TY  - JOUR
AU  - Vorkapić, Miloš
AU  - Minić, Siniša, G.
AU  - Popović, Bogdan
PY  - 2018
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/3916
AB  - An overview of the application of QFD tools through the application of modular architecture in the new
product realization is presented in this paper. The QFD application can be considered as an engineering method in
the analysis of the buyer's desires and business opportunities in business excellence. The application of modular
architecture in product design provides the realization of new and diverse products suitable for re-use as well as for
materials recycling. From this point of view, we have tried to explain the significance of the new Lean philosophy
from the aspect of re-use of products, reduction of waste and employees’ efficiency increase. In this regard, the QFD
tool represents the link between design and production process improvement.
PB  - UASQ - United Association for Quality of Serbia, Belgrade, Serbia
T2  - International Journal of Advanced Quality
T1  - QFD tools efficiency in business excellence related to small-scale production
VL  - 46
IS  - 1
SP  - 27
EP  - 30
DO  - 10.25137/IJAQ.n1.v46.y2018.p27-31
ER  - 

@article{
author = "Vorkapić, Miloš and Minić, Siniša, G. and Popović, Bogdan",
year = "2018",
abstract = "An overview of the application of QFD tools through the application of modular architecture in the new
product realization is presented in this paper. The QFD application can be considered as an engineering method in
the analysis of the buyer's desires and business opportunities in business excellence. The application of modular
architecture in product design provides the realization of new and diverse products suitable for re-use as well as for
materials recycling. From this point of view, we have tried to explain the significance of the new Lean philosophy
from the aspect of re-use of products, reduction of waste and employees’ efficiency increase. In this regard, the QFD
tool represents the link between design and production process improvement.",
publisher = "UASQ - United Association for Quality of Serbia, Belgrade, Serbia",
journal = "International Journal of Advanced Quality",
title = "QFD tools efficiency in business excellence related to small-scale production",
volume = "46",
number = "1",
pages = "27-30",
doi = "10.25137/IJAQ.n1.v46.y2018.p27-31"
}

Vorkapić, M., Minić, S. G.,& Popović, B.. (2018). QFD tools efficiency in business excellence related to small-scale production. in International Journal of Advanced Quality
UASQ - United Association for Quality of Serbia, Belgrade, Serbia., 46(1), 27-30.
https://doi.org/10.25137/IJAQ.n1.v46.y2018.p27-31

Vorkapić M, Minić SG, Popović B. QFD tools efficiency in business excellence related to small-scale production. in International Journal of Advanced Quality. 2018;46(1):27-30.
doi:10.25137/IJAQ.n1.v46.y2018.p27-31 .

Vorkapić, Miloš, Minić, Siniša, G., Popović, Bogdan, "QFD tools efficiency in business excellence related to small-scale production" in International Journal of Advanced Quality, 46, no. 1 (2018):27-30,
https://doi.org/10.25137/IJAQ.n1.v46.y2018.p27-31 . .

TY  - CONF
AU  - Minić, Siniša, G.
AU  - Živojinović, Danijela
AU  - Vorkapić, Miloš
AU  - Luković, Snežana
PY  - 2017
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/3900
AB  - U ovom radu dat je prikaz rešenja koje je projektovano pomoću CAD
aplikativnih softvera. Rad je koncipiran da pokaže kakav je značaj upotrebe
aplikativnog softvera u domenu: racionalne potrošnje materijala, analize ponovne
upotrebe proizvoda i elemenata zaštite životne sredine. U cilju optimizacije celokupnog
procesa projektovanja, razvoja i/ili održavanja sistema u različitim granama industrije
(gradjevina, mašinstvo). Dakle, posredstvom istih u značajnoj meri se pojednostavljuje:
3D modelovanje kako pojedinačnih mašinskih komponenti, tako i podsklopova i
sklopova, izrada prateće 2D tehničke dokumentacija, izrada komponenti na CNC
mašinama, proračun čvrstoće, odnosno radnog veka i integriteta konstrukcije.
Ključne reči: Proizvod, projektovanje, CAD aplikativni softver, materijal,
strategije, zaštita životne sredine.
AB  - This work contains a display of solutions which is projected using CAD
applicable software. The Study is designed to show what is the meaning of usage of
applicable software within the following domain: rational consumption of material,
analysis of reuse of products and elements of environmental protection, in order to
optimize the complete process of designing, development and/or sustaining systems in
different industry branches (construction, machinery). Therefore, by means of
aforementioned, comes to considerable simplicity of 3D modeling of, forasmuch as
individual machinery components, as much as subassemblies and assemblies, creation
of following 2D technical documentation, creation of components on CNC machines,
forecast of solidity, operating time and construction integrity.
PB  - Univerzitet u Kragujevcu, Fakultet tehničkih nauka u Čačku, Čačak
C3  - ITOP17, Druga nacionalna konferencija sa međunarodnim učešćem, 08-09 April 2017., Čačak, Srbija
T1  - Projektovanje pomoću CAD aplikativnih softvera u cilju unapređenja procesa proizvodnje
T1  - Designing by CAD application software in order to improve production process
SP  - 415
EP  - 422
UR  - https://hdl.handle.net/21.15107/rcub_cer_3900
ER  - 

