TY  - JOUR
AU  - Nikolić, Nebojša D.
PY  - 2005
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/208
AB  - The effect of imposed magnetic fields onto the electrodeposition of magnetic (nickel) and non – magnetic (copper) metals was analysed. Also, magnetic properties of electrochemically obtained nanocontacts were examined. An effort to establish a possible correlation between the morphologies of the nanocontacts and the effect of the very large ballistic magnetoresistance (BMR effect) was made.
AB  - Analiziran je uticaj primenjenog magnetnog polja na elektohemijsko taloženje magnetnih (nikla) i nemagnetnih metala (bakra). Promena morfologije za vreme elektrohemijskog taloženja nikla pod uticajem vertikalno orijentisanog polja se pripisuje uticaju magnetnog polja na magnetne osobine nikla. Takođe, u radu su ispitane i magnetne osobine elektrohemijski dobijenih magnetnih nanokontakata. Učinjen je pokušaj da se uspostavi veza između morfologije nanokontakata i visokog efekta balističke magnetorezistencije.
PB  - Serbian Chemical Society
T2  - Journal of the Serbian Chemical Society
T1  - Magnetic effects in electrochemistry
T1  - Magnetni efekti u elektrohemiji
VL  - 70
IS  - 5
SP  - 785
EP  - 787
DO  - 10.2298/JSC0505785N
ER  - 

@article{
author = "Nikolić, Nebojša D.",
year = "2005",
abstract = "The effect of imposed magnetic fields onto the electrodeposition of magnetic (nickel) and non – magnetic (copper) metals was analysed. Also, magnetic properties of electrochemically obtained nanocontacts were examined. An effort to establish a possible correlation between the morphologies of the nanocontacts and the effect of the very large ballistic magnetoresistance (BMR effect) was made., Analiziran je uticaj primenjenog magnetnog polja na elektohemijsko taloženje magnetnih (nikla) i nemagnetnih metala (bakra). Promena morfologije za vreme elektrohemijskog taloženja nikla pod uticajem vertikalno orijentisanog polja se pripisuje uticaju magnetnog polja na magnetne osobine nikla. Takođe, u radu su ispitane i magnetne osobine elektrohemijski dobijenih magnetnih nanokontakata. Učinjen je pokušaj da se uspostavi veza između morfologije nanokontakata i visokog efekta balističke magnetorezistencije.",
publisher = "Serbian Chemical Society",
journal = "Journal of the Serbian Chemical Society",
title = "Magnetic effects in electrochemistry, Magnetni efekti u elektrohemiji",
volume = "70",
number = "5",
pages = "785-787",
doi = "10.2298/JSC0505785N"
}

Nikolić, N. D.. (2005). Magnetic effects in electrochemistry. in Journal of the Serbian Chemical Society
Serbian Chemical Society., 70(5), 785-787.
https://doi.org/10.2298/JSC0505785N

Nikolić ND. Magnetic effects in electrochemistry. in Journal of the Serbian Chemical Society. 2005;70(5):785-787.
doi:10.2298/JSC0505785N .

Nikolić, Nebojša D., "Magnetic effects in electrochemistry" in Journal of the Serbian Chemical Society, 70, no. 5 (2005):785-787,
https://doi.org/10.2298/JSC0505785N . .

TY  - JOUR
AU  - Popov, Konstantin I.
AU  - Krstić, Snežana B.
AU  - Pavlović, Miomir
AU  - Pavlović, Ljubica
AU  - Maksimović, Vesna M.
PY  - 2004
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/136
AB  - The structure of powder particleswas analysed by considering their cross sections. It was shown that the structure of powder particles of nonsieved flowing powders is sufficiently dense to produce a continuous surface, which does not allow the particles to jam and hence permits the free flow of nonsieved powder. It was also shown that the representative powder particle the elementary cell of which can be presented by a 3D-cross, describes the properties of the powder relative to its flowability well.
AB  - Analizirana je struktura čestica praha razmatranjem njihovog poprečnog preseka Pokazano je da je struktura čestica nesejanog praha koji teče dovoljno gusta da obrazuje kontinualnu površinu, koja ne dozvoljava zaglavljivanje čestica i samim tim omogućava slobodno tečenje nesejanih prahova. Takođe je pokazano da reprezentativna čestica praha, čija se elementarna ćelija može predstaviti 3D-krstom, dobro opisuje osobine praha koje se odnose na tečljivost.
PB  - Serbian Chemical Society
T2  - Journal of the Serbian Chemical Society
T1  - The effect of the particle shape and structure on the flowability of electrolytic copper powder IV: The internal structure of the powder particles
T1  - Uticaj oblika i strukture čestica na tečljivost elektrolitičkog bakarnog praha IV - unutrašnja struktura čestica praha
VL  - 69
IS  - 10
SP  - 817
EP  - 825
DO  - 10.2298/JSC0410817P
ER  - 

