. at all organizational levels. Sustainable manufacturing analyzes new technologies and measures their impact on environmental protection with as little resource consumption as possible. The paper examined the importance of additive manufacturing in sustainable manufacturing by considering Lean principles. In conclusion, there is a flowchart of documents and activities that methodologically introduce additive manufacturing through respect for Lean principles and sustainable production. Savings in production time, launching new products, and quick replacement of parts have become imperative today, and further continuation of this work should be aimed at defining models and procedures in the company's sustainable development.
PB  - Zrenjanin, Serbia : University of Novi Sad, Technical faculty “Mihajlo Pupin” in Zrenjanin
T2  - Journal of Engineering Management and Competitiveness (JEMC)
T1  - The importance and link of additive manufacturing with lean and sustainable manufacturing
VL  - 13
IS  - 1
SP  - 53
EP  - 60
DO  - 10.5937/JEMC2301053V
ER  - 

@article{
author = "Vorkapić, Miloš and Popović, Bogdan and Ćoćkalo, Dragan and Bakator, Mihalj and Stanisavljev, Sanja",
year = "2023",
abstract = "In this paper, a comparison of conventional and additive manufacturing was made. Lean and sustainable manufacturing from the point of view of waste were also analyzed. It was established that conventional manufacturing is slowly being replaced by additive manufacturing, but its role is still significant. Lean manufacturing indicates that waste is everywhere, i.e. at all organizational levels. Sustainable manufacturing analyzes new technologies and measures their impact on environmental protection with as little resource consumption as possible. The paper examined the importance of additive manufacturing in sustainable manufacturing by considering Lean principles. In conclusion, there is a flowchart of documents and activities that methodologically introduce additive manufacturing through respect for Lean principles and sustainable production. Savings in production time, launching new products, and quick replacement of parts have become imperative today, and further continuation of this work should be aimed at defining models and procedures in the company's sustainable development.",
publisher = "Zrenjanin, Serbia : University of Novi Sad, Technical faculty “Mihajlo Pupin” in Zrenjanin",
journal = "Journal of Engineering Management and Competitiveness (JEMC)",
title = "The importance and link of additive manufacturing with lean and sustainable manufacturing",
volume = "13",
number = "1",
pages = "53-60",
doi = "10.5937/JEMC2301053V"
}

Vorkapić, M., Popović, B., Ćoćkalo, D., Bakator, M.,& Stanisavljev, S.. (2023). The importance and link of additive manufacturing with lean and sustainable manufacturing. in Journal of Engineering Management and Competitiveness (JEMC)
Zrenjanin, Serbia : University of Novi Sad, Technical faculty “Mihajlo Pupin” in Zrenjanin., 13(1), 53-60.
https://doi.org/10.5937/JEMC2301053V

Vorkapić M, Popović B, Ćoćkalo D, Bakator M, Stanisavljev S. The importance and link of additive manufacturing with lean and sustainable manufacturing. in Journal of Engineering Management and Competitiveness (JEMC). 2023;13(1):53-60.
doi:10.5937/JEMC2301053V .

Vorkapić, Miloš, Popović, Bogdan, Ćoćkalo, Dragan, Bakator, Mihalj, Stanisavljev, Sanja, "The importance and link of additive manufacturing with lean and sustainable manufacturing" in Journal of Engineering Management and Competitiveness (JEMC), 13, no. 1 (2023):53-60,
https://doi.org/10.5937/JEMC2301053V . .

TY  - CONF
AU  - Bakator, Mihalj
AU  - Đorđević, Dejan
AU  - Ćoćkalo, Dragan
AU  - Bešić, Cariša
AU  - Vorkapić, Miloš
PY  - 2021
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/5679
AB  - The globalization of markets, the fourth industrial revolution - Industry 4.0, and the post-pandemic business
paradigm affected not only domestic enterprises but enterprises around the world as well. Forecasts regarding
GDP growth, unemployment rates and competitiveness are provided and discussed by various organizations
(World Bank, European Central Bank, World Economic Forum etc.). Additionally, a large number of quarterly
reports on various metrics for almost every country are published. In this paper the existing data and reports
published by some of the noted organizations are analyzed. The goal is to provide a concise and informative
overview on potential domestic macro-economic trends, on national competitiveness and on the competitiveness
of domestic enterprises. The overview is conceptualized through discussing existing and potential economic
forecasts based on reports. The paper provides a solid basis for future research in the domain of domestic
economy and national competitiveness. The paper also provides suggestions and guidelines for improving the
competitiveness of domestic enterprises.
PB  - Zrenjanin : Technical Faculty "Mihajlo Pupin"
C3  - Proceedings - XI International Symposium Engineering Management and Competitiveness 2021 (EMC 2021), 18-19th June 2021, Zrenjanin, Serbia
T1  - Forecast for the domestic economy and national competitiveness
SP  - 195
EP  - 200
UR  - https://hdl.handle.net/21.15107/rcub_cer_5679
ER  - 

@conference{
author = "Bakator, Mihalj and Đorđević, Dejan and Ćoćkalo, Dragan and Bešić, Cariša and Vorkapić, Miloš",
year = "2021",
abstract = "The globalization of markets, the fourth industrial revolution - Industry 4.0, and the post-pandemic business
paradigm affected not only domestic enterprises but enterprises around the world as well. Forecasts regarding
GDP growth, unemployment rates and competitiveness are provided and discussed by various organizations
(World Bank, European Central Bank, World Economic Forum etc.). Additionally, a large number of quarterly
reports on various metrics for almost every country are published. In this paper the existing data and reports
published by some of the noted organizations are analyzed. The goal is to provide a concise and informative
overview on potential domestic macro-economic trends, on national competitiveness and on the competitiveness
of domestic enterprises. The overview is conceptualized through discussing existing and potential economic
forecasts based on reports. The paper provides a solid basis for future research in the domain of domestic
economy and national competitiveness. The paper also provides suggestions and guidelines for improving the
competitiveness of domestic enterprises.",
publisher = "Zrenjanin : Technical Faculty "Mihajlo Pupin"",
journal = "Proceedings - XI International Symposium Engineering Management and Competitiveness 2021 (EMC 2021), 18-19th June 2021, Zrenjanin, Serbia",
title = "Forecast for the domestic economy and national competitiveness",
pages = "195-200",
url = "https://hdl.handle.net/21.15107/rcub_cer_5679"
}

Bakator, M., Đorđević, D., Ćoćkalo, D., Bešić, C.,& Vorkapić, M.. (2021). Forecast for the domestic economy and national competitiveness. in Proceedings - XI International Symposium Engineering Management and Competitiveness 2021 (EMC 2021), 18-19th June 2021, Zrenjanin, Serbia
Zrenjanin : Technical Faculty "Mihajlo Pupin"., 195-200.
https://hdl.handle.net/21.15107/rcub_cer_5679

Bakator M, Đorđević D, Ćoćkalo D, Bešić C, Vorkapić M. Forecast for the domestic economy and national competitiveness. in Proceedings - XI International Symposium Engineering Management and Competitiveness 2021 (EMC 2021), 18-19th June 2021, Zrenjanin, Serbia. 2021;:195-200.
https://hdl.handle.net/21.15107/rcub_cer_5679 .

Bakator, Mihalj, Đorđević, Dejan, Ćoćkalo, Dragan, Bešić, Cariša, Vorkapić, Miloš, "Forecast for the domestic economy and national competitiveness" in Proceedings - XI International Symposium Engineering Management and Competitiveness 2021 (EMC 2021), 18-19th June 2021, Zrenjanin, Serbia (2021):195-200,
https://hdl.handle.net/21.15107/rcub_cer_5679 .