@conference{
author = "Minić, Siniša, G. and Živojinović, Danijela and Vorkapić, Miloš and Luković, Snežana",
year = "2017",
abstract = "U ovom radu dat je prikaz rešenja koje je projektovano pomoću CAD
aplikativnih softvera. Rad je koncipiran da pokaže kakav je značaj upotrebe
aplikativnog softvera u domenu: racionalne potrošnje materijala, analize ponovne
upotrebe proizvoda i elemenata zaštite životne sredine. U cilju optimizacije celokupnog
procesa projektovanja, razvoja i/ili održavanja sistema u različitim granama industrije
(gradjevina, mašinstvo). Dakle, posredstvom istih u značajnoj meri se pojednostavljuje:
3D modelovanje kako pojedinačnih mašinskih komponenti, tako i podsklopova i
sklopova, izrada prateće 2D tehničke dokumentacija, izrada komponenti na CNC
mašinama, proračun čvrstoće, odnosno radnog veka i integriteta konstrukcije.
Ključne reči: Proizvod, projektovanje, CAD aplikativni softver, materijal,
strategije, zaštita životne sredine., This work contains a display of solutions which is projected using CAD
applicable software. The Study is designed to show what is the meaning of usage of
applicable software within the following domain: rational consumption of material,
analysis of reuse of products and elements of environmental protection, in order to
optimize the complete process of designing, development and/or sustaining systems in
different industry branches (construction, machinery). Therefore, by means of
aforementioned, comes to considerable simplicity of 3D modeling of, forasmuch as
individual machinery components, as much as subassemblies and assemblies, creation
of following 2D technical documentation, creation of components on CNC machines,
forecast of solidity, operating time and construction integrity.",
publisher = "Univerzitet u Kragujevcu, Fakultet tehničkih nauka u Čačku, Čačak",
journal = "ITOP17, Druga nacionalna konferencija sa međunarodnim učešćem, 08-09 April 2017., Čačak, Srbija",
title = "Projektovanje pomoću CAD aplikativnih softvera u cilju unapređenja procesa proizvodnje, Designing by CAD application software in order to improve production process",
pages = "415-422",
url = "https://hdl.handle.net/21.15107/rcub_cer_3900"
}

Minić, S. G., Živojinović, D., Vorkapić, M.,& Luković, S.. (2017). Projektovanje pomoću CAD aplikativnih softvera u cilju unapređenja procesa proizvodnje. in ITOP17, Druga nacionalna konferencija sa međunarodnim učešćem, 08-09 April 2017., Čačak, Srbija
Univerzitet u Kragujevcu, Fakultet tehničkih nauka u Čačku, Čačak., 415-422.
https://hdl.handle.net/21.15107/rcub_cer_3900

Minić SG, Živojinović D, Vorkapić M, Luković S. Projektovanje pomoću CAD aplikativnih softvera u cilju unapređenja procesa proizvodnje. in ITOP17, Druga nacionalna konferencija sa međunarodnim učešćem, 08-09 April 2017., Čačak, Srbija. 2017;:415-422.
https://hdl.handle.net/21.15107/rcub_cer_3900 .