@article{
author = "Popov, Konstantin I. and Krstić, Snežana B. and Pavlović, Miomir and Pavlović, Ljubica and Maksimović, Vesna M.",
year = "2004",
abstract = "The structure of powder particleswas analysed by considering their cross sections. It was shown that the structure of powder particles of nonsieved flowing powders is sufficiently dense to produce a continuous surface, which does not allow the particles to jam and hence permits the free flow of nonsieved powder. It was also shown that the representative powder particle the elementary cell of which can be presented by a 3D-cross, describes the properties of the powder relative to its flowability well., Analizirana je struktura čestica praha razmatranjem njihovog poprečnog preseka Pokazano je da je struktura čestica nesejanog praha koji teče dovoljno gusta da obrazuje kontinualnu površinu, koja ne dozvoljava zaglavljivanje čestica i samim tim omogućava slobodno tečenje nesejanih prahova. Takođe je pokazano da reprezentativna čestica praha, čija se elementarna ćelija može predstaviti 3D-krstom, dobro opisuje osobine praha koje se odnose na tečljivost.",
publisher = "Serbian Chemical Society",
journal = "Journal of the Serbian Chemical Society",
title = "The effect of the particle shape and structure on the flowability of electrolytic copper powder IV: The internal structure of the powder particles, Uticaj oblika i strukture čestica na tečljivost elektrolitičkog bakarnog praha IV - unutrašnja struktura čestica praha",
volume = "69",
number = "10",
pages = "817-825",
doi = "10.2298/JSC0410817P"
}

Popov, K. I., Krstić, S. B., Pavlović, M., Pavlović, L.,& Maksimović, V. M.. (2004). The effect of the particle shape and structure on the flowability of electrolytic copper powder IV: The internal structure of the powder particles. in Journal of the Serbian Chemical Society
Serbian Chemical Society., 69(10), 817-825.
https://doi.org/10.2298/JSC0410817P

Popov KI, Krstić SB, Pavlović M, Pavlović L, Maksimović VM. The effect of the particle shape and structure on the flowability of electrolytic copper powder IV: The internal structure of the powder particles. in Journal of the Serbian Chemical Society. 2004;69(10):817-825.
doi:10.2298/JSC0410817P .

Popov, Konstantin I., Krstić, Snežana B., Pavlović, Miomir, Pavlović, Ljubica, Maksimović, Vesna M., "The effect of the particle shape and structure on the flowability of electrolytic copper powder IV: The internal structure of the powder particles" in Journal of the Serbian Chemical Society, 69, no. 10 (2004):817-825,
https://doi.org/10.2298/JSC0410817P . .

TY  - JOUR
AU  - Popov, Konstantin I.
AU  - Krstić, Snežana B.
AU  - Obradović, Milutin Č.
AU  - Pavlović, Miomir
AU  - Pavlović, Ljubica
AU  - Ivanović, Evica
PY  - 2004
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/149
AB  - The structure of the surface of copper powder particles is discussed and correlated with the lowest apparent density at which copper powder can still flow. It is shown that such structures can be easily obtained in the electrodeposition of powders in reversing current regimes.
AB  - Razmatrana je struktura površine čestica bakarnog praha i korelisana s najmanjom nasipnom masom pri kojoj bakarni prah još uvek može da teče. Pokazano je da se takva struktura može lako dobiti elektrohemijskim taloženjem praha u režimu reversne struje.
PB  - Serbian Chemical Society
T2  - Journal of the Serbian Chemical Society
T1  - The effect of the particle shape and structure on the flowability of electrolytic copper powder, III: A model of the surface of a representative particle of flowing copper powder electrodeposited by reversing current
T1  - Uticaj oblika I strukture čestica na tečljivost elektrolitičkog bakarnog praha III - model površine reprezentativne čestice tečljivog bakarnog praha dobijenog elektohemijskim taloženjem reversnom strujom
VL  - 69
IS  - 1
SP  - 43
EP  - 51
DO  - 10.2298/JSC0401043P
ER  - 