TY  - CONF
AU  - Ćoćkalo, Dragan
AU  - Bakator, Mihalj
AU  - Đorđević, Dejan
AU  - Stanisavljev, Sanja
AU  - Vorkapić, Miloš
PY  - 2021
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/4871
AB  - The globalization of markets affects how enterprises conduct business. In addition to the challenges of
the globalized market, enterprises have to adapt to changes that the coronavirus pandemic has brought to the
global business environment. In order for domestic enterprises to achieve competitiveness in such market
conditions, technological and industrial innovations are an imperative. In this paper the application of Industry
4.0 technologies is discussed and the potential of such technologies for improving competitiveness of domestic
enterprises is addressed. The paper provides a solid basis for future research in this domain.
PB  - Zrenjanin : Technical Faculty "Mihajlo Pupin"
C3  - XI International Conference Industrial Engineering and Environmental Protection 2021 (IIZS 2021) October 07-08, 2021, Zrenjanin, Serbia
T1  - Improving competitiveness through technological and industrial innovation
SP  - 258
EP  - 263
UR  - https://hdl.handle.net/21.15107/rcub_cer_4871
ER  - 

@conference{
author = "Ćoćkalo, Dragan and Bakator, Mihalj and Đorđević, Dejan and Stanisavljev, Sanja and Vorkapić, Miloš",
year = "2021",
abstract = "The globalization of markets affects how enterprises conduct business. In addition to the challenges of
the globalized market, enterprises have to adapt to changes that the coronavirus pandemic has brought to the
global business environment. In order for domestic enterprises to achieve competitiveness in such market
conditions, technological and industrial innovations are an imperative. In this paper the application of Industry
4.0 technologies is discussed and the potential of such technologies for improving competitiveness of domestic
enterprises is addressed. The paper provides a solid basis for future research in this domain.",
publisher = "Zrenjanin : Technical Faculty "Mihajlo Pupin"",
journal = "XI International Conference Industrial Engineering and Environmental Protection 2021 (IIZS 2021) October 07-08, 2021, Zrenjanin, Serbia",
title = "Improving competitiveness through technological and industrial innovation",
pages = "258-263",
url = "https://hdl.handle.net/21.15107/rcub_cer_4871"
}

Ćoćkalo, D., Bakator, M., Đorđević, D., Stanisavljev, S.,& Vorkapić, M.. (2021). Improving competitiveness through technological and industrial innovation. in XI International Conference Industrial Engineering and Environmental Protection 2021 (IIZS 2021) October 07-08, 2021, Zrenjanin, Serbia
Zrenjanin : Technical Faculty "Mihajlo Pupin"., 258-263.
https://hdl.handle.net/21.15107/rcub_cer_4871

Ćoćkalo D, Bakator M, Đorđević D, Stanisavljev S, Vorkapić M. Improving competitiveness through technological and industrial innovation. in XI International Conference Industrial Engineering and Environmental Protection 2021 (IIZS 2021) October 07-08, 2021, Zrenjanin, Serbia. 2021;:258-263.
https://hdl.handle.net/21.15107/rcub_cer_4871 .

Ćoćkalo, Dragan, Bakator, Mihalj, Đorđević, Dejan, Stanisavljev, Sanja, Vorkapić, Miloš, "Improving competitiveness through technological and industrial innovation" in XI International Conference Industrial Engineering and Environmental Protection 2021 (IIZS 2021) October 07-08, 2021, Zrenjanin, Serbia (2021):258-263,
https://hdl.handle.net/21.15107/rcub_cer_4871 .

TY  - JOUR
AU  - Ćoćkalo, Dragan
AU  - Vorkapić, Miloš
AU  - Kreculj, Dragan
AU  - Đorđević, Dejan
AU  - Frantlović, Miloš
PY  - 2020
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/3862
AB  - The analysis of a new product realization from the view of customer
requirements and a relevant technical response of a company is presented
in this paper. Two types of tools are used: QFD and AHP. HOQ within
QFD is used for modeling technical requirements on the basis of defined
customer demands. AHP serves as an addition in the process of technical
requirements definition, it is used as a strategy for fast response to
customer requirements. A comparison between leading foreign and
domestic producers of transmitters has also been presented. HOQ
realization on the example of intelligent pressure transmitter has shown
that design parameters were defined. The implementation of AHP
methodology has pointed at the significance of modular architecture for
transmitter realization. Original contribution of this work is reflected in
QFD analysis solutions – customer requirements were satisfied by giving
technical characteristics with the aim of a new product realization.
AB  - У овом раду представљена је анализа реализације
новог производа са аспекта потреба купаца и
релевантног техничког одговора компаније. Користе
се две врсте алата: QFD и АHP. HOQ у оквиру QFD
се користи за моделирање техничких захтева на
основу дефинисаних потреба клијената. AHP служи
као додатак у процесу дефинисања техничких
захтева, употребљава се као стратегија за брзо
реаговање на захтеве купаца. Такође је приказано
поређење водећих страних и домаћих произвођача
трансмитера. Реализација HOQ-а на примеру
интелигентног трансмитера притиска показала је да
су параметри дизајна дефинисани. Примена AHP
методологије указала је на значај модуларне
архитектуре за реализацију трансмитера.
Оригинални допринос овог рада огледа се у QFD
анализама - захтеви купаца су удовољени давањем
техничких карактеристика са циљем реализације
новог производа.
PB  - Serbia : University of Belgrade, Faculty of Mechanical Engineering
T2  - FME Transactions
T1  - Using QFD and AHP Tools in the Case of Industrial Transmitters Manufacturing
T1  - Кorišćenje QFD И AHP alata u slučaju proizvodnje industrijskih transmitera
IS  - 48
IS  - 1
SP  - 164
EP  - 172
DO  - 10.5937/fmet2001164C
ER  - 

@article{
author = "Ćoćkalo, Dragan and Vorkapić, Miloš and Kreculj, Dragan and Đorđević, Dejan and Frantlović, Miloš",
year = "2020",
abstract = "The analysis of a new product realization from the view of customer
requirements and a relevant technical response of a company is presented
in this paper. Two types of tools are used: QFD and AHP. HOQ within
QFD is used for modeling technical requirements on the basis of defined
customer demands. AHP serves as an addition in the process of technical
requirements definition, it is used as a strategy for fast response to
customer requirements. A comparison between leading foreign and
domestic producers of transmitters has also been presented. HOQ
realization on the example of intelligent pressure transmitter has shown
that design parameters were defined. The implementation of AHP
methodology has pointed at the significance of modular architecture for
transmitter realization. Original contribution of this work is reflected in
QFD analysis solutions – customer requirements were satisfied by giving
technical characteristics with the aim of a new product realization., У овом раду представљена је анализа реализације
новог производа са аспекта потреба купаца и
релевантног техничког одговора компаније. Користе
се две врсте алата: QFD и АHP. HOQ у оквиру QFD
се користи за моделирање техничких захтева на
основу дефинисаних потреба клијената. AHP служи
као додатак у процесу дефинисања техничких
захтева, употребљава се као стратегија за брзо
реаговање на захтеве купаца. Такође је приказано
поређење водећих страних и домаћих произвођача
трансмитера. Реализација HOQ-а на примеру
интелигентног трансмитера притиска показала је да
су параметри дизајна дефинисани. Примена AHP
методологије указала је на значај модуларне
архитектуре за реализацију трансмитера.
Оригинални допринос овог рада огледа се у QFD
анализама - захтеви купаца су удовољени давањем
техничких карактеристика са циљем реализације
новог производа.",
publisher = "Serbia : University of Belgrade, Faculty of Mechanical Engineering",
journal = "FME Transactions",
title = "Using QFD and AHP Tools in the Case of Industrial Transmitters Manufacturing, Кorišćenje QFD И AHP alata u slučaju proizvodnje industrijskih transmitera",
number = "48, 1",
pages = "164-172",
doi = "10.5937/fmet2001164C"
}

Ćoćkalo, D., Vorkapić, M., Kreculj, D., Đorđević, D.,& Frantlović, M.. (2020). Using QFD and AHP Tools in the Case of Industrial Transmitters Manufacturing. in FME Transactions
Serbia : University of Belgrade, Faculty of Mechanical Engineering.(48), 164-172.
https://doi.org/10.5937/fmet2001164C

Ćoćkalo D, Vorkapić M, Kreculj D, Đorđević D, Frantlović M. Using QFD and AHP Tools in the Case of Industrial Transmitters Manufacturing. in FME Transactions. 2020;(48):164-172.
doi:10.5937/fmet2001164C .

Ćoćkalo, Dragan, Vorkapić, Miloš, Kreculj, Dragan, Đorđević, Dejan, Frantlović, Miloš, "Using QFD and AHP Tools in the Case of Industrial Transmitters Manufacturing" in FME Transactions, no. 48 (2020):164-172,
https://doi.org/10.5937/fmet2001164C . .