Minić, Siniša, G., Živojinović, Danijela, Vorkapić, Miloš, Luković, Snežana, "Projektovanje pomoću CAD aplikativnih softvera u cilju unapređenja procesa proizvodnje" in ITOP17, Druga nacionalna konferencija sa međunarodnim učešćem, 08-09 April 2017., Čačak, Srbija (2017):415-422,
https://hdl.handle.net/21.15107/rcub_cer_3900 .

TY  - CONF
AU  - Vorkapić, Miloš
AU  - Ćoćkalo, Dragan
AU  - Đorđević, Dejan
AU  - Minić, Siniša, G.
AU  - Terek, Edit
PY  - 2016
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/3894
AB  - ”Market pull” strategy is dominating in small scale manufacturing enterprises in the Republic of Serbia. The research whose results are presented in this work has determined the significance of this strategy from the aspect of developing new products. The strategy is reflected in close collaboration of enterprises and their customers, from the idea to the final product, including R & D activities. Beside customers, the main sources of ideas are: competitors and fairs. It has been also determined that marketing activities related to introduction of new products are limited and in comparison to the results from surrounding countries Serbia doesn’t lag behind. However, in order to improve the activities related to the development of new products in Serbian small-scale manufacturing enterprises we have suggested two strategies in this work: ”open innovation” in making closer collaboration with external knowledge sources and the creation of ”innovative networks” with partners in this concept usage. Limitations of this research are: weak feedback from respondents (the questionnaire was sent by e-mail), geographical limitations of the sample and the lack of homogenious sample group in the analysis of certain parameters.
PB  - Zrenjanin : University of Novi Sad, Technical Faculty "Mihajlo Pupin"
C3  - Proceedings - VI International Symposium Engineering Management and Competitiveness 2016 (EMC 2016)
T1  - The importance of new product development in Serbian small-scale manufacturing enterprises
SP  - 37
EP  - 42
UR  - https://hdl.handle.net/21.15107/rcub_cer_3894
ER  - 

@conference{
author = "Vorkapić, Miloš and Ćoćkalo, Dragan and Đorđević, Dejan and Minić, Siniša, G. and Terek, Edit",
year = "2016",
abstract = "”Market pull” strategy is dominating in small scale manufacturing enterprises in the Republic of Serbia. The research whose results are presented in this work has determined the significance of this strategy from the aspect of developing new products. The strategy is reflected in close collaboration of enterprises and their customers, from the idea to the final product, including R & D activities. Beside customers, the main sources of ideas are: competitors and fairs. It has been also determined that marketing activities related to introduction of new products are limited and in comparison to the results from surrounding countries Serbia doesn’t lag behind. However, in order to improve the activities related to the development of new products in Serbian small-scale manufacturing enterprises we have suggested two strategies in this work: ”open innovation” in making closer collaboration with external knowledge sources and the creation of ”innovative networks” with partners in this concept usage. Limitations of this research are: weak feedback from respondents (the questionnaire was sent by e-mail), geographical limitations of the sample and the lack of homogenious sample group in the analysis of certain parameters.",
publisher = "Zrenjanin : University of Novi Sad, Technical Faculty "Mihajlo Pupin"",
journal = "Proceedings - VI International Symposium Engineering Management and Competitiveness 2016 (EMC 2016)",
title = "The importance of new product development in Serbian small-scale manufacturing enterprises",
pages = "37-42",
url = "https://hdl.handle.net/21.15107/rcub_cer_3894"
}

Vorkapić, M., Ćoćkalo, D., Đorđević, D., Minić, S. G.,& Terek, E.. (2016). The importance of new product development in Serbian small-scale manufacturing enterprises. in Proceedings - VI International Symposium Engineering Management and Competitiveness 2016 (EMC 2016)
Zrenjanin : University of Novi Sad, Technical Faculty "Mihajlo Pupin"., 37-42.
https://hdl.handle.net/21.15107/rcub_cer_3894

Vorkapić M, Ćoćkalo D, Đorđević D, Minić SG, Terek E. The importance of new product development in Serbian small-scale manufacturing enterprises. in Proceedings - VI International Symposium Engineering Management and Competitiveness 2016 (EMC 2016). 2016;:37-42.
https://hdl.handle.net/21.15107/rcub_cer_3894 .