@article{
author = "Popov, Konstantin I. and Krstić, Snežana B. and Obradović, Milutin Č. and Pavlović, Miomir and Pavlović, Ljubica and Ivanović, Evica",
year = "2004",
abstract = "The structure of the surface of copper powder particles is discussed and correlated with the lowest apparent density at which copper powder can still flow. It is shown that such structures can be easily obtained in the electrodeposition of powders in reversing current regimes., Razmatrana je struktura površine čestica bakarnog praha i korelisana s najmanjom nasipnom masom pri kojoj bakarni prah još uvek može da teče. Pokazano je da se takva struktura može lako dobiti elektrohemijskim taloženjem praha u režimu reversne struje.",
publisher = "Serbian Chemical Society",
journal = "Journal of the Serbian Chemical Society",
title = "The effect of the particle shape and structure on the flowability of electrolytic copper powder, III: A model of the surface of a representative particle of flowing copper powder electrodeposited by reversing current, Uticaj oblika I strukture čestica na tečljivost elektrolitičkog bakarnog praha III - model površine reprezentativne čestice tečljivog bakarnog praha dobijenog elektohemijskim taloženjem reversnom strujom",
volume = "69",
number = "1",
pages = "43-51",
doi = "10.2298/JSC0401043P"
}

Popov, K. I., Krstić, S. B., Obradović, M. Č., Pavlović, M., Pavlović, L.,& Ivanović, E.. (2004). The effect of the particle shape and structure on the flowability of electrolytic copper powder, III: A model of the surface of a representative particle of flowing copper powder electrodeposited by reversing current. in Journal of the Serbian Chemical Society
Serbian Chemical Society., 69(1), 43-51.
https://doi.org/10.2298/JSC0401043P

Popov KI, Krstić SB, Obradović MČ, Pavlović M, Pavlović L, Ivanović E. The effect of the particle shape and structure on the flowability of electrolytic copper powder, III: A model of the surface of a representative particle of flowing copper powder electrodeposited by reversing current. in Journal of the Serbian Chemical Society. 2004;69(1):43-51.
doi:10.2298/JSC0401043P .

Popov, Konstantin I., Krstić, Snežana B., Obradović, Milutin Č., Pavlović, Miomir, Pavlović, Ljubica, Ivanović, Evica, "The effect of the particle shape and structure on the flowability of electrolytic copper powder, III: A model of the surface of a representative particle of flowing copper powder electrodeposited by reversing current" in Journal of the Serbian Chemical Society, 69, no. 1 (2004):43-51,
https://doi.org/10.2298/JSC0401043P . .

TY  - JOUR
AU  - Popov, Konstantin I.
AU  - Krstić, Snežana B.
AU  - Obradović, Milutin Č.
AU  - Pavlović, Miomir
AU  - Pavlović, Ljubica
AU  - Ivanović, Evica
PY  - 2003
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/110
AB  - One of the most important properties of copper powder is its flow ability which depends on the shape and the structure of the powder particles. A procedure for the determination of a representative powder particle permitting the free flow of copper powder is proposed.
AB  - Jedno od najvažnijih svojstava bakarnog praha je njegova tečljivost, koja zavisi od oblika i strukture čestica praha. Predložen je postupak za određivanje reprezentativne čestice praha koja obezbeđuje slobodno tečenje bakarnog praha.
PB  - Serbian Chemical Society
T2  - Journal of the Serbian Chemical Society
T1  - The effect of the particle shape and structure on the flowability of electrolytic copper powder I: Modeling of a representative powder particle
T1  - Uticaj oblika i strukture čestica na tečljivost elektrolitičkog bakarnog praha I - modelovanje reprezentativne čestice praha
VL  - 68
IS  - 10
SP  - 771
EP  - 778
DO  - 10.2298/JSC0310771P
ER  - 