TY  - CHAP
AU  - Đorđević, Dejan
AU  - Ćoćkalo, Dragan
AU  - Bakator, Mihalj
AU  - Bogetić, Srđan
AU  - Vorkapić, Miloš
AU  - Bešić, Cariša
PY  - 2020
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/3921
AB  - Amidst the globalization of markets and within the framework of the
fourth industrial revolution - Industry 4.0, domestic enterprises face challenges
when it comes to business and market performance. Domestic enterprises lack
necessary productivity and product quality in order to compete on the global
market. In this paper cloud computing solutions in various industries are analyzed.
The goal is to develop a cloud computing model for improving the
competitive ability of domestic enterprises. The model integrates several cloudbased
solutions and takes into consideration the business metrics of domestic
enterprises. Furthermore, future trends in cloud computing advances and its
application are discussed. The paper also presents suggestions and guidelines for
improving competitiveness of domestic enterprises through the application of
cloud computing solutions. The results of this study significantly contribute to
the existing body of literature and provide a solid basis for future research in the
domain of cloud computing application in industries in developing countries.
PB  - Springer
T2  - Lecture Notes in Mechanical Engineering - Proceedings of 5th International Conferenceon the Industry 4.0 Model for Advanced Manufacturing
T1  - A cloud computing model for achieving competitiveness of domestic enterprises
SP  - 239
EP  - 249
DO  - 10.1007/978-3-030-46212-3_17
ER  - 

@inbook{
author = "Đorđević, Dejan and Ćoćkalo, Dragan and Bakator, Mihalj and Bogetić, Srđan and Vorkapić, Miloš and Bešić, Cariša",
year = "2020",
abstract = "Amidst the globalization of markets and within the framework of the
fourth industrial revolution - Industry 4.0, domestic enterprises face challenges
when it comes to business and market performance. Domestic enterprises lack
necessary productivity and product quality in order to compete on the global
market. In this paper cloud computing solutions in various industries are analyzed.
The goal is to develop a cloud computing model for improving the
competitive ability of domestic enterprises. The model integrates several cloudbased
solutions and takes into consideration the business metrics of domestic
enterprises. Furthermore, future trends in cloud computing advances and its
application are discussed. The paper also presents suggestions and guidelines for
improving competitiveness of domestic enterprises through the application of
cloud computing solutions. The results of this study significantly contribute to
the existing body of literature and provide a solid basis for future research in the
domain of cloud computing application in industries in developing countries.",
publisher = "Springer",
journal = "Lecture Notes in Mechanical Engineering - Proceedings of 5th International Conferenceon the Industry 4.0 Model for Advanced Manufacturing",
booktitle = "A cloud computing model for achieving competitiveness of domestic enterprises",
pages = "239-249",
doi = "10.1007/978-3-030-46212-3_17"
}

Đorđević, D., Ćoćkalo, D., Bakator, M., Bogetić, S., Vorkapić, M.,& Bešić, C.. (2020). A cloud computing model for achieving competitiveness of domestic enterprises. in Lecture Notes in Mechanical Engineering - Proceedings of 5th International Conferenceon the Industry 4.0 Model for Advanced Manufacturing
Springer., 239-249.
https://doi.org/10.1007/978-3-030-46212-3_17

Đorđević D, Ćoćkalo D, Bakator M, Bogetić S, Vorkapić M, Bešić C. A cloud computing model for achieving competitiveness of domestic enterprises. in Lecture Notes in Mechanical Engineering - Proceedings of 5th International Conferenceon the Industry 4.0 Model for Advanced Manufacturing. 2020;:239-249.
doi:10.1007/978-3-030-46212-3_17 .

Đorđević, Dejan, Ćoćkalo, Dragan, Bakator, Mihalj, Bogetić, Srđan, Vorkapić, Miloš, Bešić, Cariša, "A cloud computing model for achieving competitiveness of domestic enterprises" in Lecture Notes in Mechanical Engineering - Proceedings of 5th International Conferenceon the Industry 4.0 Model for Advanced Manufacturing (2020):239-249,
https://doi.org/10.1007/978-3-030-46212-3_17 . .

TY  - JOUR
AU  - Vorkapić, Miloš
AU  - Ćoćkalo, Dragan
AU  - Spasojević-Brkić, Vesna
AU  - Đorđević, Dejan
AU  - Brkić, Aleksandar
PY  - 2019
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/3357
AB  - Gap analysis represents a tool for raising the level of performances of products, processes and enterprise organization which is rarely used in risk management. This paper proposes the joint application of Gap and Pareto analysis, in aim to mitigate possible risks in production processes. It is based on the facts that key points in the production process indicate some serious oversights (gaps), characterized as errors, which can grow into risky elements that disturb the manufacturing process and final transmitter assembly. In this paper, finalizing and assembling pressure transmitter elements (modules), created by a domestic manufacturer, served as an example for the Gap analysis. Each electronic transmitter is consisted of three modules: measurement cell, mechanical coupling fixture and enclosure containing the electronics and the terminal block box. Through the implementation and assembly of these modules errors (or elements of potential risks) have been identified. Later on, using the Pareto chart, it has been seen that 80% of errors made during the transmitter manufacturing process have occurred while implementing the first and the third transmitter module. Also, by analyzing the collected gaps, it has been concluded that the critical ones happen while using the existing technology and engaging workforce. In order to eliminate the above-mentioned errors, this paper decidedly presents the Gap analysis steps which should be followed, so the transmitter manufacturing process would be improved in terms of quality. Similar methodology could be applied to other products and processes.
PB  - Belgrade : Institute for research and design in industry
T2  - Journal of Applied Engineering Science
T1  - Gap analysis and risk occurrence on the example of pressure transmitter`s production processes
VL  - 17
IS  - 4
SP  - 590
EP  - 598
DO  - 10.5937/jaes17-23443
ER  - 

@article{
author = "Vorkapić, Miloš and Ćoćkalo, Dragan and Spasojević-Brkić, Vesna and Đorđević, Dejan and Brkić, Aleksandar",
year = "2019",
abstract = "Gap analysis represents a tool for raising the level of performances of products, processes and enterprise organization which is rarely used in risk management. This paper proposes the joint application of Gap and Pareto analysis, in aim to mitigate possible risks in production processes. It is based on the facts that key points in the production process indicate some serious oversights (gaps), characterized as errors, which can grow into risky elements that disturb the manufacturing process and final transmitter assembly. In this paper, finalizing and assembling pressure transmitter elements (modules), created by a domestic manufacturer, served as an example for the Gap analysis. Each electronic transmitter is consisted of three modules: measurement cell, mechanical coupling fixture and enclosure containing the electronics and the terminal block box. Through the implementation and assembly of these modules errors (or elements of potential risks) have been identified. Later on, using the Pareto chart, it has been seen that 80% of errors made during the transmitter manufacturing process have occurred while implementing the first and the third transmitter module. Also, by analyzing the collected gaps, it has been concluded that the critical ones happen while using the existing technology and engaging workforce. In order to eliminate the above-mentioned errors, this paper decidedly presents the Gap analysis steps which should be followed, so the transmitter manufacturing process would be improved in terms of quality. Similar methodology could be applied to other products and processes.",
publisher = "Belgrade : Institute for research and design in industry",
journal = "Journal of Applied Engineering Science",
title = "Gap analysis and risk occurrence on the example of pressure transmitter`s production processes",
volume = "17",
number = "4",
pages = "590-598",
doi = "10.5937/jaes17-23443"
}

Vorkapić, M., Ćoćkalo, D., Spasojević-Brkić, V., Đorđević, D.,& Brkić, A.. (2019). Gap analysis and risk occurrence on the example of pressure transmitter`s production processes. in Journal of Applied Engineering Science
Belgrade : Institute for research and design in industry., 17(4), 590-598.
https://doi.org/10.5937/jaes17-23443

Vorkapić M, Ćoćkalo D, Spasojević-Brkić V, Đorđević D, Brkić A. Gap analysis and risk occurrence on the example of pressure transmitter`s production processes. in Journal of Applied Engineering Science. 2019;17(4):590-598.
doi:10.5937/jaes17-23443 .

Vorkapić, Miloš, Ćoćkalo, Dragan, Spasojević-Brkić, Vesna, Đorđević, Dejan, Brkić, Aleksandar, "Gap analysis and risk occurrence on the example of pressure transmitter`s production processes" in Journal of Applied Engineering Science, 17, no. 4 (2019):590-598,
https://doi.org/10.5937/jaes17-23443 . .