Vorkapić, Miloš, Ćoćkalo, Dragan, Đorđević, Dejan, Minić, Siniša, G., Terek, Edit, "The importance of new product development in Serbian small-scale manufacturing enterprises" in Proceedings - VI International Symposium Engineering Management and Competitiveness 2016 (EMC 2016) (2016):37-42,
https://hdl.handle.net/21.15107/rcub_cer_3894 .

TY  - JOUR
AU  - Vorkapić, Miloš
AU  - Popović, Bogdan
AU  - Poljak, Predrag
AU  - Starčević, Marko
AU  - Minić, Siniša G.
PY  - 2015
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/1692
AB  - This paper presents a algorithm for the improvement of the manufacturing process developed and tested for small-scale enterprise. The validity of the algorithm can be seen through: defining basic elements, defining environmental factors, the importance of resources, and the analysis of input and output in the manufacturing process. The algorithm incorporates implemented strategies: remanufacturing and 4Rs. The paper analyzed the temperature transmitter at the end of its life circle. Reuse transmitter is realized through: checking, disassembly, replacement parts, cleaning, re-assembling and testing. The work provides an example of how to save energy and materials which appear as large losses in the manufacturing process.
AB  - ovom radu prikazan je algoritam za obezbeđenje unapređenja procesa proizvodnje u preduzeću maloserijskog tipa proizvodnje. Verodostojnost algoritma se ogleda kroz: definisanje osnovnih elemenata, definisanje faktora okruženja, značaj resursa, analizu ulaza i izlaza u procesu proizvodnje. Algoritam u sebi sadrži implementirane strategije: reproizovdnju i 4R. U radu analiziran je transmiter temperature na kraju životnog veka. Ponovna upotreba transmitera se realizuje kroz: proveru, rastavljanje, zamenu delova, čišćenje, ponovno sastavljenje i testiranje. Rad daje primer kako uštedeti na materijalu i energiji koji se javljaju kao veliki gubici u procesu proizvodnje.
PB  - Savez inženjera i tehničara Srbije
T2  - Tehnika
T1  - The importance of remanufacturing in transmitters production
T1  - Značaj reproizvodnje u proizvodnji transmitera
VL  - 70
IS  - 4
SP  - 712
EP  - 718
DO  - 10.5937/tehnika1504712V
ER  - 

@article{
author = "Vorkapić, Miloš and Popović, Bogdan and Poljak, Predrag and Starčević, Marko and Minić, Siniša G.",
year = "2015",
abstract = "This paper presents a algorithm for the improvement of the manufacturing process developed and tested for small-scale enterprise. The validity of the algorithm can be seen through: defining basic elements, defining environmental factors, the importance of resources, and the analysis of input and output in the manufacturing process. The algorithm incorporates implemented strategies: remanufacturing and 4Rs. The paper analyzed the temperature transmitter at the end of its life circle. Reuse transmitter is realized through: checking, disassembly, replacement parts, cleaning, re-assembling and testing. The work provides an example of how to save energy and materials which appear as large losses in the manufacturing process., ovom radu prikazan je algoritam za obezbeđenje unapređenja procesa proizvodnje u preduzeću maloserijskog tipa proizvodnje. Verodostojnost algoritma se ogleda kroz: definisanje osnovnih elemenata, definisanje faktora okruženja, značaj resursa, analizu ulaza i izlaza u procesu proizvodnje. Algoritam u sebi sadrži implementirane strategije: reproizovdnju i 4R. U radu analiziran je transmiter temperature na kraju životnog veka. Ponovna upotreba transmitera se realizuje kroz: proveru, rastavljanje, zamenu delova, čišćenje, ponovno sastavljenje i testiranje. Rad daje primer kako uštedeti na materijalu i energiji koji se javljaju kao veliki gubici u procesu proizvodnje.",
publisher = "Savez inženjera i tehničara Srbije",
journal = "Tehnika",
title = "The importance of remanufacturing in transmitters production, Značaj reproizvodnje u proizvodnji transmitera",
volume = "70",
number = "4",
pages = "712-718",
doi = "10.5937/tehnika1504712V"
}