@article{
author = "Popov, Konstantin I. and Krstić, Snežana B. and Obradović, Milutin Č. and Pavlović, Miomir and Pavlović, Ljubica and Ivanović, Evica",
year = "2003",
abstract = "One of the most important properties of copper powder is its flow ability which depends on the shape and the structure of the powder particles. A procedure for the determination of a representative powder particle permitting the free flow of copper powder is proposed., Jedno od najvažnijih svojstava bakarnog praha je njegova tečljivost, koja zavisi od oblika i strukture čestica praha. Predložen je postupak za određivanje reprezentativne čestice praha koja obezbeđuje slobodno tečenje bakarnog praha.",
publisher = "Serbian Chemical Society",
journal = "Journal of the Serbian Chemical Society",
title = "The effect of the particle shape and structure on the flowability of electrolytic copper powder I: Modeling of a representative powder particle, Uticaj oblika i strukture čestica na tečljivost elektrolitičkog bakarnog praha I - modelovanje reprezentativne čestice praha",
volume = "68",
number = "10",
pages = "771-778",
doi = "10.2298/JSC0310771P"
}

Popov, K. I., Krstić, S. B., Obradović, M. Č., Pavlović, M., Pavlović, L.,& Ivanović, E.. (2003). The effect of the particle shape and structure on the flowability of electrolytic copper powder I: Modeling of a representative powder particle. in Journal of the Serbian Chemical Society
Serbian Chemical Society., 68(10), 771-778.
https://doi.org/10.2298/JSC0310771P

Popov KI, Krstić SB, Obradović MČ, Pavlović M, Pavlović L, Ivanović E. The effect of the particle shape and structure on the flowability of electrolytic copper powder I: Modeling of a representative powder particle. in Journal of the Serbian Chemical Society. 2003;68(10):771-778.
doi:10.2298/JSC0310771P .

Popov, Konstantin I., Krstić, Snežana B., Obradović, Milutin Č., Pavlović, Miomir, Pavlović, Ljubica, Ivanović, Evica, "The effect of the particle shape and structure on the flowability of electrolytic copper powder I: Modeling of a representative powder particle" in Journal of the Serbian Chemical Society, 68, no. 10 (2003):771-778,
https://doi.org/10.2298/JSC0310771P . .

TY  - JOUR
AU  - Pavlović, Miomir
AU  - Nikolić, Nebojša D.
AU  - Popov, Konstantin I.
PY  - 2003
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/111
AB  - The current efficiency during the cathodic period of reversing current in copper powder deposition was determined by measuring the quantity of hydrogen evolved. The diagrams from which the instantaneous and average current efficiencies for copper deposition can be extracted for any deposition time up to 30 min are given. A procedure for the calculation of the overall current efficiency is proposed.
AB  - Određivano je iskorišćenje struje za vreme katodnog perioda reversne struje pri taloženju bakarnog praha, merenjem količine izdvojenog vodonika. Dati su dijagrami iz kojih mogu biti izračunata trenutna i srednja iskorišćenja struje za taloženje bakarnog praha, za bilo koje vreme taloženja do 30 minuta. Predložen je postupak proračuna ukupnog iskorišćenja struje.
PB  - Serbian Chemical Society
T2  - Journal of the Serbian Chemical Society
T1  - The current efficiency during the cathodic period of reversing current in copper powder deposition and the overall current efficiency
T1  - Iskorišćenje struje za vreme katodnog perioda reversne struje pri taloženju bakarnog praha i ukupno iskorišćenje struje
VL  - 68
IS  - 8-9
SP  - 649
EP  - 656
DO  - 10.2298/JSC0309649P
ER  - 