TY  - CONF
AU  - Bakator, Mihalj
AU  - Đorđević, Dejan
AU  - Vorkapić, Miloš
AU  - Ćeha, Milenko
PY  - 2019
UR  - http://www.tfzr.uns.ac.rs/emc/proceedings/EMC%202019%20Proceedings.pdf
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/3912
AB  - The lean manufacturing approach has the potential to lower production costs and increase productivity through the reduction of various forms of waste. It is evident that lean manufacturing as a business model offers stable financial performance and overall good business performance. The fourth industrial revolution or Industry 4.0 (I4.0) includes the use of evolving technologies such as cloud computing, blockchain technologies, Internet of Things, big data analysis, additive manufacturing, simulation and others. In this paper a thorough analysis of literature is conducted. Based on the findings, a theoretical model for I4.0 technologies application with lean manufacturing is developed. The model depicts an enterprise and the possible solutions for improving business performance with I4.0 technologies and lean manufacturing. The main goal of this paper is to challenge the idea of I4.0 application with the lean approach in order to achieve higher competitiveness. I4.0 technologies often require expensive infrastructure and extensive financial investments, but including lean into the “equation” it is possible to “reap” the benefits of these technologies at a lower cost. The limitations of the model are addressed and future research is proposed.
PB  - Zrenjanin, Serbia : University of Novi Sad, Technical Faculty "Mihajlo Pupin"
C3  - Proceedings - IX International Symposium Engineering Management and Competitiveness 2019 (EMC 2019)
T1  - Modelling the use of Industry 4.0 technologies with lean manufacturing
SP  - 41
EP  - 46
UR  - https://hdl.handle.net/21.15107/rcub_cer_3912
ER  - 

@conference{
author = "Bakator, Mihalj and Đorđević, Dejan and Vorkapić, Miloš and Ćeha, Milenko",
year = "2019",
abstract = "The lean manufacturing approach has the potential to lower production costs and increase productivity through the reduction of various forms of waste. It is evident that lean manufacturing as a business model offers stable financial performance and overall good business performance. The fourth industrial revolution or Industry 4.0 (I4.0) includes the use of evolving technologies such as cloud computing, blockchain technologies, Internet of Things, big data analysis, additive manufacturing, simulation and others. In this paper a thorough analysis of literature is conducted. Based on the findings, a theoretical model for I4.0 technologies application with lean manufacturing is developed. The model depicts an enterprise and the possible solutions for improving business performance with I4.0 technologies and lean manufacturing. The main goal of this paper is to challenge the idea of I4.0 application with the lean approach in order to achieve higher competitiveness. I4.0 technologies often require expensive infrastructure and extensive financial investments, but including lean into the “equation” it is possible to “reap” the benefits of these technologies at a lower cost. The limitations of the model are addressed and future research is proposed.",
publisher = "Zrenjanin, Serbia : University of Novi Sad, Technical Faculty "Mihajlo Pupin"",
journal = "Proceedings - IX International Symposium Engineering Management and Competitiveness 2019 (EMC 2019)",
title = "Modelling the use of Industry 4.0 technologies with lean manufacturing",
pages = "41-46",
url = "https://hdl.handle.net/21.15107/rcub_cer_3912"
}

Bakator, M., Đorđević, D., Vorkapić, M.,& Ćeha, M.. (2019). Modelling the use of Industry 4.0 technologies with lean manufacturing. in Proceedings - IX International Symposium Engineering Management and Competitiveness 2019 (EMC 2019)
Zrenjanin, Serbia : University of Novi Sad, Technical Faculty "Mihajlo Pupin"., 41-46.
https://hdl.handle.net/21.15107/rcub_cer_3912

Bakator M, Đorđević D, Vorkapić M, Ćeha M. Modelling the use of Industry 4.0 technologies with lean manufacturing. in Proceedings - IX International Symposium Engineering Management and Competitiveness 2019 (EMC 2019). 2019;:41-46.
https://hdl.handle.net/21.15107/rcub_cer_3912 .

Bakator, Mihalj, Đorđević, Dejan, Vorkapić, Miloš, Ćeha, Milenko, "Modelling the use of Industry 4.0 technologies with lean manufacturing" in Proceedings - IX International Symposium Engineering Management and Competitiveness 2019 (EMC 2019) (2019):41-46,
https://hdl.handle.net/21.15107/rcub_cer_3912 .

TY  - CONF
AU  - Đorđević, Dejan
AU  - Perić, Bojan
AU  - Vorkapić, Miloš
AU  - Ćoćkalo, Dragan
PY  - 2018
UR  - http://ie.mas.bg.ac.rs/sie2018/
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/3910
AB  - By definition, the risk represents suspense in relation to the desired outcomes. According to that, this project includes the algorithm which with the help of the tool CAD/CAM provides step analysis in the process of projecting to realization of the finished product. As well, algorithm points out the possible risks when presenting element or finished product.
PB  - University of Belgrade, Faculty of Mechanical Engineering
C3  - Proceedings of 7th International Symposium on Industrial Engineering SIE 2018
T1  - CAD/CAM tools in risk analysis during designing process
SP  - 62
EP  - 65
UR  - https://hdl.handle.net/21.15107/rcub_cer_3910
ER  - 

@conference{
author = "Đorđević, Dejan and Perić, Bojan and Vorkapić, Miloš and Ćoćkalo, Dragan",
year = "2018",
abstract = "By definition, the risk represents suspense in relation to the desired outcomes. According to that, this project includes the algorithm which with the help of the tool CAD/CAM provides step analysis in the process of projecting to realization of the finished product. As well, algorithm points out the possible risks when presenting element or finished product.",
publisher = "University of Belgrade, Faculty of Mechanical Engineering",
journal = "Proceedings of 7th International Symposium on Industrial Engineering SIE 2018",
title = "CAD/CAM tools in risk analysis during designing process",
pages = "62-65",
url = "https://hdl.handle.net/21.15107/rcub_cer_3910"
}

Đorđević, D., Perić, B., Vorkapić, M.,& Ćoćkalo, D.. (2018). CAD/CAM tools in risk analysis during designing process. in Proceedings of 7th International Symposium on Industrial Engineering SIE 2018
University of Belgrade, Faculty of Mechanical Engineering., 62-65.
https://hdl.handle.net/21.15107/rcub_cer_3910

Đorđević D, Perić B, Vorkapić M, Ćoćkalo D. CAD/CAM tools in risk analysis during designing process. in Proceedings of 7th International Symposium on Industrial Engineering SIE 2018. 2018;:62-65.
https://hdl.handle.net/21.15107/rcub_cer_3910 .

Đorđević, Dejan, Perić, Bojan, Vorkapić, Miloš, Ćoćkalo, Dragan, "CAD/CAM tools in risk analysis during designing process" in Proceedings of 7th International Symposium on Industrial Engineering SIE 2018 (2018):62-65,
https://hdl.handle.net/21.15107/rcub_cer_3910 .

TY  - CONF
AU  - Ćoćkalo, Dragan
AU  - Bakator, Mihalj
AU  - Đorđević, Dejan
AU  - Vorkapić, Miloš
PY  - 2018
UR  - http://ie.mas.bg.ac.rs/sie2018/
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/3911
AB  - In this systematic review the impact of ISO 9001 certification on business performance is addressed. A total of thirty (n=30) scientific articles in the domain of ISO 9001 certification are thoroughly analysed. The sum of samples of each analysed article is 9280. The findings indicate that almost half of the total sample size reported positive impact of certification. It is evident that ISO 9001 positively affects business performance. This paper can be used for further research as it provides a concise review on the effectiveness of quality management systems.
PB  - University of Belgrade, Faculty of Mechanical Engineering
C3  - Proceedings of 7th International Symposium on Industrial Engineering SIE 2018
T1  - A systematic literature rewiew in the domain of ISO 9001 certification and business improvement
SP  - 16
EP  - 19
UR  - https://hdl.handle.net/21.15107/rcub_cer_3911
ER  - 