Vorkapić, M., Popović, B., Poljak, P., Starčević, M.,& Minić, S. G.. (2015). The importance of remanufacturing in transmitters production. in Tehnika
Savez inženjera i tehničara Srbije., 70(4), 712-718.
https://doi.org/10.5937/tehnika1504712V

Vorkapić M, Popović B, Poljak P, Starčević M, Minić SG. The importance of remanufacturing in transmitters production. in Tehnika. 2015;70(4):712-718.
doi:10.5937/tehnika1504712V .

Vorkapić, Miloš, Popović, Bogdan, Poljak, Predrag, Starčević, Marko, Minić, Siniša G., "The importance of remanufacturing in transmitters production" in Tehnika, 70, no. 4 (2015):712-718,
https://doi.org/10.5937/tehnika1504712V . .

TY  - JOUR
AU  - Vorkapić, Miloš
AU  - Popović, Bogdan
AU  - Ćoćkalo, Dragan
AU  - Đorđević, Dejan
AU  - Minić, Siniša G.
PY  - 2015
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/1782
AB  - This paper presents the algorithm for introducing the strategies ensuring the sustainable development of enterprises, but also provides improvement of small-scale manufacturing process. Three strategies are given in the algorithm: Remanufacturing, modification and 4R. Credibility of the algorithm is reflected in: defining the basic input and output elements, defining the important environmental factors, importance of resources and in defining a sustainable production process. The combination of the aforementioned strategies enables local enterprises to perceive easily the importance of achievements in developed countries. Reuse of products is implemented through: verification, disassembling, replacement of parts, installation of modified parts and components, cleaning, re-assembling and testing. The algorithm gives an example of how to save materials and energy appearing as huge losses in manufacturing process.
PB  - University of Novi Sad, Technical faculty Mihajlo Pupin, Zrenjanin
T2  - Journal of Engineering Management and Competitiveness (JEMC)
T1  - A model for introducing strategies in sustainable development of small-scale enterprises in Serbia
VL  - 5
IS  - 2
SP  - 77
EP  - 83
DO  - 10.5937/jemc1502077V
ER  - 

@article{
author = "Vorkapić, Miloš and Popović, Bogdan and Ćoćkalo, Dragan and Đorđević, Dejan and Minić, Siniša G.",
year = "2015",
abstract = "This paper presents the algorithm for introducing the strategies ensuring the sustainable development of enterprises, but also provides improvement of small-scale manufacturing process. Three strategies are given in the algorithm: Remanufacturing, modification and 4R. Credibility of the algorithm is reflected in: defining the basic input and output elements, defining the important environmental factors, importance of resources and in defining a sustainable production process. The combination of the aforementioned strategies enables local enterprises to perceive easily the importance of achievements in developed countries. Reuse of products is implemented through: verification, disassembling, replacement of parts, installation of modified parts and components, cleaning, re-assembling and testing. The algorithm gives an example of how to save materials and energy appearing as huge losses in manufacturing process.",
publisher = "University of Novi Sad, Technical faculty Mihajlo Pupin, Zrenjanin",
journal = "Journal of Engineering Management and Competitiveness (JEMC)",
title = "A model for introducing strategies in sustainable development of small-scale enterprises in Serbia",
volume = "5",
number = "2",
pages = "77-83",
doi = "10.5937/jemc1502077V"
}

Vorkapić, M., Popović, B., Ćoćkalo, D., Đorđević, D.,& Minić, S. G.. (2015). A model for introducing strategies in sustainable development of small-scale enterprises in Serbia. in Journal of Engineering Management and Competitiveness (JEMC)
University of Novi Sad, Technical faculty Mihajlo Pupin, Zrenjanin., 5(2), 77-83.
https://doi.org/10.5937/jemc1502077V

Vorkapić M, Popović B, Ćoćkalo D, Đorđević D, Minić SG. A model for introducing strategies in sustainable development of small-scale enterprises in Serbia. in Journal of Engineering Management and Competitiveness (JEMC). 2015;5(2):77-83.
doi:10.5937/jemc1502077V .