@article{
author = "Pavlović, Miomir and Nikolić, Nebojša D. and Popov, Konstantin I.",
year = "2003",
abstract = "The current efficiency during the cathodic period of reversing current in copper powder deposition was determined by measuring the quantity of hydrogen evolved. The diagrams from which the instantaneous and average current efficiencies for copper deposition can be extracted for any deposition time up to 30 min are given. A procedure for the calculation of the overall current efficiency is proposed., Određivano je iskorišćenje struje za vreme katodnog perioda reversne struje pri taloženju bakarnog praha, merenjem količine izdvojenog vodonika. Dati su dijagrami iz kojih mogu biti izračunata trenutna i srednja iskorišćenja struje za taloženje bakarnog praha, za bilo koje vreme taloženja do 30 minuta. Predložen je postupak proračuna ukupnog iskorišćenja struje.",
publisher = "Serbian Chemical Society",
journal = "Journal of the Serbian Chemical Society",
title = "The current efficiency during the cathodic period of reversing current in copper powder deposition and the overall current efficiency, Iskorišćenje struje za vreme katodnog perioda reversne struje pri taloženju bakarnog praha i ukupno iskorišćenje struje",
volume = "68",
number = "8-9",
pages = "649-656",
doi = "10.2298/JSC0309649P"
}

Pavlović, M., Nikolić, N. D.,& Popov, K. I.. (2003). The current efficiency during the cathodic period of reversing current in copper powder deposition and the overall current efficiency. in Journal of the Serbian Chemical Society
Serbian Chemical Society., 68(8-9), 649-656.
https://doi.org/10.2298/JSC0309649P

Pavlović M, Nikolić ND, Popov KI. The current efficiency during the cathodic period of reversing current in copper powder deposition and the overall current efficiency. in Journal of the Serbian Chemical Society. 2003;68(8-9):649-656.
doi:10.2298/JSC0309649P .

Pavlović, Miomir, Nikolić, Nebojša D., Popov, Konstantin I., "The current efficiency during the cathodic period of reversing current in copper powder deposition and the overall current efficiency" in Journal of the Serbian Chemical Society, 68, no. 8-9 (2003):649-656,
https://doi.org/10.2298/JSC0309649P . .

TY  - JOUR
AU  - Popov, Konstantin I.
AU  - Nikolić, Nebojša D.
AU  - Rakočević, Zlatko Lj.
PY  - 2002
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/57
AB  - Electrochemically deposited copper powders, which are formed of particles of different size and morphology, are characterized by some properties like specific surface and apparent density. Aprocedure of the determination of a representative powder particle, exhibiting the same values of specific surface and apparent density as the powder is proposed. The proposed procedure also permints an explanation of the branching of copper dendrites.
AB  - Elektrohemijski istaloženi prahovi bakra se formiraju od čestica različitih dimenzija i morfologije su okarakterisani nekim osobinama kao što su specifična površina i prividna gustina (nasipna masa). Predložen je postupak određivanja reprezentativne čestice praha, koja ima iste vrednosti specifične površine i prividne gustine kao prah. Predložen postupak takođe omogućuje objašnjenje grananja dendrita bakra.
PB  - Serbian Chemical Society
T2  - Journal of the Serbian Chemical Society
T1  - The representative particle of copper powder and branch of copper dendrites
T1  - Reprezentativna čestica bakarnog praha i grananje dendrita bakra
VL  - 67
IS  - 12
SP  - 861
EP  - 866
DO  - 10.2298/JSC0212861P
ER  - 

@article{
author = "Popov, Konstantin I. and Nikolić, Nebojša D. and Rakočević, Zlatko Lj.",
year = "2002",
abstract = "Electrochemically deposited copper powders, which are formed of particles of different size and morphology, are characterized by some properties like specific surface and apparent density. Aprocedure of the determination of a representative powder particle, exhibiting the same values of specific surface and apparent density as the powder is proposed. The proposed procedure also permints an explanation of the branching of copper dendrites., Elektrohemijski istaloženi prahovi bakra se formiraju od čestica različitih dimenzija i morfologije su okarakterisani nekim osobinama kao što su specifična površina i prividna gustina (nasipna masa). Predložen je postupak određivanja reprezentativne čestice praha, koja ima iste vrednosti specifične površine i prividne gustine kao prah. Predložen postupak takođe omogućuje objašnjenje grananja dendrita bakra.",
publisher = "Serbian Chemical Society",
journal = "Journal of the Serbian Chemical Society",
title = "The representative particle of copper powder and branch of copper dendrites, Reprezentativna čestica bakarnog praha i grananje dendrita bakra",
volume = "67",
number = "12",
pages = "861-866",
doi = "10.2298/JSC0212861P"
}

Popov, K. I., Nikolić, N. D.,& Rakočević, Z. Lj.. (2002). The representative particle of copper powder and branch of copper dendrites. in Journal of the Serbian Chemical Society
Serbian Chemical Society., 67(12), 861-866.
https://doi.org/10.2298/JSC0212861P

Popov KI, Nikolić ND, Rakočević ZL. The representative particle of copper powder and branch of copper dendrites. in Journal of the Serbian Chemical Society. 2002;67(12):861-866.
doi:10.2298/JSC0212861P .