@conference{
author = "Ćoćkalo, Dragan and Bakator, Mihalj and Đorđević, Dejan and Vorkapić, Miloš",
year = "2018",
abstract = "In this systematic review the impact of ISO 9001 certification on business performance is addressed. A total of thirty (n=30) scientific articles in the domain of ISO 9001 certification are thoroughly analysed. The sum of samples of each analysed article is 9280. The findings indicate that almost half of the total sample size reported positive impact of certification. It is evident that ISO 9001 positively affects business performance. This paper can be used for further research as it provides a concise review on the effectiveness of quality management systems.",
publisher = "University of Belgrade, Faculty of Mechanical Engineering",
journal = "Proceedings of 7th International Symposium on Industrial Engineering SIE 2018",
title = "A systematic literature rewiew in the domain of ISO 9001 certification and business improvement",
pages = "16-19",
url = "https://hdl.handle.net/21.15107/rcub_cer_3911"
}

Ćoćkalo, D., Bakator, M., Đorđević, D.,& Vorkapić, M.. (2018). A systematic literature rewiew in the domain of ISO 9001 certification and business improvement. in Proceedings of 7th International Symposium on Industrial Engineering SIE 2018
University of Belgrade, Faculty of Mechanical Engineering., 16-19.
https://hdl.handle.net/21.15107/rcub_cer_3911

Ćoćkalo D, Bakator M, Đorđević D, Vorkapić M. A systematic literature rewiew in the domain of ISO 9001 certification and business improvement. in Proceedings of 7th International Symposium on Industrial Engineering SIE 2018. 2018;:16-19.
https://hdl.handle.net/21.15107/rcub_cer_3911 .

Ćoćkalo, Dragan, Bakator, Mihalj, Đorđević, Dejan, Vorkapić, Miloš, "A systematic literature rewiew in the domain of ISO 9001 certification and business improvement" in Proceedings of 7th International Symposium on Industrial Engineering SIE 2018 (2018):16-19,
https://hdl.handle.net/21.15107/rcub_cer_3911 .

TY  - JOUR
AU  - Vorkapić, Miloš
AU  - Minić, Siniša, G.
AU  - Popović, Bogdan
PY  - 2018
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/3916
AB  - An overview of the application of QFD tools through the application of modular architecture in the new
product realization is presented in this paper. The QFD application can be considered as an engineering method in
the analysis of the buyer's desires and business opportunities in business excellence. The application of modular
architecture in product design provides the realization of new and diverse products suitable for re-use as well as for
materials recycling. From this point of view, we have tried to explain the significance of the new Lean philosophy
from the aspect of re-use of products, reduction of waste and employees’ efficiency increase. In this regard, the QFD
tool represents the link between design and production process improvement.
PB  - UASQ - United Association for Quality of Serbia, Belgrade, Serbia
T2  - International Journal of Advanced Quality
T1  - QFD tools efficiency in business excellence related to small-scale production
VL  - 46
IS  - 1
SP  - 27
EP  - 30
DO  - 10.25137/IJAQ.n1.v46.y2018.p27-31
ER  - 

@article{
author = "Vorkapić, Miloš and Minić, Siniša, G. and Popović, Bogdan",
year = "2018",
abstract = "An overview of the application of QFD tools through the application of modular architecture in the new
product realization is presented in this paper. The QFD application can be considered as an engineering method in
the analysis of the buyer's desires and business opportunities in business excellence. The application of modular
architecture in product design provides the realization of new and diverse products suitable for re-use as well as for
materials recycling. From this point of view, we have tried to explain the significance of the new Lean philosophy
from the aspect of re-use of products, reduction of waste and employees’ efficiency increase. In this regard, the QFD
tool represents the link between design and production process improvement.",
publisher = "UASQ - United Association for Quality of Serbia, Belgrade, Serbia",
journal = "International Journal of Advanced Quality",
title = "QFD tools efficiency in business excellence related to small-scale production",
volume = "46",
number = "1",
pages = "27-30",
doi = "10.25137/IJAQ.n1.v46.y2018.p27-31"
}

Vorkapić, M., Minić, S. G.,& Popović, B.. (2018). QFD tools efficiency in business excellence related to small-scale production. in International Journal of Advanced Quality
UASQ - United Association for Quality of Serbia, Belgrade, Serbia., 46(1), 27-30.
https://doi.org/10.25137/IJAQ.n1.v46.y2018.p27-31

Vorkapić M, Minić SG, Popović B. QFD tools efficiency in business excellence related to small-scale production. in International Journal of Advanced Quality. 2018;46(1):27-30.
doi:10.25137/IJAQ.n1.v46.y2018.p27-31 .

Vorkapić, Miloš, Minić, Siniša, G., Popović, Bogdan, "QFD tools efficiency in business excellence related to small-scale production" in International Journal of Advanced Quality, 46, no. 1 (2018):27-30,
https://doi.org/10.25137/IJAQ.n1.v46.y2018.p27-31 . .

TY  - CONF
AU  - Ćoćkalo, Dragan
AU  - Vorkapić, Miloš
AU  - Bogetić, Srđan
PY  - 2018
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/3905
AB  - The significance of Lean production and modular architecture in sustainable enterprise development is presented
in this paper. The implementation of Lean production in realization of modular design enables a development of
an appropriate production programme in which design costs are lower and reduction of waste during processing
is becoming an imperative. On the example of intelligent transmitters production it was shown that modular
architecture enables the production of independent entities, realizes modules according to precisely defined
technical documentation and makes possible easy servicing, improvements and fixing. The implementation of
Lean concept algorithm in a repeated use of materials in a sustainable enterprise development is presented as
well.
PB  - University of Novi Sad, Technical faculty “Mihajlo Pupin”, Zrenjanin, Republic of Serbia
C3  - VIII International Symposium Engineering Management and Competitiveness 2018 (EMC 2018), June 22-23, 2018, Zrenjanin, Serbia
T1  - Lean production and efficiency of modular architecture in sustainable enterprise development
SP  - 83
EP  - 88
UR  - https://hdl.handle.net/21.15107/rcub_cer_3905
ER  - 

@conference{
author = "Ćoćkalo, Dragan and Vorkapić, Miloš and Bogetić, Srđan",
year = "2018",
abstract = "The significance of Lean production and modular architecture in sustainable enterprise development is presented
in this paper. The implementation of Lean production in realization of modular design enables a development of
an appropriate production programme in which design costs are lower and reduction of waste during processing
is becoming an imperative. On the example of intelligent transmitters production it was shown that modular
architecture enables the production of independent entities, realizes modules according to precisely defined
technical documentation and makes possible easy servicing, improvements and fixing. The implementation of
Lean concept algorithm in a repeated use of materials in a sustainable enterprise development is presented as
well.",
publisher = "University of Novi Sad, Technical faculty “Mihajlo Pupin”, Zrenjanin, Republic of Serbia",
journal = "VIII International Symposium Engineering Management and Competitiveness 2018 (EMC 2018), June 22-23, 2018, Zrenjanin, Serbia",
title = "Lean production and efficiency of modular architecture in sustainable enterprise development",
pages = "83-88",
url = "https://hdl.handle.net/21.15107/rcub_cer_3905"
}

Ćoćkalo, D., Vorkapić, M.,& Bogetić, S.. (2018). Lean production and efficiency of modular architecture in sustainable enterprise development. in VIII International Symposium Engineering Management and Competitiveness 2018 (EMC 2018), June 22-23, 2018, Zrenjanin, Serbia
University of Novi Sad, Technical faculty “Mihajlo Pupin”, Zrenjanin, Republic of Serbia., 83-88.
https://hdl.handle.net/21.15107/rcub_cer_3905

Ćoćkalo D, Vorkapić M, Bogetić S. Lean production and efficiency of modular architecture in sustainable enterprise development. in VIII International Symposium Engineering Management and Competitiveness 2018 (EMC 2018), June 22-23, 2018, Zrenjanin, Serbia. 2018;:83-88.
https://hdl.handle.net/21.15107/rcub_cer_3905 .

Ćoćkalo, Dragan, Vorkapić, Miloš, Bogetić, Srđan, "Lean production and efficiency of modular architecture in sustainable enterprise development" in VIII International Symposium Engineering Management and Competitiveness 2018 (EMC 2018), June 22-23, 2018, Zrenjanin, Serbia (2018):83-88,
https://hdl.handle.net/21.15107/rcub_cer_3905 .