Vorkapić, Miloš, Popović, Bogdan, Ćoćkalo, Dragan, Đorđević, Dejan, Minić, Siniša G., "A model for introducing strategies in sustainable development of small-scale enterprises in Serbia" in Journal of Engineering Management and Competitiveness (JEMC), 5, no. 2 (2015):77-83,
https://doi.org/10.5937/jemc1502077V . .

TY  - CONF
AU  - Minić, Siniša, G.
AU  - Vorkapić, Miloš
PY  - 2015
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/3893
AB  - Remote cotrol management has enabled engineers to easily and quickly operate the facility management directly from their work place, making it possible to connect production facilities in large systems (which are localized at a distance of several hundred kilometers). Placing the observed object into the network with the computer that manages that object (PLC) data acquisition is achieved and thus the management is realized. For monitoring these systems there are multiple ways, depending on the management (parameters that govern). Monitoring can be realized by using video surveillance or collecting data / telemetry parameters (liquid level, temperature of the manufacturing process, the position of measuring by the encoder, etc.) which offers one of the most important systems for managing and monitoring, today's SCADA (Supervisory Control And Data Acquistion) system. Our work is based precisely on these three areas: management, communication with the user and the monitoring of one production process
PB  - University of Niš, Faculty of Electronic Engineering
C3  - Proceedings of full papers - 12th International Conference on Applied Electromagnetics, PES 2015, Niš, Serbia
T1  - Controling the robotic arm using human machine interface and plc modicon m340
SP  - 1
EP  - 4
UR  - https://hdl.handle.net/21.15107/rcub_cer_3893
ER  - 

@conference{
author = "Minić, Siniša, G. and Vorkapić, Miloš",
year = "2015",
abstract = "Remote cotrol management has enabled engineers to easily and quickly operate the facility management directly from their work place, making it possible to connect production facilities in large systems (which are localized at a distance of several hundred kilometers). Placing the observed object into the network with the computer that manages that object (PLC) data acquisition is achieved and thus the management is realized. For monitoring these systems there are multiple ways, depending on the management (parameters that govern). Monitoring can be realized by using video surveillance or collecting data / telemetry parameters (liquid level, temperature of the manufacturing process, the position of measuring by the encoder, etc.) which offers one of the most important systems for managing and monitoring, today's SCADA (Supervisory Control And Data Acquistion) system. Our work is based precisely on these three areas: management, communication with the user and the monitoring of one production process",
publisher = "University of Niš, Faculty of Electronic Engineering",
journal = "Proceedings of full papers - 12th International Conference on Applied Electromagnetics, PES 2015, Niš, Serbia",
title = "Controling the robotic arm using human machine interface and plc modicon m340",
pages = "1-4",
url = "https://hdl.handle.net/21.15107/rcub_cer_3893"
}

Minić, S. G.,& Vorkapić, M.. (2015). Controling the robotic arm using human machine interface and plc modicon m340. in Proceedings of full papers - 12th International Conference on Applied Electromagnetics, PES 2015, Niš, Serbia
University of Niš, Faculty of Electronic Engineering., 1-4.
https://hdl.handle.net/21.15107/rcub_cer_3893

Minić SG, Vorkapić M. Controling the robotic arm using human machine interface and plc modicon m340. in Proceedings of full papers - 12th International Conference on Applied Electromagnetics, PES 2015, Niš, Serbia. 2015;:1-4.
https://hdl.handle.net/21.15107/rcub_cer_3893 .

Minić, Siniša, G., Vorkapić, Miloš, "Controling the robotic arm using human machine interface and plc modicon m340" in Proceedings of full papers - 12th International Conference on Applied Electromagnetics, PES 2015, Niš, Serbia (2015):1-4,
https://hdl.handle.net/21.15107/rcub_cer_3893 .