Popov, Konstantin I., Nikolić, Nebojša D., Rakočević, Zlatko Lj., "The representative particle of copper powder and branch of copper dendrites" in Journal of the Serbian Chemical Society, 67, no. 12 (2002):861-866,
https://doi.org/10.2298/JSC0212861P . .

TY  - JOUR
AU  - Popov, Konstantin I.
AU  - Nikolić, Nebojša D.
AU  - Rakočević, Zlatko Lj.
PY  - 2002
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/56
AB  - Apossible way for the estimation of the interfacial energy of the copper – copper sulphate solution interface is proposed. The estimated value of (2.7±0.3) J cm-2 and the derived equations which relate the specific surface of copper powder to the deposition conditions permit an estimation of the specific surface of copper powderc The agreement between the estimated value and literature data is very good.
AB  - Predložen je mogući način za procenu međupovršinske energije bakar – rastvor bakar sulfata. Procenjena vrednost od (2,7±0,3) J cm-2 i izvedene jednačine koje povezuju specifičnu površinu bakarnog praha i uslova taloženja dozvoljavaju procenu specifične površine bakarnog praha. Slaganje između procenjene vrednosti i literaturnih podataka je veoma dobro.
PB  - Serbian Chemical Society
T2  - Journal of the Serbian Chemical Society
T1  - An estimation of the interfacial energy of the copper-copper sulphate solution interface and of the specific surface of copper powder
T1  - Procena međupovršinske energije bakar-rastvor bakar sulfata i specifične površine bakarnog praha
VL  - 67
IS  - 8-9
SP  - 635
EP  - 638
DO  - 10.2298/JSC0209635P
ER  - 

@article{
author = "Popov, Konstantin I. and Nikolić, Nebojša D. and Rakočević, Zlatko Lj.",
year = "2002",
abstract = "Apossible way for the estimation of the interfacial energy of the copper – copper sulphate solution interface is proposed. The estimated value of (2.7±0.3) J cm-2 and the derived equations which relate the specific surface of copper powder to the deposition conditions permit an estimation of the specific surface of copper powderc The agreement between the estimated value and literature data is very good., Predložen je mogući način za procenu međupovršinske energije bakar – rastvor bakar sulfata. Procenjena vrednost od (2,7±0,3) J cm-2 i izvedene jednačine koje povezuju specifičnu površinu bakarnog praha i uslova taloženja dozvoljavaju procenu specifične površine bakarnog praha. Slaganje između procenjene vrednosti i literaturnih podataka je veoma dobro.",
publisher = "Serbian Chemical Society",
journal = "Journal of the Serbian Chemical Society",
title = "An estimation of the interfacial energy of the copper-copper sulphate solution interface and of the specific surface of copper powder, Procena međupovršinske energije bakar-rastvor bakar sulfata i specifične površine bakarnog praha",
volume = "67",
number = "8-9",
pages = "635-638",
doi = "10.2298/JSC0209635P"
}

Popov, K. I., Nikolić, N. D.,& Rakočević, Z. Lj.. (2002). An estimation of the interfacial energy of the copper-copper sulphate solution interface and of the specific surface of copper powder. in Journal of the Serbian Chemical Society
Serbian Chemical Society., 67(8-9), 635-638.
https://doi.org/10.2298/JSC0209635P

Popov KI, Nikolić ND, Rakočević ZL. An estimation of the interfacial energy of the copper-copper sulphate solution interface and of the specific surface of copper powder. in Journal of the Serbian Chemical Society. 2002;67(8-9):635-638.
doi:10.2298/JSC0209635P .