TY  - JOUR
AU  - Vorkapić, Miloš
AU  - Ćoćkalo, Dragan
AU  - Sajfert, Dragana
AU  - Đorđević, Dejan
AU  - Cvijanović, Strahinja
PY  - 2017
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/2068
AB  - The paper presents a theoretic model for improving the manufacturing process that was developed and tested in small-scale production enterprises. The model also represents a new organizational model which enables a complete implementation of pull strategy, insufficiently used in Serbia up to now, with a stress on sustainable manufacturing process, remanufacturing process and environmental protection. The model also includes the guidelines to SMEs - how to use energy, materials and water rationally during the process of manufacturing new products. Development of new products in SMEs on the territory of the Republic of Serbia is burdened by numerous problems among which the most influential ones are: financial flow, poor market estimation, lack of knowledge, lack of ISO 9001 certificate and weak organizational structure. On the bases of the data research we have identified the following problems in small enterprises: individual knowledge, distribution and realization of work tasks, increase of operational expenses caused by bad distribution of work tasks, exceptionally poor communication with consumers.
AB  - U radu je prikazan teoretski model za poboljšanje procesa proizvodnje koji je razvijen i testiran u malim proizvodnim preduzećima. Takođe, model predstavlja nov organizacioni model koji omogućava potpunu primenu pull strategije koje nije dovoljno zastupljena u Srbiji, a sa osvrtom na održivi proces proizvodnje proces ponovne proizvodnje, i sve zastupljeniji aspekt zaštite životne sredine. U modelu su dete smernice o tome kako da SMEs racionalno troše energiju, materijale, vodu i enrgiju u procesu proizvodnje novog proizvoda. Razvoj novih proizvoda u SMEs na teritoriji Republike Srbije prate mnogi problemi, a među najuticajnijim su: finansijski tokovi, loša procena tržišta, znanje nedostatak ISO 9001 sertifikata i slaba organizaciona struktura. Na osnovu podataka iz istraživanja, identifikovani su sledeći problemi u malim preduzećima: znanja pojedinaca, distribucija i realizacija poslovnih zadataka, porast operativnih troškova zbog loše podele poslova, izrazito loše komunikacije sa potrošačima.
PB  - Economics institute, Belgrade
T2  - Industrija
T1  - The model for improving the manufacturing process in Serbian small-scale production enterprises
T1  - Model za unapređenje procesa proizvodnje u srpskim preduzećima sa maloserijskim tipom proizvodnje
VL  - 45
IS  - 1
SP  - 7
EP  - 24
DO  - 10.5937/industrija45-10089
ER  - 

@article{
author = "Vorkapić, Miloš and Ćoćkalo, Dragan and Sajfert, Dragana and Đorđević, Dejan and Cvijanović, Strahinja",
year = "2017",
abstract = "The paper presents a theoretic model for improving the manufacturing process that was developed and tested in small-scale production enterprises. The model also represents a new organizational model which enables a complete implementation of pull strategy, insufficiently used in Serbia up to now, with a stress on sustainable manufacturing process, remanufacturing process and environmental protection. The model also includes the guidelines to SMEs - how to use energy, materials and water rationally during the process of manufacturing new products. Development of new products in SMEs on the territory of the Republic of Serbia is burdened by numerous problems among which the most influential ones are: financial flow, poor market estimation, lack of knowledge, lack of ISO 9001 certificate and weak organizational structure. On the bases of the data research we have identified the following problems in small enterprises: individual knowledge, distribution and realization of work tasks, increase of operational expenses caused by bad distribution of work tasks, exceptionally poor communication with consumers., U radu je prikazan teoretski model za poboljšanje procesa proizvodnje koji je razvijen i testiran u malim proizvodnim preduzećima. Takođe, model predstavlja nov organizacioni model koji omogućava potpunu primenu pull strategije koje nije dovoljno zastupljena u Srbiji, a sa osvrtom na održivi proces proizvodnje proces ponovne proizvodnje, i sve zastupljeniji aspekt zaštite životne sredine. U modelu su dete smernice o tome kako da SMEs racionalno troše energiju, materijale, vodu i enrgiju u procesu proizvodnje novog proizvoda. Razvoj novih proizvoda u SMEs na teritoriji Republike Srbije prate mnogi problemi, a među najuticajnijim su: finansijski tokovi, loša procena tržišta, znanje nedostatak ISO 9001 sertifikata i slaba organizaciona struktura. Na osnovu podataka iz istraživanja, identifikovani su sledeći problemi u malim preduzećima: znanja pojedinaca, distribucija i realizacija poslovnih zadataka, porast operativnih troškova zbog loše podele poslova, izrazito loše komunikacije sa potrošačima.",
publisher = "Economics institute, Belgrade",
journal = "Industrija",
title = "The model for improving the manufacturing process in Serbian small-scale production enterprises, Model za unapređenje procesa proizvodnje u srpskim preduzećima sa maloserijskim tipom proizvodnje",
volume = "45",
number = "1",
pages = "7-24",
doi = "10.5937/industrija45-10089"
}

Vorkapić, M., Ćoćkalo, D., Sajfert, D., Đorđević, D.,& Cvijanović, S.. (2017). The model for improving the manufacturing process in Serbian small-scale production enterprises. in Industrija
Economics institute, Belgrade., 45(1), 7-24.
https://doi.org/10.5937/industrija45-10089

Vorkapić M, Ćoćkalo D, Sajfert D, Đorđević D, Cvijanović S. The model for improving the manufacturing process in Serbian small-scale production enterprises. in Industrija. 2017;45(1):7-24.
doi:10.5937/industrija45-10089 .

Vorkapić, Miloš, Ćoćkalo, Dragan, Sajfert, Dragana, Đorđević, Dejan, Cvijanović, Strahinja, "The model for improving the manufacturing process in Serbian small-scale production enterprises" in Industrija, 45, no. 1 (2017):7-24,
https://doi.org/10.5937/industrija45-10089 . .

TY  - JOUR
AU  - Vorkapić, Miloš
AU  - Ćoćkalo, Dragan
AU  - Đorđević, Dejan
AU  - Bešić, Cariša
PY  - 2017
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/2072
AB  - The paper deals with the analysis of elements which represent a starting point in implementation of a business process reengineering. We have used Lean tools through the analysis of 5S model in our research. On the example of finalization of the finished transmitter in IHMT-CMT production, 5S tools were implemented with a focus on Quality elements although the theory shows that BPR and TQM are two opposite activities in an enterprise. We wanted to distinguish the significance of employees’ self-discipline which helps the process of product finalization to develop in time and without waste and losses. In addition, the employees keep their work place clean, tidy and functional.
AB  - U ovom radu analizirani su elementi koji bi predstavljali polaznu osnovu za u primeni reinženjeringa poslovnih procesa. Kao polazna osnova upotrebljen je Lean alat kroz analizu 5S modela. Na primeru finalizacije izrade gotovog transmitera u proizvodnji IHMT-CMT-a ustavonljeni su i primenjeni 5S alati, ali sa zadrškom na elemente kvaliteta iako teorija ukazuje za su BPR i TQM dve suprotne aktivnosti u preduzeću. Suština rada je samodisciplina zaposlenih na radnom mestu, koja pomaže da se proces finalizacije proizvoda odvija pravovremeno, bez otpada i gubitaka i da zaposleni stalno održavaju radno mesto uredno, čisto i funkcionalno.
PB  - University of Novi Sad, Technical faculty Mihajlo Pupin, Zrenjanin
T2  - Journal of Engineering Management and Competitiveness (JEMC)
T1  - Implementation of 5S tools as a starting point in business process reengineering
T1  - Primena 5S alata kao polazne osnove u reinženjeringu poslovnih procesa
VL  - 7
IS  - 1
SP  - 44
EP  - 54
DO  - 10.5937/jemc1701044V
ER  - 

@article{
author = "Vorkapić, Miloš and Ćoćkalo, Dragan and Đorđević, Dejan and Bešić, Cariša",
year = "2017",
abstract = "The paper deals with the analysis of elements which represent a starting point in implementation of a business process reengineering. We have used Lean tools through the analysis of 5S model in our research. On the example of finalization of the finished transmitter in IHMT-CMT production, 5S tools were implemented with a focus on Quality elements although the theory shows that BPR and TQM are two opposite activities in an enterprise. We wanted to distinguish the significance of employees’ self-discipline which helps the process of product finalization to develop in time and without waste and losses. In addition, the employees keep their work place clean, tidy and functional., U ovom radu analizirani su elementi koji bi predstavljali polaznu osnovu za u primeni reinženjeringa poslovnih procesa. Kao polazna osnova upotrebljen je Lean alat kroz analizu 5S modela. Na primeru finalizacije izrade gotovog transmitera u proizvodnji IHMT-CMT-a ustavonljeni su i primenjeni 5S alati, ali sa zadrškom na elemente kvaliteta iako teorija ukazuje za su BPR i TQM dve suprotne aktivnosti u preduzeću. Suština rada je samodisciplina zaposlenih na radnom mestu, koja pomaže da se proces finalizacije proizvoda odvija pravovremeno, bez otpada i gubitaka i da zaposleni stalno održavaju radno mesto uredno, čisto i funkcionalno.",
publisher = "University of Novi Sad, Technical faculty Mihajlo Pupin, Zrenjanin",
journal = "Journal of Engineering Management and Competitiveness (JEMC)",
title = "Implementation of 5S tools as a starting point in business process reengineering, Primena 5S alata kao polazne osnove u reinženjeringu poslovnih procesa",
volume = "7",
number = "1",
pages = "44-54",
doi = "10.5937/jemc1701044V"
}

Vorkapić, M., Ćoćkalo, D., Đorđević, D.,& Bešić, C.. (2017). Implementation of 5S tools as a starting point in business process reengineering. in Journal of Engineering Management and Competitiveness (JEMC)
University of Novi Sad, Technical faculty Mihajlo Pupin, Zrenjanin., 7(1), 44-54.
https://doi.org/10.5937/jemc1701044V

Vorkapić M, Ćoćkalo D, Đorđević D, Bešić C. Implementation of 5S tools as a starting point in business process reengineering. in Journal of Engineering Management and Competitiveness (JEMC). 2017;7(1):44-54.
doi:10.5937/jemc1701044V .

Vorkapić, Miloš, Ćoćkalo, Dragan, Đorđević, Dejan, Bešić, Cariša, "Implementation of 5S tools as a starting point in business process reengineering" in Journal of Engineering Management and Competitiveness (JEMC), 7, no. 1 (2017):44-54,
https://doi.org/10.5937/jemc1701044V . .

TY  - THES
AU  - Vorkapić, Miloš
PY  - 2016
UR  - http://www.cris.uns.ac.rs/DownloadFileServlet/Disertacija145147443582452.pdf?controlNumber=(BISIS)99802&fileName=145147443582452.pdf&id=4798&source=NaRDuS&language=sr
UR  - http://www.cris.uns.ac.rs/record.jsf?recordId=99802&source=NaRDuS&language=sr
UR  - http://nardus.mpn.gov.rs/123456789/5534
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/2590
AB  - У овом раду приказан је модел за обезбеђење унапређења процеса производње у предузећима малосеријског типа производње на територији Републике Србије. Модел је тестиран у малосеријској производњи. Веродостојност модела се огледа кроз: дефинисање основних функција, дефинисање фактора окружења, значај ресурса, анализу улаза и излаза у процесу малосеријске производње. Модел даје решење за унапређење конкурентске способности домаћих предузећа при освајању и лансирању новог производа. Модел је применљив у предузећима на територији Републике Србије чије се пословање заснива на истом или сличном технолошком поступку. На основу података истраживања евидентирани су пробеми у предузећима са малосеријском производњом: знање појединаца, подела и реализација задатака, неусклађеност послова, трошкови операција, слаба комуникација са потрошачима, давање одложеног плаћања.
AB  - U ovom radu prikazan je model za obezbeđenje unapređenja procesa proizvodnje u preduzećima maloserijskog tipa proizvodnje na teritoriji Republike Srbije. Model je testiran u maloserijskoj proizvodnji. Verodostojnost modela se ogleda kroz: definisanje osnovnih funkcija, definisanje faktora okruženja, značaj resursa, analizu ulaza i izlaza u procesu maloserijske proizvodnje. Model daje rešenje za unapređenje konkurentske sposobnosti domaćih preduzeća pri osvajanju i lansiranju novog proizvoda. Model je primenljiv u preduzećima na teritoriji Republike Srbije čije se poslovanje zasniva na istom ili sličnom tehnološkom postupku. Na osnovu podataka istraživanja evidentirani su probemi u preduzećima sa maloserijskom proizvodnjom: znanje pojedinaca, podela i realizacija zadataka, neusklađenost poslova, troškovi operacija, slaba komunikacija sa potrošačima, davanje odloženog plaćanja.
AB  - This paper shows a model for improvement of manufacturing process in small-scale enterprises on the territory of Republic of Serbia. The model was tested on smallscale production. The validity of the model can be seen through: defining basic functions, defining environmental factors, importance of resources, analysis of input and output in the process of small-scale production. The model provides the solution for improvement of competitive ability of domestic enterprises in conquering and launching a new product. The model is applicable in enterprises on the territory of Republic of Serbia whose business is based on the same or similar technological procedure. Based on research data, problems in enterprises with smallscale production were evident: knowledge of individuals, distribution and realization of the project, mismatch of jobs, operational expenses, poor communication with consumers, granting differed payment.
PB  - Универзитет у Новом Саду, Технички факултет "Михајло Пупин",  Зрењанин
T2  - Универзитет у Новом Саду
T1  - Модел за обезбеђење унапређења процеса производње и лансирање новог производа у предузећима малосеријског типа производње на територији Републике Србије
T1  - Model za obezbeđenje unapređenja procesa proizvodnje i lansiranje novog proizvoda u preduzećima maloserijskog tipa proizvodnje na teritoriji Republike Srbije
T1  - The model for providing improvement of the manufacturing process andthe launch of new product in small-scale production enterprises on theterritory of the Republic of Serbia
UR  - https://hdl.handle.net/21.15107/rcub_nardus_5534
ER  - 

@phdthesis{
author = "Vorkapić, Miloš",
year = "2016",
abstract = "У овом раду приказан је модел за обезбеђење унапређења процеса производње у предузећима малосеријског типа производње на територији Републике Србије. Модел је тестиран у малосеријској производњи. Веродостојност модела се огледа кроз: дефинисање основних функција, дефинисање фактора окружења, значај ресурса, анализу улаза и излаза у процесу малосеријске производње. Модел даје решење за унапређење конкурентске способности домаћих предузећа при освајању и лансирању новог производа. Модел је применљив у предузећима на територији Републике Србије чије се пословање заснива на истом или сличном технолошком поступку. На основу података истраживања евидентирани су пробеми у предузећима са малосеријском производњом: знање појединаца, подела и реализација задатака, неусклађеност послова, трошкови операција, слаба комуникација са потрошачима, давање одложеног плаћања., U ovom radu prikazan je model za obezbeđenje unapređenja procesa proizvodnje u preduzećima maloserijskog tipa proizvodnje na teritoriji Republike Srbije. Model je testiran u maloserijskoj proizvodnji. Verodostojnost modela se ogleda kroz: definisanje osnovnih funkcija, definisanje faktora okruženja, značaj resursa, analizu ulaza i izlaza u procesu maloserijske proizvodnje. Model daje rešenje za unapređenje konkurentske sposobnosti domaćih preduzeća pri osvajanju i lansiranju novog proizvoda. Model je primenljiv u preduzećima na teritoriji Republike Srbije čije se poslovanje zasniva na istom ili sličnom tehnološkom postupku. Na osnovu podataka istraživanja evidentirani su probemi u preduzećima sa maloserijskom proizvodnjom: znanje pojedinaca, podela i realizacija zadataka, neusklađenost poslova, troškovi operacija, slaba komunikacija sa potrošačima, davanje odloženog plaćanja., This paper shows a model for improvement of manufacturing process in small-scale enterprises on the territory of Republic of Serbia. The model was tested on smallscale production. The validity of the model can be seen through: defining basic functions, defining environmental factors, importance of resources, analysis of input and output in the process of small-scale production. The model provides the solution for improvement of competitive ability of domestic enterprises in conquering and launching a new product. The model is applicable in enterprises on the territory of Republic of Serbia whose business is based on the same or similar technological procedure. Based on research data, problems in enterprises with smallscale production were evident: knowledge of individuals, distribution and realization of the project, mismatch of jobs, operational expenses, poor communication with consumers, granting differed payment.",
publisher = "Универзитет у Новом Саду, Технички факултет "Михајло Пупин",  Зрењанин",
journal = "Универзитет у Новом Саду",
title = "Модел за обезбеђење унапређења процеса производње и лансирање новог производа у предузећима малосеријског типа производње на територији Републике Србије, Model za obezbeđenje unapređenja procesa proizvodnje i lansiranje novog proizvoda u preduzećima maloserijskog tipa proizvodnje na teritoriji Republike Srbije, The model for providing improvement of the manufacturing process andthe launch of new product in small-scale production enterprises on theterritory of the Republic of Serbia",
url = "https://hdl.handle.net/21.15107/rcub_nardus_5534"
}

Vorkapić, M.. (2016). Модел за обезбеђење унапређења процеса производње и лансирање новог производа у предузећима малосеријског типа производње на територији Републике Србије. in Универзитет у Новом Саду
Универзитет у Новом Саду, Технички факултет "Михајло Пупин",  Зрењанин..
https://hdl.handle.net/21.15107/rcub_nardus_5534

Vorkapić M. Модел за обезбеђење унапређења процеса производње и лансирање новог производа у предузећима малосеријског типа производње на територији Републике Србије. in Универзитет у Новом Саду. 2016;.
https://hdl.handle.net/21.15107/rcub_nardus_5534 .