Popov, Konstantin I., Nikolić, Nebojša D., Rakočević, Zlatko Lj., "An estimation of the interfacial energy of the copper-copper sulphate solution interface and of the specific surface of copper powder" in Journal of the Serbian Chemical Society, 67, no. 8-9 (2002):635-638,
https://doi.org/10.2298/JSC0209635P . .

TY  - JOUR
AU  - Popov, Konstantin I.
AU  - Nikolić, Nebojša D.
AU  - Rakočević, Zlatko Lj.
PY  - 2002
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/50
AB  - In metal electrodeposition in the limiting diffusion current density range the deposition current density remains constant regardless of the deposition overpotential used. At the same time, the larger the deposition overpotential is the more disperse is the formed deposit, which is characterised by an increased specific surface. The difference in the specific surface of disperse deposits obtained at two different overpotentials in the limiting diffusion current density range is correlated with the difference between the deposition overpotentials. A method for the estimation of the surface tension of solid copper in copper sulfate solutions is also proposed.
AB  - Granična difuziona struja kod elektrohemijskog taloženja metala ne zavisi od primenjene prenapetosti u oblasti pune difuzione kontrole procesa. U isto vreme povećanje prenapetosti taloženja dovodi do nastajanja taloga veće specifične površine. Razlika specifične površine taloga dobijene na dve prenapetosti u oblasti pune difuzione kontrole procesa je povezana sa odgovarajućom razlikom prenapetosti i predložen je metod ocene površinskog napona čvrstog bakra u rastvorima bakar-sulfata.
PB  - Serbian Chemical Society
T2  - Journal of the Serbian Chemical Society
T1  - The estimation of solid copper surface tension in copper sulfate solutions
T1  - Procena vrednost i površinskog napona čvrstog bakra u rastvorima bakar-sulfata
VL  - 67
IS  - 11
SP  - 769
EP  - 775
DO  - 10.2298/JSC0211769P
ER  - 

@article{
author = "Popov, Konstantin I. and Nikolić, Nebojša D. and Rakočević, Zlatko Lj.",
year = "2002",
abstract = "In metal electrodeposition in the limiting diffusion current density range the deposition current density remains constant regardless of the deposition overpotential used. At the same time, the larger the deposition overpotential is the more disperse is the formed deposit, which is characterised by an increased specific surface. The difference in the specific surface of disperse deposits obtained at two different overpotentials in the limiting diffusion current density range is correlated with the difference between the deposition overpotentials. A method for the estimation of the surface tension of solid copper in copper sulfate solutions is also proposed., Granična difuziona struja kod elektrohemijskog taloženja metala ne zavisi od primenjene prenapetosti u oblasti pune difuzione kontrole procesa. U isto vreme povećanje prenapetosti taloženja dovodi do nastajanja taloga veće specifične površine. Razlika specifične površine taloga dobijene na dve prenapetosti u oblasti pune difuzione kontrole procesa je povezana sa odgovarajućom razlikom prenapetosti i predložen je metod ocene površinskog napona čvrstog bakra u rastvorima bakar-sulfata.",
publisher = "Serbian Chemical Society",
journal = "Journal of the Serbian Chemical Society",
title = "The estimation of solid copper surface tension in copper sulfate solutions, Procena vrednost i površinskog napona čvrstog bakra u rastvorima bakar-sulfata",
volume = "67",
number = "11",
pages = "769-775",
doi = "10.2298/JSC0211769P"
}

Popov, K. I., Nikolić, N. D.,& Rakočević, Z. Lj.. (2002). The estimation of solid copper surface tension in copper sulfate solutions. in Journal of the Serbian Chemical Society
Serbian Chemical Society., 67(11), 769-775.
https://doi.org/10.2298/JSC0211769P

Popov KI, Nikolić ND, Rakočević ZL. The estimation of solid copper surface tension in copper sulfate solutions. in Journal of the Serbian Chemical Society. 2002;67(11):769-775.
doi:10.2298/JSC0211769P .

Popov, Konstantin I., Nikolić, Nebojša D., Rakočević, Zlatko Lj., "The estimation of solid copper surface tension in copper sulfate solutions" in Journal of the Serbian Chemical Society, 67, no. 11 (2002):769-775,
https://doi.org/10.2298/JSC0211769P . .