Vorkapić, Miloš, "Модел за обезбеђење унапређења процеса производње и лансирање новог производа у предузећима малосеријског типа производње на територији Републике Србије" in Универзитет у Новом Саду (2016),
https://hdl.handle.net/21.15107/rcub_nardus_5534 .

TY  - JOUR
AU  - Vorkapić, Miloš
AU  - Ćoćkalo, Dragan
AU  - Đorđević, Dejan
PY  - 2016
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/3895
AB  - This  paper  presents  an  algorithm  that  makes  it  possible  to  improve  manufacturing  process  in  an enterprise  with  small  scale  production.  Today,  Lean  concept  is  more  and  more  used  in  the  process  of  improving production. Also, on the case of transmitters' production, implementation of Lean concept is analyzed based on the known principles. Credibility of the algorithm is reflected in giving recommendations on how to eliminate the short comings  in  the  production  process  through  transmitters:  regular  movement  of  employees,  regular  sequence  of operations,  products  design,  and  cooperation  with  customers,  reducing  inventory  and  control  introduction  in  all stages of the process. The paper gives an example of how to save material and other resources in the company.
PB  - Belgrade, Serbia : United Association of Serbia for Quality (UASQ)
T2  - International Journal - Advanced Quality
T1  - The importance of Lean concept in sustainable development of enterprises with small scale production
VL  - 44
IS  - 2
SP  - 19
EP  - 22
DO  - 10.25137/IJAQ.n2.v44.y2016.p23-28
ER  - 

@article{
author = "Vorkapić, Miloš and Ćoćkalo, Dragan and Đorđević, Dejan",
year = "2016",
abstract = "This  paper  presents  an  algorithm  that  makes  it  possible  to  improve  manufacturing  process  in  an enterprise  with  small  scale  production.  Today,  Lean  concept  is  more  and  more  used  in  the  process  of  improving production. Also, on the case of transmitters' production, implementation of Lean concept is analyzed based on the known principles. Credibility of the algorithm is reflected in giving recommendations on how to eliminate the short comings  in  the  production  process  through  transmitters:  regular  movement  of  employees,  regular  sequence  of operations,  products  design,  and  cooperation  with  customers,  reducing  inventory  and  control  introduction  in  all stages of the process. The paper gives an example of how to save material and other resources in the company.",
publisher = "Belgrade, Serbia : United Association of Serbia for Quality (UASQ)",
journal = "International Journal - Advanced Quality",
title = "The importance of Lean concept in sustainable development of enterprises with small scale production",
volume = "44",
number = "2",
pages = "19-22",
doi = "10.25137/IJAQ.n2.v44.y2016.p23-28"
}

Vorkapić, M., Ćoćkalo, D.,& Đorđević, D.. (2016). The importance of Lean concept in sustainable development of enterprises with small scale production. in International Journal - Advanced Quality
Belgrade, Serbia : United Association of Serbia for Quality (UASQ)., 44(2), 19-22.
https://doi.org/10.25137/IJAQ.n2.v44.y2016.p23-28

Vorkapić M, Ćoćkalo D, Đorđević D. The importance of Lean concept in sustainable development of enterprises with small scale production. in International Journal - Advanced Quality. 2016;44(2):19-22.
doi:10.25137/IJAQ.n2.v44.y2016.p23-28 .

Vorkapić, Miloš, Ćoćkalo, Dragan, Đorđević, Dejan, "The importance of Lean concept in sustainable development of enterprises with small scale production" in International Journal - Advanced Quality, 44, no. 2 (2016):19-22,
https://doi.org/10.25137/IJAQ.n2.v44.y2016.p23-28 . .

TY  - JOUR
AU  - Vorkapić, Miloš
AU  - Popović, Bogdan
AU  - Ćoćkalo, Dragan
AU  - Đorđević, Dejan
AU  - Minić, Siniša G.
PY  - 2015
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/1782
AB  - This paper presents the algorithm for introducing the strategies ensuring the sustainable development of enterprises, but also provides improvement of small-scale manufacturing process. Three strategies are given in the algorithm: Remanufacturing, modification and 4R. Credibility of the algorithm is reflected in: defining the basic input and output elements, defining the important environmental factors, importance of resources and in defining a sustainable production process. The combination of the aforementioned strategies enables local enterprises to perceive easily the importance of achievements in developed countries. Reuse of products is implemented through: verification, disassembling, replacement of parts, installation of modified parts and components, cleaning, re-assembling and testing. The algorithm gives an example of how to save materials and energy appearing as huge losses in manufacturing process.
PB  - University of Novi Sad, Technical faculty Mihajlo Pupin, Zrenjanin
T2  - Journal of Engineering Management and Competitiveness (JEMC)
T1  - A model for introducing strategies in sustainable development of small-scale enterprises in Serbia
VL  - 5
IS  - 2
SP  - 77
EP  - 83
DO  - 10.5937/jemc1502077V
ER  - 

@article{
author = "Vorkapić, Miloš and Popović, Bogdan and Ćoćkalo, Dragan and Đorđević, Dejan and Minić, Siniša G.",
year = "2015",
abstract = "This paper presents the algorithm for introducing the strategies ensuring the sustainable development of enterprises, but also provides improvement of small-scale manufacturing process. Three strategies are given in the algorithm: Remanufacturing, modification and 4R. Credibility of the algorithm is reflected in: defining the basic input and output elements, defining the important environmental factors, importance of resources and in defining a sustainable production process. The combination of the aforementioned strategies enables local enterprises to perceive easily the importance of achievements in developed countries. Reuse of products is implemented through: verification, disassembling, replacement of parts, installation of modified parts and components, cleaning, re-assembling and testing. The algorithm gives an example of how to save materials and energy appearing as huge losses in manufacturing process.",
publisher = "University of Novi Sad, Technical faculty Mihajlo Pupin, Zrenjanin",
journal = "Journal of Engineering Management and Competitiveness (JEMC)",
title = "A model for introducing strategies in sustainable development of small-scale enterprises in Serbia",
volume = "5",
number = "2",
pages = "77-83",
doi = "10.5937/jemc1502077V"
}

Vorkapić, M., Popović, B., Ćoćkalo, D., Đorđević, D.,& Minić, S. G.. (2015). A model for introducing strategies in sustainable development of small-scale enterprises in Serbia. in Journal of Engineering Management and Competitiveness (JEMC)
University of Novi Sad, Technical faculty Mihajlo Pupin, Zrenjanin., 5(2), 77-83.
https://doi.org/10.5937/jemc1502077V

Vorkapić M, Popović B, Ćoćkalo D, Đorđević D, Minić SG. A model for introducing strategies in sustainable development of small-scale enterprises in Serbia. in Journal of Engineering Management and Competitiveness (JEMC). 2015;5(2):77-83.
doi:10.5937/jemc1502077V .

Vorkapić, Miloš, Popović, Bogdan, Ćoćkalo, Dragan, Đorđević, Dejan, Minić, Siniša G., "A model for introducing strategies in sustainable development of small-scale enterprises in Serbia" in Journal of Engineering Management and Competitiveness (JEMC), 5, no. 2 (2015):77-83,
https://doi.org/10.5937/jemc1502077V . .